• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 230 : 2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

23-09-2003

CONTAINED IN VOL. 14.03, 2009 Gives reference tables for temperature electro-motive force relationships for various industrial thermocouples commonly used in industry.

1.1 This specification contains reference tables (Tables 8-23) that give temperature-electromotive force (emf) relationships for Types B, E, J, K, N, R, S, and T thermocouples. These are the thermocouple types most commonly used in industry.

1.2 Also included are lists of standard and special tolerances on initial values of emf versus temperature for thermocouples (Table 1), thermocouple extension wires (Table 2), and compensating extension wires for thermocouples (Table 3).

1.3 Tables 4-5, included herein, give data on insulation color coding for thermocouple and thermocouple extension wires as customarily used in the United States.

1.4 Recommendations regarding upper temperature limits for the thermocouple types referred to in 1.1 are given in Table 6.

1.5 Tables 24-43 give temperature-emf data for single-leg thermoelements referenced to platinum (NIST Pt 67). The tables include values for Types BP, BN, JP, JN, KP (same as EP), KN, NP, NN, TP, and TN (same as EN).

1.6 Tables for Types RP, RN, SP, and SN thermoelements are not included since, nominally, Tables 18-21 represent the thermoelectric properties of Type RP and SP thermoelements referenced to pure platinum.

1.7 Polynomial coefficients that may be used for computation of thermocouple emf as a function of temperature are given in Table 7. Coefficients for the emf of each thermocouple pair as well as for the emf of individual thermoelements versus platinum are included.

1.8 Coefficients for sets of inverse polynomials are given in Table 44. These may be used for computing a close approximation of temperature (oC) as a function of thermocouple emf. Inverse functions are provided only for thermocouple pairs and are valid only over the emf ranges specified.

1.9 This specification is intended to define the thermoelectric properties of materials that conform to the relationships presented in the tables of this standard and bear the letter designations contained herein. Topics such as ordering information, physical and mechanical properties, workmanship, testing, and marking are not addressed in this specification. The user is referred to specific standards such as Specifications E235, E574, E585, E608, E1159, or E1223, as appropriate, for guidance in these areas.

