ASTM E 1816 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
17-12-2022
English
30-08-2018
This practice provides guidelines for measuring the thickness of materials using Electromagnetic Acoustic Transducers (EMAT), a non-contact pulse-echo method, at temperatures not to exceed 1200°F [650°C].
1.1This practice provides guidelines for measuring the thickness of materials using Electromagnetic Acoustic Transducers (EMAT), a non-contact pulse-echo method, at temperatures not to exceed 1200°F [650°C].
1.2This practice is applicable to any electrically conductive or ferromagnetic material, or both, in which ultrasonic waves will propagate at a constant velocity throughout the part, and from which back reflections can be obtained and resolved.
1.3Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
E 07
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM E 213 : 2014 : EDT 1 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
ASTM E 1962 : 2014 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 213 : 2022 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 2017 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 1996 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 2012 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 1996 : R2007 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 1996 : R2002 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1774 : 2017 : R2022 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.