ASTM E 177 : 2014 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Available format(s)
PDF
Superseded date
19-02-2020
Language(s)
English
Published date
01-05-2014
CONTAINED IN VOL. 14.02, 2015 Defines concepts which are necessary for understanding the terms 'precision' and 'bias' as used in quantitative test methods.
1.1The purpose of this practice is to present concepts necessary to the understanding of the terms “precision” and “bias” as used in quantitative test methods. This practice also describes methods of expressing precision and bias and, in a final section, gives examples of how statements on precision and bias may be written for ASTM test methods.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| Committee |
E 11
|
| DevelopmentNote |
Supersedes ASTM C 1095 (12/2001)
|
| DocumentType |
Redline
|
| Pages |
16
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 8040 : 2017 | Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 2 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 7577 : 2012 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| ASTM C 1215 : 1992 : R1997 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
| ASTM D 7471 : 2009 : R2014 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 6641 : 2001 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
| ASTM D 7476 : 2008 : R2013 | Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins |
| ASTM D 7570 : 2017 : REDLINE | Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM D 5158 : 1998 | Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM E 834 : 2009 : R2015 | Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger |
| ASTM D 2065 : 2003 : R2017 | Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
| ASTM C 1123/C1123M : 1990 : R2009 : EDT 1 | Standard Test Method for Compressibility and Recovery of Asbestos |
| ASTM E 1323 : 2015 : REDLINE | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM E 1965 : 1998 : R2009 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM C 1120 : 1998 : R2002 | Standard Test Method for Wash Test of Asbestos |
| BS ISO 15573:1998 | Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV |
| ASTM D 7488 : 2011 : R2016 | Standard Test Method for Open Time of Latex Paints |
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM E 660 : 1990 : R2015 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM E 456 : 2013 | Standard Terminology Relating to Quality and Statistics |
| ISO 15559:1998 | Practice for use of a radiochromic optical waveguide dosimetry system |
| ASTM B 975 : 2015 | Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method) |
| ASTM C 165 : 2007 : R2017 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
| ASTM C 794 : 2018 : REDLINE | Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
| ASTM D 1155 : 2010 | Standard Test Method for Roundness of Glass Spheres |
| ASTM D 5768 : 2002 : R2014 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| ASTM D 5158 : 1998 : R2005 | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM G 141 : 2009 | Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials |
| ASTM D 4164 : 2013 | Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers |
| ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM F 3030 : 2013 | Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts |
| ASTM C 1326 : 2013 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
| ASTM D 7637 : 2010 : R2015 | Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM E 456 : 2013 : REV A | Standard Terminology Relating to Quality and Statistics |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| ASTM E 606/E606M : 2012 : REDLINE | Standard Test Method for Strain-Controlled Fatigue Testing |
| ASTM D 7426 : 2008 | Standard Test Method for Assignment of the DSC Procedure for Determining T<sub>g</sub> of a Polymer or an Elastomeric Compound |
| ISO 15573:1998 | Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV |
| ASTM D 1934 : 1995 : R2005 | Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method |
| ASTM F 576 : 2001 | Standard Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry (Withdrawn 2003) |
| ASTM E 2274 : 2016 : REDLINE | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
| API 10 : 1990 | SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS |
| ASTM D 5572 : 1995 : R1999 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM C 1226 : 1993 : R2002 : EDT 1 | Standard Test Method for Soluble Chlorides in Asbestos |
| ASTM C 1226 : 1993 : R2006 | Standard Test Method for Soluble Chlorides in Asbestos (Withdrawn 2007) |
| ASTM F 3263 : 2017 | Standard Guide for Packaging Test Method Validation |
| ASTM F 1884 : 2004 : R2011 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
| ASTM D 3663 : 2003 | Standard Test Method for Surface Area of Catalysts and Catalyst Carriers |
| ASTM D 4180 : 2013 | Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| API 936 : 2014 | REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS |
| ASTM D 7521 : 2016 : REDLINE | Standard Test Method for Determination of Asbestos in Soil |
| BS ISO 15559:1998 | Practice for use of a radiochromic optical waveguide dosimetry system |
| ASTM D 7330 : 2015 : REDLINE | Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales |
| ASTM E 266 : 2017 : REDLINE | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM C 1123 : 1990 : R1999 | Standard Test Method for Compressibility and Recovery of Asbestos |
| ASTM D 7819 : 2012 : R2016 | Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins |
| ASTM E 2677 : 2014 | Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM F 735 : 2017 : REDLINE | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM D 6739 : 2011 : R2015 | Standard Test Method for Silica—pH Value |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM D 7234 : 2012 : REDLINE | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 2124 : 1999 : R2011 | Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique (Withdrawn 2020) |
| ASTM D 628/D628M : 1995 : R2017 | Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022) |
| ASTM E 2694 : 2016 : REDLINE | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM D 8007 : 2015 | Standard Test Method for Wale and Course Count of Weft Knitted Fabrics |
| ASTM F 2082 : 2015 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM D 4735 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF TRACE THIOPHENE IN REFINED BENZENE BY GAS CHROMATOGRAPHY |
| ASTM D 3529 : 2016 | Standard Test Methods for Constituent Content of Composite Prepreg |
| ASTM E 1927 : 1998 : R2018 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM D 5757 : 2011 : R2017 | Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets |
| ASTM E 1205 : 2009 | PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
| ASTM D 1894 : 2014 : REDLINE | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D 1065 : 1996 : R2001 | Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
| ASTM E 3047 : 2016 | Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry |
| ASTM C 1121/C1121M : 2004 : R2009 : EDT 1 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM D 6463 : 1999 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM D 6761 : 2017 : REDLINE | Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers |
| ASTM D 6631 : 2005 | Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
| ASTM D 1585 : 2015 : REDLINE | Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products |
| ASTM E 1617 : 2009 | Standard Practice for Reporting Particle Size Characterization Data |
| ASTM C 1162 : 1990 : R2004 : EDT 1 | Standard Test Method for Loose Density of Asbestos |
| ASTM D 7313 : 2013 : REDLINE | Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry |
| AASHTO R 10 : 2006 : R2011 | PRACTICE FOR DEFINITION OF TERMS RELATED TO QUALITY AND STATISTICS AS USED IN HIGHWAY CONSTRUCTION |
| ASTM D 7637 : 2010 | Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) |
| ASTM D 7151 : 2015 : REDLINE | Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 5751 : 1999 : R2005 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 7005/D7005M : 2016 : REDLINE | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM C 1122 : 1990 : R1999 | Standard Test Method for Wet Volume of Asbestos |
| ASTM F 2385 : 2015 : REDLINE | Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs |
| ASTM F 1520 : 1994 : R2003 | Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges |
| ASTM D 3552 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
| ASTM D 4058 : 1996 : R2001 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM A 428/A428M : 2010 : R2014 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
| ASTM C 1419 : 2014 : REDLINE | Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus |
| AASHTO T 192 : 2011 | METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY THE 45-[MU]M (NO. 325) SIEVE |
| ASTM E 132 : 2017 : REDLINE | Standard Test Method for Poisson’s Ratio at Room Temperature |
| ASTM E 1082 : 1990 : R1995 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM C 469/C469M : 2014 : REDLINE | Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression |
| ASTM D 7855/D7855M : 2013 : R2017 | Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation |
| ASTM D 3530/D3530M : 1997 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ASTM F 1802 : 2015 : REDLINE | Standard Test Method for Performance Testing of Excess Flow Valves |
| ASTM D 7766/D7766M : 2016 : REDLINE | Standard Practice for Damage Resistance Testing of Sandwich Constructions |
| ASTM C 393/C393M : 2016 : REDLINE | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
| ASTM C 739 : 2017 : REDLINE | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 4284 : 2012 : R2017 : EDT 1 | Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry |
| ASTM D 5757:2011 | Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets |
| ASTM F 2634 : 2015 : REDLINE | Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method |
| ASTM D 4781 : 2003 | Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM G 150 : 2013 | Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels |
| ASTM E 2455 : 2006 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels |
| ASTM D 5594 : 1998 : R2004 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM F 2980 : 2013 | Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF) |
| ASTM C 1125 : 1989 : R2009 | Standard Test Method for Penetration Index of Asbestos |
| ASTM C 1291 : 2018 : REDLINE | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
| ASTM E 1574 : 1998 : R2006 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM E 1356 : 2008 : R2014 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023) |
| ASTM E 1965 : 1998 : R2016 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM D 5824 : 1998 : R2017 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 6607 : 2000 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM E 2832 : 2012 | Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R<inf>L-2</inf>) |
| ASTM D 3773/D3773M : 2010 : R2014 | Standard Test Methods for Length of Woven Fabric |
| ASTM F 948 : 1994 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM D 7466/D7466M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Asperity Height of Textured Geomembranes |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM E 1651 : 1994 : R2004 | Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004) |
