ASTM E 200 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
17-07-2023
English
27-07-2018
This practice covers procedures for the preparation, standardization, and storage of the standard volumetric solutions and reagent testing solutions commonly used in chemical analysis.
1.1This practice covers procedures for the preparation, standardization, and storage of the standard volumetric solutions and reagent testing solutions commonly used in chemical analysis.
1.2The information in this practice is arranged as follows:
| Sections | |
| Referenced Documents | 2 |
| Terminology | 3 |
| Significance and Use | 4 |
| Apparatus | 5 |
| Temperature effects | 6 |
| Measurements | 7 |
| Reagents | 8 |
| Concentration of solutions | 9 |
| Mixing of solutions | 10 |
| Storage of solutions | 11 |
| Preparation and standardization of solutions | 12 |
| Precision and Bias | 13 |
| Sodium hydroxide solution, 0.02 to 1.0 meq/mL (N) | 14 to 19 |
| Hydrochloric acid, 0.02 to 1.0 meq/mL (N) | 20 to 28 |
| Sulfuric acid, 0.02 to 1.0 meq/mL (N) | 29 to 33 |
| Hydrochloric acid, special 1 meq/mL (N) | 34 to 38 |
| Sulfuric acid, special 1 meq/mL (N) | 39 to 43 |
| Silver nitrate solution, 0.1 meq/mL (N) | 44 to 48 |
| Ammonium thiocyanate solution, 0.1 meq/mL (N) | 49 to 53 |
| Iodine solution, 0.1 meq/mL (N) | 54 to 58 |
| Sodium thiosulfate solution, 0.1 meq/mL (N) | 59 to 63 |
| Potassium permanganate solution, 0.1 meq/mL (N) | 64 to 68 |
| Potassium dichromate solution, 0.1 meq/mL(N) | 69 to 73 |
| Methanolic sodium hydroxide solution, 0.5 meq/mL (N) | 74 to 79 |
| Ceric sulfate solution, 0.1 meq/mL (N) | 80 to 84 |
| Acetous perchloric acid, 0.1 meq/mL (N) | 85 to 89 |
| Disodium ethylenediaminetetraacetate solution, 0.05 mol/L(M) | 90 to 94 |
| Standard ion solutions | 95 |
| Nonstandardized reagent solutions and indicator solutions | 96 |
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given throughout this practice.
| Committee |
D 16
|
| DocumentType |
Standard Practice
|
| Pages |
16
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 1613 : 2017 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM C 25 : 2019 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
| ASTM D 888 : 2018 | Standard Test Methods for Dissolved Oxygen in Water |
| ASTM E 534 : 2018 | Standard Test Methods for Chemical Analysis of Sodium Chloride |
| ASTM D 3228 : 2022 | Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
| ASTM E 1547 : 2009 : R2023 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 4274 : 2023 | Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
| ASTM D 6511/D6511M : 2018 | Standard Test Methods for Solvent Bearing Bituminous Compounds |
| ASTM E 3334 : 2022 | Standard Test Method for Acidity in Ethanol and Ethanol Solutions |
| ASTM D 4856 : 2011 : R2016 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
| ASTM D 513 : 2016 | Standard Test Methods for Total and Dissolved Carbon Dioxide in Water |
| ASTM D 1141 : 1998 : R2021 | Standard Practice for Preparation of Substitute Ocean Water |
| ASTM D 1386 : 2015 : R2022 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes |
| ASTM E 1910/E1910M : 2021 | Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity |
| ASTM E 1228 : 2023 | Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure |
| ASTM D 2379 : 2009 : R2017 | Standard Test Method for Acidity of Formaldehyde Solutions |
| ASTM E 1615 : 2022 | Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry |
| ASTM D 7389 : 2007 : R2019 | Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes |
| ASTM E 506 : 2017 : REV A | Standard Test Method for Mercury in Liquid Chlorine |
| ASTM E 298 : 2017 : REV A | Standard Test Methods for Assay of Organic Peroxides |
| ASTM D 1067 : 2016 | Standard Test Methods for Acidity or Alkalinity of Water |
| ASTM D 6328 : 2018 | Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition |
| ASTM D 6363 : 2020 | Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM D 6470 : 1999 : R2020 | Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
| ASTM E 224 : 2023 | Standard Test Methods for Analysis of Hydrochloric Acid |
| ASTM D 5810 : 1996 : R2021 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 4266 : 2017 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
| ASTM D 4252 : 1989 : R2017 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM D 1387 : 1989 : R2019 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes |
| ASTM D 3634 : 2021 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 7795 : 2015 : R2022 : EDT 1 | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
| ASTM D 1614 : 2009 : R2017 | Standard Test Method for Alkalinity in Acetone |
| ASTM D 5788 : 1995 : R2017 | Standard Guide for Spiking Organics into Aqueous Samples |
| ASTM D 3546 : 2005 : R2019 | Standard Test Method for Formic Acid in Glacial Acetic Acid |
| ASTM E 1584 : 2017 | Standard Test Method for Assay of Nitric Acid |
| ASTM E 778 : 2015 : R2021 | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
| ASTM D 3869 : 2015 : R2023 | Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines |
| ASTM D 2942 : 2002 : R2018 | Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods) |
| ASTM D 3875 : 2015 : R2023 | Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines |
| ASTM E 223 : 2023 : EDT 1 | Standard Test Methods for Analysis of Sulfuric Acid |
| ASTM D 2106 : 2007 : R2022 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
| ASTM D 3566 : 2003 : R2018 | Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion |
| ASTM D 5058 : 2012 : R2020 | Standard Practices for Compatibility of Screening Analysis of Waste |
| ASTM D 4809 : 2018 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
| ASTM E 649 : 2017 : REV A | Standard Test Method for Bromine in Chlorine |
| ASTM E 222 : 2023 | Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
| ASTM D 297 : 2021 | Standard Test Methods for Rubber Products—Chemical Analysis |
| ASTM D3249 - 95(2019) | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM E 2677 : 2020 | Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest |
| ASTM D 512 : 2023 | Standard Test Methods for Chloride Ion In Water |
| ASTM E 291 : 2018 | Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
| ASTM D 1417 : 2016 : R2021 | Standard Test Methods for Rubber Latices—Synthetic |
| ASTM D 3316 : 2006 : R2022 | Standard Test Method for Stability of Perchloroethylene with Copper |
| ASTM E 359 : 2017 | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM D 240 : 2019 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| ASTM D 2086 : 2022 | Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde |
| ASTM E 449 : 2018 | Standard Test Methods for Analysis of Calcium Chloride |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.