| ASTM D 5154/D5154M : 2018 | Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
| ASTM D 7681:2011 | Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer |
| ASTM D 6415/D6415M : 2006 : REV A : EDT 1 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM C 473 : 2017 : REDLINE | Standard Test Methods for Physical Testing of Gypsum Panel Products |
| ASTM G 73 : 2010 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM C 596 : 2009 : R2017 | Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement |
| ASTM D 3249 : 1995 : R2000 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 3670 : 1991 : R2001 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM D 7983 : 2017 | Standard Test Method for Shrinkage of Carpet Backing Fabrics |
| ASTM F 1284 : 2009 : R2016 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM E 572 : 2013 : REDLINE | Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM D 4512 : 2003 : R2013 : EDT 1 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
| ASTM D 5681 : 2017-09 | TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT |
| ASTM D 2589/D2589M : 1988 : R2011 : EDT 1 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 7767 : 2011 | Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 5827 : 2009 : EDT 1 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM E 3124 : 2017 | Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose |
| ASTM D 5280 : 1996 : R2007 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 6004 : 2004 : R2011 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020) |
| ASTM D 1996 : 1997 : R2003 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009) |
| ASTM D 4460 : 1997 : R2015 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
| ASTM C 1735 : 2017 : REDLINE | Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation |
| ASTM F 2826 : 2014 | Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units |
| ASTM D 2344/D2344M : 2016 : REDLINE | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ASTM F 1498 : 2008 : R2012 : EDT 1 | Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings |
| ASTM D 2752 : 1988 : R2002 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM A 977/A977M : 2007 : R2013 | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs |
| ASTM D 7084 : 2004 : R2009 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM E 2655 : 2014 : REDLINE | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
| ASTM C 1427 : 2016 : REDLINE | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM D 5768 : 2002 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| ASTM F 3004 : 2013 : EDT 1 | Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| ASTM D 2809 : 2009 : R2017 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM E 2161 : 2015 : REDLINE | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
| ASTM E 660 : 1990 : R2007 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM D 7245 : 2009 : R2014 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
| ASTM C 1120 : 1998 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 5831 : 2017 : REDLINE | Standard Practice for Screening Fuels in Soils |
| ASTM D 4430 : 2000 : R2015 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM E 1310 : 2004 | PRACTICE FOR USE OF A RADIOCHROMIC OPTICAL WAVEGUIDE DOSIMETRY SYSTEM |
| ASTM F 2199:2009 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM D 6631 : 2005 : R2015 | Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
| ASTM D 7137/D7137M : 2017 : REDLINE | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
| ASTM D 3594 : 1993 : R2000 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| ASTM D 4460 : 1997 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
| ASTM F 1632 : 2003 : R2018 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM F 1326 : 2002 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM E 1651 : 1994 : R1999 | Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry |
| ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 7565/D7565M : 2010 : R2017 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
| ASTM C 1109 : 2010 | Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry |
| ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM D 4642 : 2004 : R2016 | Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
| ASTM D 5379/D5379M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM D 7136/D7136M : 2015 : REDLINE | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
| ASTM D 6464 : 2003 : REV A : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1162 : 1990 : R1999 | Standard Test Method for Loose Density of Asbestos |
| ASTM C 394/C394M : 2016 : REDLINE | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
| ASTM D 4058 : 1996 : R2006 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM D 4058 : 1996 : R2011 : EDT 1 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM D 6792 : 2017 : REDLINE | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
| ASTM E 1574 : 1998 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM D 5528 : 2013 : REDLINE | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 2947/D2947M : 1988 : R2011 : EDT 1 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 2809 : 2009 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 7905/D7905M : 2014 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 7515 : 2009 | Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method) |
| ASTM B 795 : 2013 : REDLINE | Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials |
| ASTM E 1326 : 2015-07 | GUIDE FOR EVALUATING NON-CULTURE MICROBIOLOGICAL TESTS |
| ASTM F 820 : 2017-10 | TEST METHOD FOR MEASURING AIR PERFORMANCE CHARACTERISTICS OF CENTRAL VACUUM CLEANING SYSTEMS |
| ASTM D 7084:2004 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM D 7708 : 2014 : REDLINE | Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks |
| ASTM F 1888 : 2009 | Test Method for Compression-Displacement of Baseballs and Softballs |
| ASTM E 2832 : 2012 : R2017 | Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R<inf>L-2</inf >) |
| ASTM F 1593 : 2008 : R2016 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer (Withdrawn 2023) |
| ASTM D 1140 : 2017 : REDLINE | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 4179 : 2011 : R2017 | Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers |
| ASTM D 2369 : 2010 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM C 1519 : 2010 | Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
| ASTM D 3364 : 1999 | Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
| ASTM D 4430 : 2000 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM D 7811 : 2013 | Standard Test Method for Bow and Skew Using a Measuring Tool |
| ASTM E 1918 : 2006 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM C 1259 : 2015 : REDLINE | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM F 3136 : 2015 | Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method |
| ASTM E 2546 : 2015 : REDLINE | Standard Practice for Instrumented Indentation Testing |
| ASTM D 5280 : 1996 : R2001 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM E 3116 : 2018 | Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers |
| ASTM E 660 : 1990 : R2002 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM F 380 : 1977 : R1989 | Test Method for Effective Fluorescent Lifetime of Neodymium-Doped Laser Materials (Withdrawn 1994) |
| ASTM D 4796 : 2017 : REDLINE | Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials |
| ASTM D 2865 : 2001 | Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing |
| ASTM D 4463 : 1996 : R2006 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 4562 : 2001 : R2013 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM E 1260 : 2003 : R2009 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| ASTM F 1645/F1645M : 2016 : REDLINE | Standard Test Method for Water Migration in Honeycomb Core Materials |
| ASTM C 366/C366M : 2016 : REDLINE | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
| ASTM E 2269 : 2014 : REDLINE | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography |
| ASTM D 6900 : 2010 | Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM D 7682 : 2017 : REDLINE | Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty |
| ASTM E 2782 : 2017 : REDLINE | Standard Guide for Measurement Systems Analysis (MSA) |
| ASTM F 1630 : 2000 | Standard Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003) |
| ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
| ASTM D 5824 : 1998 : R2003 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM C 958 : 1992 : R2014 | Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation |
| ASTM F 2157 : 2009-02 | SPECIFICATION FOR SYNTHETIC SURFACED RUNNING TRACKS |
| ASTM D 3465 : 2014 : REDLINE | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 6130 : 2011 : R2018 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 6150 : 2016 : REDLINE | Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
| ASTM C 747 : 2016 : REDLINE | Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
| ASTM D 6175 : 2003 : R2008 | Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
| ASTM C 1512 : 2010 : R2015 : EDT 1 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| ASTM D 4621 : 1999 | Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke |
| ASTM D 5594 : 1998 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM D 5403 : 1993 : R1998 | Standard Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM C 198 : 2009 : R2019 | Standard Test Method for Cold Bonding Strength of Refractory Mortar |
| ASTM C 1121 : 2004 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM D 7817 : 2012 | Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins |
| ASTM D 5357 : 2003 : R2008 : EDT 1 | Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction |
| ASTM F 1515 : 2015 : REDLINE | Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change |
| ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
| ASTM D 1996 : 1997 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) |
| ASTM D 7078/D7078M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
| ASTM D 1977 : 2016 : REDLINE | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM D 6607 : 2000 : R2009 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM D 3906 : 2003 | Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials |
| ASTM E 855 : 2008 | Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
| ASTM D 1065 : 1996 : R2006 | Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
| ASTM G 143 : 2003 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
| ASTM F 948 : 1994 : R2011 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018) |
| ASTM A 1013 : 2000 : R2005 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| BS EN ISO 13500 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| ASME PTC22 : 2014 | GAS TURBINES |
| ASTM E 3061 : 2017 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
| ASTM D 3530M : 1997 : R2008 : EDT 1 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ASTM D 6641 : 2001 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
| ASTM G 51 : 1995 : R2005 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
| ASTM C 50/C50M : 2013 : REDLINE | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
| ASTM F 1951 : 2014 : REDLINE | Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment |
| ASTM G 143 : 2003 : R2009 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
| ASTM D 3800 : 2016 : REDLINE | Standard Test Method for Density of High-Modulus Fibers |
| ASTM D 7336/D7336M : 2016 : REDLINE | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
| ASTM C 1123/C1123M : 1990 : R2015 | Standard Test Method for Compressibility and Recovery of Asbestos (Withdrawn 2021) |
| ASTM D 3594 : 1993 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| ASTM G 122 : 1996 : R2002 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
| ASTM E 2994 : 2016 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM F 2609 : 2011 | Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners |
| ASTM C 1120/C1120M : 1998 : R2011 : EDT 1 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 5934 : 2002 | Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009) |
| ASTM E 1027 : 1992 | Practice for Exposure of Polymeric Materials to Ionizing Radiation (Withdrawn 1996) |
| BS ISO 15571:1998 | Practice for dosimetry in a gamma irradiation facility for radiation processing |
| ASTM D 5572 : 1995 : R2005 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| AASHTO R 10 : 2006 : R2011 | PRACTICE FOR DEFINITION OF TERMS RELATED TO QUALITY AND STATISTICS AS USED IN HIGHWAY CONSTRUCTION |
| 04/30118688 DC : DRAFT AUG 2004 | BS ISO ASTM 51707 - GUIDE FOR ESTIMATING UNCERTAINTIES IN DOSIMETRY FOR RADIATION PROCESSING |
| ASTM F 1520 : 1994 : R1999 | Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges |
| ASTM F 3287 : 2017 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
| ASTM C 1162/C1162M : 1990 : R2009 : EDT 1 | Standard Test Method for Loose Density of Asbestos |
| ASTM D 6195 : 2003 : EDT 1 | Standard Test Methods for Loop Tack |
| ASTM D 7472 : 2009 : R2014 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 6607 : 2000 : R2005 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| IES RP 27.3:2017 | Recommended Practice for Photobiological Safety for Lamps – Risk Group Classification and Labeling |
| ASTM D 4430 : 2000 : R2010 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM D 628 : 1995 : R2004 : EDT 1 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 3364 : 1999 : R2011 | Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
| ASTM E 2532 : 2009 | Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices |
| ASTM E 691 : 2018 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| 04/30109488 DC : DRAFT AUG 2004 | BS ISO ASTM 51650 - PRACTICE FOR USE OF CELLULOSE ACETATE DOSIMETRY SYSTEM |
| ASTM D 8032 : 2016 | Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
| ASTM F 1326 : 2002 : R2006 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM D 7372 : 2017 : REDLINE | Standard Guide for Analysis and Interpretation of Proficiency Test Program Results |
| ASTM C 596 : 2009 | Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement |
| ASTM C 1421 : 2018 : REDLINE | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
| ASTM E 826 : 2014 : REDLINE | Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry |
| 07/30148827 DC : 0 | BS EN ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| ASTM C 271/C271M : 2016 : REDLINE | Standard Test Method for Density of Sandwich Core Materials |
| ASTM D 4607 : 2014 : REDLINE | Standard Test Method for Determination of Iodine Number of Activated Carbon |
| ASTM C 1275 : 2018 : REDLINE | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| ASTM D 6843 : 2010 : R2015 | Standard Test Method for Silanes Used in Rubber Formulations <brk/>(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) |
| ASTM D 6913 : 2004 : R2009 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| 04/30108676 DC : 0 | ISO 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY |
| ASTM D 4685/D4685M : 2015 : REDLINE | Standard Test Method for Pile Fabric Abrasion |
| ASTM D 7043 : 2017 : REDLINE | Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
| ASTM G 176 : 2003 : R2009 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method |
| ASTM E 2489 : 2016 : REDLINE | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
| ASTM B 636/B636M : 2015 : REDLINE | Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer |
| ASTM C 1512 : 2010 : R2015 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| ASTM E 839 : 2011 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
| ASTM D 4 : 1986 : R2004 | Standard Test Method for Bitumen Content |
| ASTM D 6647 : 2001 : R2006 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM D 6607 : 2000 : R2015 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM D 2238 : 1992 : R2004 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ASTM D 3039/D3039M : 2017 : REDLINE | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM C 1226 : 1993 : R1998 : EDT 1 | Standard Test Method for Soluble Chlorides in Asbestos |
| ASTM F 1888 : 2009 : R2016 | Standard Test Method for Compression-Displacement of Baseballs and Softballs |
| ASTM C 469 : 2002 : EDT 1 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM A 833 : 2017 : REDLINE | Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM C 695 : 2015 : REDLINE | Standard Test Method for Compressive Strength of Carbon and Graphite |
| ASTM C 459 : 1997 | Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM D 5768 : 2002 : R2010 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| ASTM D 8028 : 2017 | Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID) |
| ASTM C 1121/C1121M : 2004 : R2015 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021) |
| ASTM D 3906 : 2003 : R2013 | Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials |
| ASTM D 7661 : 2010 | Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| ASTM D 7744/D7744M : 2011 | Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes |
| ASTM D 4512 : 2003 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
| ASTM D 7883 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography |
| ASTM F 2476 : 2013 : REDLINE | Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO<sub>2</sub>TR) Through Barrier Materials Using An Infrared Detector |
| ASTM E 2402 : 2011 | Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers |
| ASTM D 4513 : 2011 : R2017 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
| ASTM D 6576 : 2013 : REDLINE | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| ASTM D 4782 : 2010 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
| ASTM D 4562 : 2001 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 8066/D8066M : 2017 | Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
| ASTM D 4699 : 2003 : R2008 | Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles |
| ASTM C 596 : 2009 : EDT 1 | Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement |
| ASTM C 1182 : 2009 | Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
| ASTM D 5449/D5449M : 2016 : REDLINE | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 6641 : 2001e1 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
| ASTM E 2931 : 2013 | Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds |
| ASTM F 2609 : 2011 : R2015 | Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners |
| ASTM D 3670 : 1991 : R1996 : EDT 1 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM F 108 : 1988 : EDT 1 | Test Method for Resistivity of Silicon Epitaxial Layers by the Three-Probe Voltage Breakdown Method (Withdrawn 1993) |
| ASTM F 3139 : 2015 | Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM B 648 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM G 143 : 2003 : R2004 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
| ASTM D 4781 : 2003 : R2013 | Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
| ASTM C 1125 : 1989 : R2004 | Standard Test Method for Penetration Index of Asbestos |
| ASTM D 1822 : 2013 : REDLINE | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
| ASTM D 6175 : 2003 : R2013 | Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
| ASTM D 4463 : 1996 : R2001 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM G 51 : 1995 : R2000 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
| ASTM D 5768 : 2002 : R2006 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| NACE SP 05 08 : 2010 | METHODS OF VALIDATING EQUIVALENCE TO ISO 8502-9 ON MEASUREMENT OF THE LEVELS OF SOLUBLE SALTS |
| ASTM D 7504 : 2018 : REDLINE | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 1518 : 2014 : REDLINE | Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate |
| ASTM D 2868 : 2017 | Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White |
| AASHTO T 129 : 2014(R2018) | METHOD OF TEST FOR AMOUNT OF WATER REQUIRED FOR NORMAL CONSISTENCY OF HYDRAULIC CEMENT PASTE |
| ASTM C 1326 : 2013 : R2018 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
| ASTM D 3639 : 1992 : R2002 : EDT 2 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM D 5824 : 1998 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM E 1875 : 2013 : REDLINE | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
| ASTM D 1934 : 1995 : R2000 | Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method |
| ASTM D 4481 : 2010 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM D 7250/D7250M : 2016 : REDLINE | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
| ASTM D 5280 : 1996 : R2013 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 4430 : 2000 : EDT 1 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| ASTM D 7884 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography |
| ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
| ASTM G 176 : 2003 : R2017 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method |
| ASTM E 1702 : 2013 | PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING |
| ASTM D 4944 : 2018 : REDLINE | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM C 1371 : 2015 : REDLINE | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM D 2369 : 2010 | Standard Test Method for Volatile Content of Coatings |
| ASTM A 1038 : 2017 : REDLINE | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
| ASTM D 3908 : 2003 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method |
| ASTM E 2591 : 2007 : R2013 | Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians |
| ASTM D 4562 : 2001 : R2007 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM C 364/C364M : 2016 : REDLINE | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
| ASTM D 7084 : 2004 : R2017 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM E 1868 : 2010 : R2015 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
| ASTM D 7882 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode |
| ASTM F 2961 : 2015 : REDLINE | Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
| ASTM D 5758 : 2001 : R2007 : EDT 1 | Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
| ASTM G 72/G72M : 2015 : REDLINE | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| ASTM D 2862 : 2016 : REDLINE | Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
| ASTM D 7304 : 2016 : REDLINE | Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC |
| ASTM D 6862 : 2011 : R2016 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D 3594 : 1993 : R2006 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
| ASTM D 4463/D4463M : 1996 : R2013 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 5649 : 2015 : REDLINE | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM E 1260 : 2003 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| ASTM D 4085 : 1993 : R2013 | Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM D 2124 : 1999 : R2004 | Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique |
| ASTM D 2369 : 2010 : R2015 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 7736 : 2012 : R2018 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM F 3078 : 2015 | Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF) |
| ASTM F 2607 : 2008 : R2014 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM D 1155 : 2010 : R2015 | Standard Test Method for Roundness of Glass Spheres |
| ASTM D 5403 : 1993 : R2013 | Standard Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM B 769 : 2011 : R2016 | Standard Test Method for Shear Testing of Aluminum Alloys |
| ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
| ASTM D 4365 : 2013 : REDLINE | TEST METHOD FOR DETERMINING MICROPORE VOLUME AND ZEOLITE AREA OF A CATALYST |
| ASTM D 2124 : 1999 : EDT 1 | Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique |
| ASTM D 6115 : 1997 : R2004 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 6739 : 2011 | Standard Test Method for Silica<char: emdash>pH Value |
| ASTM D 3529/D3529M : 1997 : R2003 : EDT 1 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
| ASTM E 1868 : 2010 | Standard Test Method for Loss-On-Drying by Thermogravimetry |
| ASTM D 4642 : 2004 | Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
| ASTM D 7426 : 2008 : R2013 | Standard Test Method for Assignment of the DSC Procedure for Determining T<inf>g</inf > of a Polymer or an Elastomeric Compound (Withdrawn 2022) |
| ASTM D 7476 : 2008 | Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins |
| ASTM E 3063 : 2017 : REDLINE | Test Method for Antimony Content Using Neutron Activation Analysis (NAA) |
| ASTM D 7477 : 2016 : REDLINE | Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water |
| ASTM D 6090 : 2017 : REDLINE | Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method) |
| ASTM D 7818 : 2012 : R2016 | Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 3530 : 1997 : R2015 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ASTM E 1538 : 2009 | PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
| ASTM D 7779 : 2011 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
| ASTM C 1234 : 2011 : R2016 | Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
| ASTM D 8069 : 2017 | Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending |
| ASTM D 5017 : 2017 : REDLINE | Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 5450/D5450M : 2016 : REDLINE | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 6464 : 2003 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 6844 : 2010 | Standard Test Method for Silanes Used in Rubber Formulations <br> (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC) |
| ASTM D 3529/D3529M : 1997 : R2008 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
| ASTM C 1121 : 2004 : EDT 1 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM D 3963/D3963M : 2015 : REDLINE | Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars |
| ASTM E 1965 : 1998 : R2003 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM D 8136 : 2017 | Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge |
| ASTM D 6115 : 1997 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM E 9 : 2009 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| ASTM D 5751 : 1999 : R2012 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 4512 : 2003 : R2013 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
| ASTM C 1125 : 1989 : R2004 : EDT 1 | Standard Test Method for Penetration Index of Asbestos |
| ASTM D 7635/D7635M : 2010 | Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement |
| ASTM B 887 : 2012 | Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides |
| ASTM D 5153 : 2010 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption |
| ASTM D 3663 : 2003 : R2015 | Standard Test Method for Surface Area of Catalysts and Catalyst Carriers |
| ASTM C 480/C480M : 2016 : REDLINE | Standard Test Method for Flexure Creep of Sandwich Constructions |
| ASTM E 2480 : 2012 : R2017 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands |
| ASTM C 1119 : 1990 : R2004 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM D 3159 : 2015 : REDLINE | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
| ASTM D 3663 : 2003 : R2008 | Standard Test Method for Surface Area of Catalysts and Catalyst Carriers |
| ASTM E 398 : 2013 : REDLINE | Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
| ASTM C 1125 : 1989 : R1999 : EDT 1 | Standard Test Method for Penetration Index of Asbestos |
| ASTM A 428/A428M : 2010 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
| ASTM D 3518/D3518M : 2013-09 | TEST METHOD FOR IN-PLANE SHEAR RESPONSE OF POLYMER MATRIX COMPOSITE MATERIALS BY TENSILE TEST OF A +/-45 DEGREES LAMINATE |
| ASTM D 6772/D6772M : 2016 : REDLINE | Standard Test Method for Dimensional Stability of Sandwich Core Materials |
| ASTM C 550 : 2015 : REDLINE | Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation |
| ASTM D 7639 : 2010 | Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence |
| ASTM D 5403 : 1993 : R2002 | Standard Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM E 1617 : 2009 : R2014 : EDT 1 | Standard Practice for Reporting Particle Size Characterization Data |
| ASTM D 7458 : 2014 : REDLINE | Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection |
| ASTM C 1124/C1124M : 1990 : R2009 : EDT 1 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| BS EN ISO 13501:2011 | Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation |
| I.S. EN ISO 13500:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| I.S. EN ISO 13501:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| UNI EN ISO 13501 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| ASTM E 1965 : 1998 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM C 1120 : 1998 : R2002 : EDT 1 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 8097 : 2017 | Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer |
| ASTM D 7778 : 2015 : REDLINE | Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM C 1162 : 1990 : R2004 | Standard Test Method for Loose Density of Asbestos |
| ASTM C 1606 : 2010 : R2014 | Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware |
| AASHTO T 341 : 2010 | METHOD OF TEST FOR DETERMINATION OF COMPRESSION CAPACITY FOR PROFILE WALL PLASTIC PIPE BY STUB COMPRESSION LOADING |
| ASTM B 647 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM F 218 : 2013 : REDLINE | Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
| ASTM F 2607 : 2008 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM D 6883 : 2017 : REDLINE | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
| ASTM D 4254 : 2016 : REDLINE | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 8131/D8131M : 2017 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
| ASTM F 1593 : 2008 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer |
| ASTM E 1401 : 2013 | PRACTICE FOR USE OF A DICHROMATE DOSIMETRY SYSTEM |
| ASTM E 2253 : 2016 : REDLINE | Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters |
| API 13A : 2010 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM B 769 : 2011 | Standard Test Method for Shear Testing of Aluminum Alloys |
| ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
| ASTM D 8115 : 2017 | Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader) |
| ASTM E 2402 : 2011 : R2017 | Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers |
| ASTM D 6645 : 2001 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| ASTM D 5029 : 1998 : R2014 | Standard Test Method for Water Solubles in Activated Carbon |
| ASTM E 2540 : 2016 : REDLINE | Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle |
| ASTM G 176 : 2003 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method |
| ASTM E 1710 : 2018 : REDLINE | Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer |
| ASTM E 2759 : 2010 | Standard Practice for Highway Traffic Monitoring Truth-in-Data |
| ASTM D 2947 : 1988 : R2006 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 6264/D6264M : 2017 : REDLINE | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| ASTM C 1119/C1119M : 1990 : R2009 : EDT 1 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM U 09 : 2013 | Precision Statements in UOP Methods |
| ASTM D 465 : 2015 : REDLINE | Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products |
| ASTM D 1065 : 1996 : R2014 : EDT 1 | Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
| ASTM G 132 : 1996 | Standard Test Method for Pin Abrasion Testing |
| ASTM D 5228 : 2016 : REDLINE | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| ASTM G 174 : 2004 : R2017 | Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact |
| ASTM D 7811 : 2013 : R2017 | Standard Test Method for Bow and Skew Using a Measuring Tool |
| ASTM D 4533/D4533M : 2015 : REDLINE | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM F 978 : 2002 | Standard Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques (Withdrawn 2003) |
| 04/19987313 DC : DRAFT DEC 2004 | BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| ASTM E 517 : 2018 : REDLINE | Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
| ASTM D 7819 : 2012 | Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins |
| ASTM D 2065 : 2003 | Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
| ASTM D 6913/D6913M : 2017 : REDLINE | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| 04/30096886 DC : DRAFT JUL 2004 | ISO 13503-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES |
| ASTM D 4512 : 2003 : R2008 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
| ASTM C 459 : 1997 : R2002 | Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM G 181 : 2011 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| AASHTO T 192 : 2011(R2015) | METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY THE 45-[MU]M (NO. 325) SIEVE |
| ASTM D 3307 : 2016 : REDLINE | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
| ASTM D 4460 : 1997 : R2004 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
| ASTM D 6195 : 2003 : R2011 | Standard Test Methods for Loop Tack |
| ASTM C 549 : 2006 | Standard Specification for Perlite Loose Fill Insulation |
| BS ISO 15561:1998 | Practice for use of a dichromate dosimetry system |
| ASTM D 3529/D3529M : 1997 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
| ASTM F 1326 : 2002 : R2016 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM F 387 : 2017 : REDLINE | Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer |
| ASTM D 4 : 1986 : R1998 | Standard Test Method for Bitumen Content |
| ASTM D 4 : 1986 : R2010 | Standard Test Method for Bitumen Content |
| ASTM D 7553 : 2015 : REDLINE | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM C 165 : 2007 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
| ASTM C 1122/C1122M : 1990 : R2009 : EDT 1 | Standard Test Method for Wet Volume of Asbestos |
| ASTM D 4222 : 2003 | Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements |
| ASTM C 958 : 1992 : R1997 : EDT 1 | Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation |
| SAE J 2334 : 2016 | LABORATORY CYCLIC CORROSION TEST |
| ASTM C 1120 : 1998 : R2006 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 2867 : 2017 : REDLINE | Standard Test Methods for Moisture in Activated Carbon |
| ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM E 1926 : 2008 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM C 613M : 1997 : R2008 : EDT 1 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
| ASTM C 1122 : 1990 : R2004 | Standard Test Method for Wet Volume of Asbestos |
| ASTM F 121 : 1983 : EDT 1 | Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1989) |
| ASTM D 5467/D5467M : 1997 : R2004 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| ASTM D 7248/D7248M : 2012 : R2017 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| ASTM F 1404 : 1992 : R1999 | Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique |
| ASTM F 2944 : 2012 | Standard Test Method for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture |
| ASTM D 4430 : 2000 : R2006 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM F 2199 : 2009 : R2014 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM E 1608 : 2015 | Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV |
| ASTM D 6741 : 2010 | Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content |
| ASTM E 1707 : 2015 | GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING |
| ASTM D 5930 : 2017 : REDLINE | Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| API RP 13J : 2014 | TESTING OF HEAVY BRINES |
| ASTM D 628 : 1995 : R1999 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 3124 : 1998 : R2003 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM F 2082/F2082M : 2016 : REDLINE | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM D 7855/D7855M : 2013 | Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation |
| ASTM D 5827 : 2009 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM E 2116 : 2013 | PRACTICE FOR DOSIMETRY FOR A SELF-CONTAINED DRY-STORAGE GAMMA-RAY IRRADIATOR |
| ASTM C 1123 : 1990 : R2004 | Standard Test Method for Compressibility and Recovery of Asbestos |
| ASTM E 1060 : 1985 | PRACTICE FOR INTERLABORATORY TESTING OF SPECTROCHEMICAL METHODS OF ANALYSIS |
| ASTM C 1215 : 1992 : R2012 : EDT 1 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
| ASTM E 2916 : 2013 | Standard Terminology for Digital and Multimedia Evidence Examination |
| ASTM F 1940 : 2007 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM G 204 : 2015 : REDLINE | Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions |
| ASTM E 456 : 2013 : REV A : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3124 : 1998 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM D 2238 : 1992 : R2012 : EDT 1 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021) |
| API 13A : 2010 : INC : ERR 1 : 2014 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 5751 : 1999 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
| SAE J 1085 : 2017 | TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS |
| ASTM D 7471 : 2009 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 5755 : 2009 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading |
| ASTM D 6742/D6742M : 2017 : REDLINE | Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
| ASTM C 1819 : 2015 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
| ASTM E 1818 : 2013 | PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 80 AND 300 KEV |
| ISO 15560:1998 | Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory |
| ASTM D 628/D628M : 1995 : R2009 : EDT 1 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM G 141 : 2009 : R2013 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
| ASTM E 3151 : 2018 | Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens |
| ASTM D 8171 : 2018 | Standard Test Methods for Density Determination of Flax Fiber |
| ASTM D 7332/D7332M : 2016 : REDLINE | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite |
| ASTM F 2156 : 2017 : REDLINE | Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope |
| ASTM F 2617 : 2015 : REDLINE | Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry |
| ASTM D 5357 : 2003 | Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction |
| ASTM D 6004 : 2004 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
| ASTM D 4642 : 2004 : R2010 | Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
| ASTM D 6525/D6525M : 2018 : REDLINE | Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products |
| ASTM D 3389 : 2016 : REDLINE | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 7283 : 2017 : REDLINE | Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
| ASTM C 1114 : 2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM D 5178 : 2016 : REDLINE | Standard Test Method for Mar Resistance of Organic Coatings |
| ASTM D 5768 : 2002 : R2018 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
| ASTM F 2095 : 2007 : R2013 | Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| ASTM C 1274 : 2012 : REDLINE | Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
| ASTM F 2330 : 2004 | Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water (Withdrawn 2010) |
| ASTM F 1326 : 2002 : R2011 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM F 948 : 1994 : R2001 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM D 7488 : 2011 | Standard Test Method for Open Time of Latex Paints |
| ASTM F 3287 : 2017 : EDT 1 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
| ASTM E 262 : 2017 : REDLINE | Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques |
| ASTM D 4222 : 2003 : R2015 : EDT 1 | Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements |
| ASTM D 8020 : 2015 | Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles |
| ASTM D 3936 : 2017 : REDLINE | Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering |
| ASTM F 2828 : 2012 | Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System |
| ASTM F 1632 : 2003 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM D 4085 : 1993 : R1997 | Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM D 6817/D6817M : 2017 : REDLINE | Standard Specification for Rigid Cellular Polystyrene Geofoam |
| ASTM G 122 : 1996 : R2015 : EDT 1 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
| ASTM G 73 : 2010 : R2017 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM D 1316 : 2006 : R2011 | Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer (Withdrawn 2020) |
| ASTM D 7202 : 2015 : REDLINE | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
| ASTM D 3249 : 1995 : R2005 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM F 1888 : 2009 : R2014 | Standard Test Method for Compression-Displacement of Baseballs and Softballs |
| ASTM D 2752 : 1988 : R2006 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM F 1940 : 2007 : REV A | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM D 4621 : 1999 : R2004 | Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke (Withdrawn 2010) |
| ASTM B 886 : 2012 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
| ASTM D 6281 : 2015 : REDLINE | Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
| ASTM E 1489 : 2008 | Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM E 1956 : 2013 | PRACTICE FOR USE OF THERMOLUMINESCENCE-DOSIMETRY (TLD) SYSTEMS FOR RADIATION PROCESSING |
| ASTM A 1013 : 2000 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method |
| ASTM F 3067 : 2014 | Guide for Radial Loading of Balloon Expandable and Self Expanding Vascular Stents |
| ASTM D 4797 : 2017 : REDLINE | Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking |
| ASTM E 1772 : 1995 : R2001 | Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique (Withdrawn 2010) |
| ASTM D 3908 : 2003 : R2015 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method |
| ASTM D 7984 : 2016 | Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument |
| ASTM D 4567 : 2003 : R2008 | Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
| ASTM F 3079 : 2014 | Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities |
| ASTM D 5730 : 2004 | Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013) |
| ASTM D 7736 : 2012 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 4780 : 2012 : R2017 : EDT 1 | Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption |
| ASTM D 7264/D7264M : 2015 : REDLINE | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
| ASTM D 3492 : 2016 : REDLINE | Standard Specification for Rubber Contraceptives (Male Condoms) |
| ASTM D 6913 : 2004 : R2009 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 2589 : 1988 : R2006 : EDT 1 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM E 481 : 2016 : REDLINE | Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver |
| ASTM D 6133 : 2002 : R2014 | Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 4417 : 2014 : REDLINE | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 7028 : 2007 : EDT 1 | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
| ASTM D 7661 : 2010 : R2017 | Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| ASTM D 3639 : 1992 : R2002 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1119 : 1990 : R1995 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM F 2095 : 2007 | Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| ASTM C 363/C363M : 2016 : REDLINE | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
| ASTM C 1122 : 1990 : R2004 : EDT 1 | Standard Test Method for Wet Volume of Asbestos |
| ASTM D 7515 : 2009 : R2014 | Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method) |
| ASTM C 1226 : 1993 : R2002 | Standard Test Method for Soluble Chlorides in Asbestos |
| ASTM D 3773/D3773M : 2010 | Standard Test Methods for Length of Woven Fabric |
| ASTM E 1876 : 2015 : REDLINE | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
| ASTM D 4567 : 2003 | Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
| ASTM D 7291/D7291M : 2015 : REDLINE | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| ASTM E 2653 : 2015 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ASTM D 3364 : 1999 : R2004 | Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
| ASTM F 2569 : 2011 : REDLINE | Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use |
| ASTM F 2824 : 2010 : EDT 1 | Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids |
| ASTM D 8063 : 2018 | Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
| ASTM D 8031 : 2016 | Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration |
| ASTM D 4464 : 2015 : REDLINE | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
| ASTM F 1520 : 1994 : R2008 | Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges (Withdrawn 2015) |
| ISO 15571:1998 | Practice for dosimetry in a gamma irradiation facility for radiation processing |
| ASTM D 7027 : 2013 : REDLINE | Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine |
| ASTM G 132 : 1996 : R2007 | Standard Test Method for Pin Abrasion Testing |
| BS EN ISO 13503-3:2005 | Petroleum and natural gas industries. Completion fluids and materials Testing of heavy brines |
| ASTM D 7577 : 2012 : R2016 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| UNI EN ISO 13500 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| UNI EN ISO 13503-3 : 2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES |
| ASTM C 1122/C1122M : 1990 : R2015 | Standard Test Method for Wet Volume of Asbestos (Withdrawn 2021) |
| ASTM D 6248 : 1998 : R2004 | Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ISO 15561:1998 | Practice for use of a dichromate dosimetry system |
| ASTM E 1431 : 2005 | PRACTICE FOR DOSIMETRY IN ELECTRON AND BREMSSTRAHLUNG IRRADIATION FACILITIES FOR FOOD PROCESSING |
| ASTM D 6181 : 2003 | Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin (Withdrawn 2012) |
| AASHTO T 44 : 2014 | METHOD OF TEST FOR SOLUBILITY OF BITUMINOUS MATERIALS |
| ASTM D 2065 : 2003 : R2011 | : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
| ASTM F 948 : 1994 : R2001 : EDT 1 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM D 2197 : 2016 : REDLINE | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM C 586 : 2011 : REDLINE | TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) |
| ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM F 1632 : 2003 : R2010 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM D 3670 : 1991 : R2007 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ASTM D 4463 : 1996 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| API 13J SPANISH : 1996 | PRUEBAS CON SALMUERAS PESADAS |
| ASTM D 628 : 1995 : R2004 | Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 2947 : 1988 : R2002 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM E 2171 : 2002 : R2008 | Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record |
| ASTM D 7956/D7956M : 2016 : REDLINE | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
| ISO 15565:1998 | Practice for use of a radiochromic liquid dosimetry system |
| ASTM C 557 : 2003 : R2009 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 5357 : 2003 : R2013 | Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction |
| ISO 15572:1998 | Guide for estimating uncertainties in dosimetry for radiation processing |
| ASTM E 456 : 2013 : REV A : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| BS ISO 15572:1998 | Guide for estimating uncertainties in dosimetry for radiation processing |
| ASTM D 8130 : 2017 | Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method |
| ASTM D 6248 : 1998 | Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| BS ISO 15560:1998 | Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory |
| ASTM C 1327 : 2015 : REDLINE | TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM F 386 : 2017 : REDLINE | Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces |
| ASTM G 122 : 1996 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
| AASHTO R 44 : 2007 : R2012 | PRACTICE FOR INDEPENDENT ASSURANCE (IA) PROGRAMS |
| ASTM E 1680 : 2016 : REDLINE | Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems |
| ASTM F 3004 : 2013 | Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| ASTM E 1927 : 1998 : R2012 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM F 1884 : 2004 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
| ASTM B 648 : 2010 : R2015 : EDT 1 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM D 6463/D6463M : 2006 : R2012 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| BS ISO 15565:1998 | Practice for use of a radiochromic liquid dosimetry system |
| ASTM E 2406 : 2016 : REDLINE | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
| ASTM D 4821 : 2016 : REDLINE | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM D 6133:2002 | Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 2854 : 2009 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 1065 : 1996 | Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
| ASTM F 948 : 1994 : R2006 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM D 5029 : 1998 : R2009 | Standard Test Method for Water Solubles in Activated Carbon |
| ASTM D 545 : 2014 : REDLINE | Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
| ASTM E 1082 : 1990 : R2012 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 6130 : 2011 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4781 : 2003 : R2008 | Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
| ASTM C 1123 : 1990 : R2004 : EDT 1 | Standard Test Method for Compressibility and Recovery of Asbestos |
| ASTM E 1900 : 2009 | GUIDE FOR DOSIMETRY IN RADIATION RESEARCH ON FOOD AND AGRICULTURAL PRODUCTS |
| ASTM F 1514 : 2003 | Standard Test Method for Measuring Heat Stability of Resilient Vinyl Flooring by Color Change |
| ASTM D 3171 : 2015 : REDLINE | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM E 2792 : 2013 : REDLINE | Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion |
| ASTM D 2238 : 1992 : R1999 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ASTM D 4460 : 1997 : R2009 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
| ASTM D 3908 : 2003 : R2008 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method |
| 04/30124757 DC : DRAFT NOV 2004 | ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| ASTM F 1498 : 2008 | Standard Specification for Taper Pipe Threads 60<span class='unicode'>°</span> for Thermoplastic Pipe and Fittings |
| ASTM D 6463/D6463M : 2006 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM D 5758 : 2001 : R2015 | Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
| ASTM E 1918 : 2006 : R2015 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM D 6818 : 2018-02 | TEST METHOD FOR ULTIMATE TENSILE PROPERTIES OF ROLLED EROSION CONTROL PRODUCTS |
| ASTM D 8067/D8067M : 2017 | Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture |
| ASTM D 7964/D7964M : 2014 | Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed |
| ASTM D 7967 : 2016 | Standard Test Method for Analysis of Chrome Content (as Cr<inf>2</inf>O<inf>3</inf>) in Wet Blue using Atomic Absorption |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ASTM B 797 : 2015 : REDLINE | Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts |
| ASTM E 2141 : 2014 : REDLINE | Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units |
| ASTM D 6913 : 2004 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7616/D7616M : 2011 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
| ASTM D 7360 : 2016 : REDLINE | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration |
| ASTM F 1404 : 1992 : R2007 | Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique (Withdrawn 2016) |
| BS ISO 13501 : 2005 AMD 16886 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| ASTM D 7816 : 2012 : R2016 | Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins |
| 10/30219716 DC : 0 | BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM F 729 : 1981 : R1990 : EDT 1 | Test Methods for Temperature Coefficient of Resistance of Film Resistors (Withdrawn 1992) |
| ASTM D 7469 : 2016 : REDLINE | Standard Test Methods for End-Joints in Structural Wood Products |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| ASTM E 1356 : 2008 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
| ASTM D 5448/D5448M : 2016 : REDLINE | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM C 1763 : 2016 : REDLINE | Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials |
| ASTM E 1082 : 1990 : R2017 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 5467/D5467M : 1997 : R2010 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| ASTM D 3420 : 2014 : REDLINE | Standard Test Method for Pendulum Impact Resistance of Plastic Film |
| ASTM D 3639 : 1992 : R2006 : EDT 1 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM D 1065 : 1996 : R2010 | Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products |
| ASTM D 1353 : 2013 : REDLINE | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
| ASTM C 1119 : 1990 : R1999 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM D 1749 : 1993 : R2002 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM E 2171 : 2002 | Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record |
| ASTM E 2627 : 2013 : REDLINE | Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
| ASTM G 77 : 2017 : REDLINE | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test |
| ASTM D 8176 : 2018 | Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh) |
| ASTM D 7591 : 2012 | Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography |
| ASTM D 7818:2012 | Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins |
| ASTM F 2544 : 2011 : R2018 | Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units |
| ASTM C 459 : 1997 : R2006 | Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM D 5594 : 1998 : R2012 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM D 6132 : 2013 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 3906 : 2003 : R2008 | Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials |
| ASTM F 426 : 1981 : R1990 | Practice for Evaluating and Classifying Methods for the Analysis of Fat in Meat and Meat Products (Withdrawn 1995) |
| ASTM G 181 : 2011 : R2017 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| ASTM D 6484/D6484M : 2014 : REDLINE | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
| ASTM C 430 : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM D 6647 : 2001 : R2011 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| API 13A : 2010 : INC : ERR 3 : 2015 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 8007 : 2015 : EDT 1 | Standard Test Method for Wale and Course Count of Weft Knitted Fabrics |
| ASTM D 7423 : 2017 : REDLINE | Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection |
| ASTM G 174 : 2004 : R2009 : EDT 1 | Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact |
| AASHTO T 213M/T 213 : 1900 | METHOD OF TEST FOR MASS [WEIGHT] OF COATING ON ALUMINUM-COATED IRON OR STEEL ARTICLES |
| ASTM E 1450 : 2016 : REDLINE | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM C 365/C365M : 2016 : REDLINE | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
| ASTM D 1749 : 1993 : R2007 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Withdrawn 2010) |
| ASTM C 1285 : 2014 : REDLINE | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM C 1109 : 2010 : R2015 | Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM G 174 : 2004 | Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact |
| ASTM C 557 : 2003 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM E 1782 : 2014 : REDLINE | Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
| ASTM C 1519 : 2010 : R2017 | Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
| ASTM C 297/C297M : 2016 : REDLINE | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
| ASTM G 132 : 1996 : R2013 | Standard Test Method for Pin Abrasion Testing |
| ASTM D 2166/D2166M : 2016 : REDLINE | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
| ASTM D 3124 : 1998 : R2011 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM D 4060 : 2014 : REDLINE | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 5755 : 2009 : R2014 : EDT 1 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023) |
| ASTM D 7127 : 2017 : REDLINE | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
| ASTM G 51 : 1995 : R2012 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
| ASTM D 7028 : 2007 | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
| ASTM D 7245 : 2009 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
| ASTM C 198 : 2009 | Standard Test Method for Cold Bonding Strength of Refractory Mortar |
| ASTM F 2980 : 2013 : R2017 | Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF) |
| ASTM E 1574 : 1998 : R2014 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM D 6115 : 1997 : R2011 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 5280 : 1996 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
| ASTM C 165 : 2007 : R2012 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
| ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| ASTM D 4780 : 2012 | Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 4481 : 2010 : R2015 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM D 7615/D7615M : 2011 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
| ASTM G 98 : 2017 : REDLINE | Standard Test Method for Galling Resistance of Materials |
| ASTM D 6645 : 2001 : R2010 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| ASTM D 2589 : 1988 : R2002 : EDT 1 | Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber |
| ASTM C 557 : 2003 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1111:2010 | Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 7768 : 2012 | Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography |
| ASTM D 2589 : 1988 : R2002 | Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber |
| ASTM E 2480 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands |
| ASTM D 3249 : 1995 : R2011 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 6132 : 2013 : R2017 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 5742 : 2016 : REDLINE | Standard Test Method for Determination of Butane Activity of Activated Carbon |
| ASTM D 5795 : 2016 : REDLINE | Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus |
| ASTM D 6464 : 2003 : REV A | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1674 : 2016 : REDLINE | Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
| ASTM E 2760 : 2016 : REDLINE | Standard Test Method for Creep-Fatigue Crack Growth Testing |
| ASTM E 1927 : 1998 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1927 : 1998 : R2003 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM D 4058 : 1996 : R2015 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM D 1683/D1683M : 2017-04 | TEST METHOD FOR FAILURE IN SEWN SEAMS OF WOVEN FABRICS |
| ASTM D 6631 : 2005 : R2011 | Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
| ASTM D 6740 : 2015 : REDLINE | Standard Test Method for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition |
| ASTM D 7816 : 2012 | Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins |
| ASTM D 8019 : 2015 | Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets |
| ASTM E 1927 : 1998 : R2007 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM D 1316 : 2006 | Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer |
| ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM C 1512 : 2010 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| ASTM D 7937 : 2015 | Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water |
| ASTM D 4567 : 2003 : R2013 | Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
| ASTM E 2490:2009 | Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| ASTM C 1667 : 2015 : REDLINE | Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels |
| ASTM D 3103 : 2014 : REDLINE | Standard Test Method for Thermal Insulation Performance of Distribution Packages |
| ASTM D 6175 : 2003 | Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
| ASTM C 1125 : 1989 : R2015 | Standard Test Method for Penetration Index of Asbestos (Withdrawn 2021) |
| ASTM F 1514 : 2003 : R2013 | Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change |
| ASTM E 1926 : 2008 : R2015 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM F 1940 : 2007 : REV A : R2014 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM C 1111 : 2010 : R2015 | Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM E 2798 : 2011 | Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application |
| ASTM D 4699 : 2003 : R2013 | Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles |
| ASTM D 5153 : 2010 : R2016 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption |
| ASTM D 8089 : 2017 | Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
| ASTM A 977/A977M : 2007 | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| EN ISO 13500:2008/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| ISO 13503-3:2005 | Petroleum and natural gas industries Completion fluids and materials Part 3: Testing of heavy brines |
| ISO 13501:2011 | Petroleum and natural gas industries Drilling fluids Processing equipment evaluation |
| EN ISO 13501:2011 | Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011) |
| EN ISO 13503-3:2005/AC:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES |
| ASTM D 6913 : 2004 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7309 : 2013 : REDLINE | TEST METHOD FOR DETERMINING FLAMMABILITY CHARACTERISTICS OF PLASTICS AND OTHER SOLID MATERIALS USING MICROSCALE COMBUSTION CALORIMETRY |
| ASTM D 6242 : 1998 : R2004 | Standard Test Method for Mass Unit Area of Nonwoven Fabrics (Withdrawn 2008) |
| ASTM G 211 : 2014 | Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets |
| ASTM D 3039/D3039M : 2000 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM D 6575/D6575M : 2016 : REDLINE | Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
| ASTM C 1215 : 1992 : R2006 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
| ASTM E 1082 : 1990 : R2002 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| API 13C REDLINE : 2010 | RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION |
| ASTM E 2330 : 2012 : REDLINE | Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons |
| ASTM G 83 : 1996 | Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005) |
| ASTM D 5029 : 1998 : R2004 | Standard Test Method for Water Solubles in Activated Carbon |
| ASTM F 2824 : 2010 | Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids |
| ASTM E 456 : 2013 : REV A : EDT 2 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 7248/D7248M : 2012 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| ASTM E 2591 : 2007 | Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians |
| ASTM D 1749 : 1993 : R1997 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| ASTM D 4284 : 2012 | Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry |
| ASTM E 456 : 2013 : REV A : EDT 3 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 660 : 1990 : R1996 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| API 13A : 2010 : INC : ERR 4 : 2016 : R201500 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM E 2927 : 2017-04 | TEST METHOD FOR DETERMINATION OF TRACE ELEMENTS IN SODA-LIME GLASS SAMPLES USING LASER ABLATION INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY FOR FORENSIC COMPARISONS |
| ASTM D 1425/D1425M : 2014 : REDLINE | Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment |
| ASTM F 95 : 1989 : R2000 | Standard Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer (Withdrawn 2003) |
| ASTM E 1082 : 1990 : R2007 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 7472 : 2009 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| ASTM F 2797 : 2010 | Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners (Withdrawn 2019) |
| ASTM F 3299 : 2018 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf >5</inf> Sensor) |
| ASTM E 970 : 2017 : REDLINE | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM F 122 : 1974 : R1985 | Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990) |
| ASTM F 1249 : 2013 : REDLINE | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM C 187 : 2016 : REDLINE | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste |
| ASTM E 1940 : 2013 | Standard Guide for Dosimetry for Sterile Insect Release Programs |
| ASTM D 1603 : 2014 : REDLINE | Standard Test Method for Carbon Black Content in Olefin Plastics |
| ASTM D 5824 : 1998 : R2011 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM G 122 : 1996 : R2008 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
| ASTM D 7735 : 2017 : REDLINE | Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures |
| ASTM E 2649 : 2012 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy |
| ASTM C 459 : 1997 : R2002 : EDT 1 | Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM E 643 : 2015 : REDLINE | Standard Test Method for Ball Punch Deformation of Metallic Sheet Material |
| ASTM D 4179 : 2011 | Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers |
| ASTM D 5029 :1998 | Standard Test Method for Water Solubles in Activated Carbon |
| ASTM F 2845 : 2014 : REDLINE | Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs |
| ASTM B 527 : 2015 : REDLINE | Standard Test Method for Tap Density of Metal Powders and Compounds |
| ASTM E 3031 : 2015 | Standard Test Method for Determination of Antibacterial Activity on Ceramic Surfaces |
| ASTM C 958 : 1992 : R2007 | Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation |
| ASTM F 3300 : 2018 | Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus |
| ASTM D 2752/D2752M : 1988 : R2011 : EDT 1 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM C 749 : 2015 : REDLINE | Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ASTM D 6493 : 2011 | Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus |
| ASTM C 209 : 2015 : REDLINE | Standard Test Methods for Cellulosic Fiber Insulating Board |
| ASTM C 1174 : 2017 : REDLINE | Standard Practice for Evaluation of the Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste |
| ASTM E 1939 : 2005 | PRACTICE FOR BLOOD IRRADIATION DOSIMETRY |
| ASTM D 6242 : 1998 | Standard Test Method for Mass Unit Area of Nonwoven Fabrics |
| ASTM D 5758 : 2001 | Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| API 13A REDLINE : 2010 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM B 647 : 2010 : R2016 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM D 6843 : 2010 | Standard Test Method for Silanes Used in Rubber Formulations <br> (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) |
| ASTM D 3530/D3530M : 1997 : R2008 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ASTM D 4058 :1996 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
| ASTM D 7565/D7565M : 2010 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
| ASTM C 459/C459M : 1997 : R2011 : EDT 1 | Standard Test Methods for Asbestos-Cement Flat Products |
| ASTM D 6656 : 2016 : REDLINE | Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation) |
| ASTM B 703 : 2017 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
| ASTM C 1446 : 2011 : REDLINE | Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories |
| ASTM C 1785 : 2017 : REDLINE | Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing |
| ASTM D 4699 : 2003 | Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles |
| ASTM E 3064 : 2016 | Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose |
| ASTM D 2947 : 1988 : R2002 : EDT 1 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| B184 SERIES-17 | Polymeric subsurface stormwater management structures |
| ASTM E 2587 : 2016 : REDLINE | Standard Practice for Use of Control Charts in Statistical Process Control |
| ASTM F 2824 : 2010 : R2015 | Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids |
| ASTM D 8054/D8054M : 2016 | Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns |
| ASTM E 1772 : 1995 | Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique |
| ASTM E 855 : 2008 : R2013 | Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM D 3639/D3639M : 1992 : R2011 : EDT 1 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM C 469 : 2002 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3594 : 1993 : R2013 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019) |
| ASTM D 7681 : 2011 : R2016 | Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer |
| ASTM D 6566 : 2018 : REDLINE | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
| ASTM C 1606 : 2010 | Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware |
| API 13A : 2010 : INC : ERR 4 : 2016 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 4460 : 1997 : R2005 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
| ASTM E 2008 : 2017 : REDLINE | Standard Test Methods for Volatility Rate by Thermogravimetry |
| ASTM D 4513 : 2011 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
| ASTM D 4509 : 1996 | Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005) |
| ASTM D 5572 : 1995 : R2012 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM E 1970 : 2016 : REDLINE | Standard Practice for Statistical Treatment of Thermoanalytical Data |
| ASTM D 8132/D8132M : 2017 | Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
| API 13A : 2010 : INC : ERR 2 : 2015 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 6815 : 2009 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| API RP 13C : 2014 | RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| ASTM D 6790/D6790M : 2016 : REDLINE | Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
| ASTM G 143 : 2003 : R2013 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
| ASTM C 198 : 2009 : R2013 | Standard Test Method for Cold Bonding Strength of Refractory Mortar |
| ASTM D 5403 : 1993 : R2007 | Standard Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM D 5961/D5961M : 2017 : REDLINE | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
| ASTM D 6195 : 2003 | Standard Test Methods for Loop Tack |
| ASTM C 1124/C1124M : 1990 : R2015 | Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021) |
| AASHTO R 44 : 2007(R2018) | Standard Practice for Independent Assurance (IA) Programs |
| AASHTO TP 118 : 2015 | METHOD OF TEST FOR CHARACTERIZATION OF THE AIR-VOID SYSTEM OF FRESHLY MIXED CONCRETE BY THE SEQUENTIAL PRESSURE METHOD |
| ASTM E 2171 : 2002 : R2013 | Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record (Withdrawn 2017) |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ASTM E 2584 : 2014 : REDLINE | Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter |
| ASTM D 7785 : 2012 | Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration |
| ASTM D 3410/D3410M : 2016 : REDLINE | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| ASTM D 6248 : 1998 : R2012 : EDT 1 | Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021) |
| ASTM F 1863 : 2016 : REDLINE | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
| ASTM D 6175 : 2003 : R2019 | Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
| ASTM D 198 : 2015 : REDLINE | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 7514 : 2014 : REDLINE | Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
| ASTM E 2926 : 2017 : REDLINE | Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry |
| ASTM D 7591 : 2012 : R2017 | Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography |
| ASTM D 1214:2010 | Standard Test Method for Sieve Analysis of Glass Spheres |
| ASTM D 8133 : 2017 | Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry |
| ASTM C 1124 : 1990 : R1999 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM D 4222 : 2003 : R2008 | Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements |
| ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM E 3039 : 2016 | Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT Specimens |
| ASTM D 3670 : 1991 : R2014 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM E 2532 : 2009 : R2017 | Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices |
| ASTM C 1182 : 2009 : R2014 | Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
| ASTM F 2095 : 2007 : EDT 1 | Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| ASTM F 2544 : 2011 | Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units |
| ASTM C 651 : 2015 : REDLINE | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ASTM E 1414/E1414M : 2016 : REDLINE | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
| ASTM A 1013 : 2000 : R2013 : EDT 1 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method |
| ASTM D 6738 : 2015 : REDLINE | Standard Test Method for Precipitated Silica—Volatile Content |
| ASTM D 1934 : 1995 : R2012 | Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method |
| ASTM D 8161 : 2017 | Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight |
| ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM C 1162/C1162M : 1990 : R2015 | Standard Test Method for Loose Density of Asbestos (Withdrawn 2021) |
| ASTM D 2752 : 1988 : R2002 : EDT 1 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM D 6657 : 2016 : REDLINE | Standard Test Method for pH of Wet Blue and Wet White |
| ASTM E 2554 : 2013-05 | PRACTICE FOR ESTIMATING AND MONITORING THE UNCERTAINTY OF TEST RESULTS OF A TEST METHOD USING CONTROL CHART TECHNIQUES |
| ASTM E 1489 : 2008 : R2013 | Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM D 2854 : 2009 : R2014 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM E 1260 : 2003 : R2015 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| ASTM D 7881 : 2013 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode |
| ASTM D 6741 : 2010 : R2015 | Standard Test Methods for Silanes Used in Rubber Formulations <brk/>(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content |
| ASTM C 958 : 1992 : R2000 | Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation |
| ASTM D 6133 : 2002 : R2008 | Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 4782 : 2010 : R2016 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
| ASTM D 7812 : 2016 | Standard Test Method for Tensile Testing of Aramid Paper |
| ASTM G 132 : 1996 : R2018 | Standard Test Method for Pin Abrasion Testing |
| ASTM D 7584 : 2016 : REDLINE | Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber |
| ASTM D 4438 : 2013 | Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
| ASTM D 2589 : 1988 : R2006 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM F 1284 : 2009 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM D 6873 : 2003 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
| ASTM D 5758 : 2001 : R2011 : EDT 1 | Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
| ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| ASTM D 2589 : 1988 : R2002 : EDT 2 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 3639 : 1992 : R2006 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM C 1234 : 2011 | Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
| ASTM E 1540 : 2004 | PRACTICE FOR USE OF A RADIOCHROMIC LIQUID DOSIMETRY SYSTEM |
| ASTM D 7779 : 2011 : R2015 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
| ASTM D 7028 : 2007 : R2015 | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
| ASTM F 1514 : 2003 : R2008 | Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change |
| ASTM C 1124 : 1990 : R2004 : EDT 1 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM D 1214 : 2010 : R2015 : EDT 1 | Standard Test Method for Sieve Analysis of Glass Spheres |
| ASTM C 1124 : 1990 : R2004 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM E 834 : 2009 | Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger |
| ASTM F 1165 : 2015 : REDLINE | Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts |
| ASTM F 2055 : 2017 : REDLINE | Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method |
| ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 3530/D3530M : 1997 : R2003 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ISO 20505:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test |
| ASTM E 2823 : 2017 : REDLINE | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
| ASTM D 4463/D4463M : 1996 : R2012 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM C 549 : 2006 : R2012 | Standard Specification for Perlite Loose Fill Insulation |
| ASTM D 1043 : 2016 : REDLINE | Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
| ASTM D 4085 : 1993 : R2003 | Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM C 25 : 2017 : REDLINE | TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME |
| ASTM G 32 : 2016 : REDLINE | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM C 1292 : 2016 : REDLINE | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1119/C1119M : 1990 : R2015 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes (Withdrawn 2021) |
| ASTM E 2455 : 2006 : R2013 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022) |
| ASTM D 7817 : 2012 : R2016 | Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins |
| ASTM D 6844 : 2010 : R2015 | Standard Test Method for Silanes Used in Rubber Formulations <brk/>(bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC) |
| ASTM D 6415/D6415M : 2006 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM D 6415/D6415M : 2006 : REV A : R2013 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM C 1068 : 2015 : REDLINE | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
| ASTM D 5158 : 1998 : R2013 | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM E 839 : 2011 : R2016 : EDT 1 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
| ASTM E 660 : 1990 : R2011 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM F 1868 : 2017 : REDLINE | Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate |
| ASTM D 6493 : 2011 : R2015 | Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus |
| ASTM D 6900 : 2010 : R2015 | Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
| ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 4085 : 1993 : R2008 | Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM C 1382 : 2016 : REDLINE | Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
| ASTM D 6862:2011 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D 6647 : 2001 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM G 132 : 1996 : R2001 | Standard Test Method for Pin Abrasion Testing |
| ASTM C 1119 : 1990 : R2004 : EDT 1 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASME PTC51 : 2011 : R2016 | GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES |
| ASME PTC51 : 2011 | GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ASTM E 2587 : 2016 : REDLINE | Standard Practice for Use of Control Charts in Statistical Process Control |
£62.61
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.