1.10 The temperature-emf data in this specification are intended for industrial and laboratory use.

Committee
E 20
DocumentType
Standard
Pages
189
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 8040 : 2017 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
ASTM D 7873 : 2013 : EDT 2 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ISO 13573:2012 Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
ASTM C 1033 : 1985 : R1994 : EDT 1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
13/30259829 DC : 0 BS ISO 17245 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY IMMERSING IN MOLTEN SALT OR OTHER LIQUIDS UNDER STATIC CONDITIONS
BS ISO 17248:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
ASTM D 6200 : 2001 : R2007 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
API MPM CH19.3A : 1997 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS
ASTM C 335 : 2005 : REV A Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM D 3711 : 1995 : R2005 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ISA 67.06.01 : 2002 PERFORMANCE MONITORING FOR NUCLEAR SAFETY-RELATED INSTRUMENT CHANNELS IN NUCLEAR POWER PLANTS
FM 3600 : 2018 ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
ASTM C 372 : 1994 : R2007 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM E 1159 : 2015 : REDLINE Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
ASTM D 7820 : 2012 Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
ASTM D 7646 : 2010 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM A 991/A991M : 2017 : REDLINE Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
ASTM E 235/E235M : 2012 : R2018 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM D 6200 : 2001 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C 1003 : 1983 : R1992 : EDT 1 Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box (Withdrawn 1997)
ASTM C 1033 : 1985 : R2000 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically (Withdrawn 2003)
ASTM D 5869 : 2007 : REV A Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM E 207 : 2008 : R2015 : EDT 1 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM C 210 : 1995 : R2014 Standard Test Method for Reheat Change of Insulating Firebrick
ASTM D 6891 : 2015 : REDLINE Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ASTM C 1465 : 2008 : R2013 : EDT 1 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM D 3711 : 1995 : R2009 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016)
ASTM D 3711 : 1995 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM C 835 : 2006 : R2013 : EDT 1 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
ASTM C 335 : 2005 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C 1774 : 2013 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
ASTM C 1465 : 2008 : R2013 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
MIL-DTL-25446 Revision F:2022 Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C)
ASTM E 585/E585M : 2012-06 SPECIFICATION FOR COMPACTED MINERAL-INSULATED, METAL-SHEATHED, BASE METAL THERMOCOUPLE CABLE
ASTM C 1211 : 2018 : REDLINE Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
ASTM C 210 : 1995 : R2007 : EDT 1 Standard Test Method for Reheat Change of Insulating Firebrick
ASTM C 210 : 1995 : R1999 Standard Test Method for Reheat Change of Insulating Firebrick
ASTM D 5869 : 2007 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
API MPMS CHAPTER 19.3 PART D : 2001(R2012) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART D - FUGITIVE EMISSIONS TEST METHOD OF DECK-SEAM LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
BS ISO 13573:2012 Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
ISO 17224:2015 Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
API MPM CH19.3D:2001 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART D - FUGITIVE EMISSIONS TEST METHOD OF DECK-SEAM LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
API MPM CH19.3C : 1998(R2018) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
ASTM E 644 : 2011 : REDLINE Standard Test Methods for Testing Industrial Resistance Thermometers
API MPM CH19.3C : 1998(R2012) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
ASTM C 1465 : 2008 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
CSA Z223.1 : 0 METHOD FOR THE DETERMINATION OF PARTICULATE MASS FLOWS IN ENCLOSED GAS STREAMS
ASTM E 839 : 2011 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
BS 874-1:1986 Methods for determining thermal insulating properties Introduction, definitions and principles of measurement
ASTM D 3711 : 1995 : R2000 : EDT 1 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM C 113 : 2014 : REDLINE Standard Test Method for Reheat Change of Refractory Brick
ASTM D 6482 : 2006 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM E 696 : 2007 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM C 335 : 2005 : REV A : EDT 1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM D 4681 : 1987 Specification For Lubricants For Two-Stroke-Cycle Gasoline Engines- (TSC-4) (Withdrawn 1995)
ASTM D 5958 : 1999 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
ASTM C 835 : 2006 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
AWS C3.6 : 1999 SPECIFICATION FOR FURNACE BRAZING
ASTM C 372 : 1994 : R2001 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM D 2879 : 2010-10 TEST METHOD FOR VAPOR PRESSURE-TEMPERATURE RELATIONSHIP AND INITIAL DECOMPOSITION TEMPERATURE OF LIQUIDS BY ISOTENISCOPE
ASTM E 207 : 2008 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E 2877 : 2012 Standard Guide for Standard Guide for Digital Contact Thermometers
ASTM D 5958 : 1999 : R2011 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
ASTM E 2536 : 2015 : REV A Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM C 372 : 1994 : R2012 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C 865 : 2017 : REDLINE Standard Practice for Firing Refractory Concrete Specimens
ASTM D 4857 : 2012 : REDLINE Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM E 696 : 2007 : R2013 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM E 1350 : 2013-08 GUIDE FOR TESTING SHEATHED THERMOCOUPLES, THERMOCOUPLES ASSEMBLIES, AND CONNECTING WIRES PRIOR TO, AND AFTER INSTALLATION OR SERVICE
ASTM E 2877 : 2012e1 GUIDE FOR DIGITAL CONTACT THERMOMETERS
ASTM D 7873 : 2013 : R2017 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM E 2730 : 2010 : R2015 : EDT 1 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
API MPM CH19.3A : 1997(R2012) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS
08/30183661 DC : DRAFT SEP 2008 BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS
13/30259880 DC : 0 BS ISO 17224 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY APPLICATION OF A DEPOSIT OF SALT, ASH OR OTHER SUBSTANCES
BS ISO 17224:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
API MPM CH19.3C : 1998 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
ASTM D 6200 : 2001 : R2012 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D 6549 : 2006 : R2011 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D 1384 : 2005 : R2012 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM E 2730 : 2010 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM D 4858 : 2013 : REDLINE Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
MIL-PRF-62430 Revision B:2010 HARNESS ASSEMBLY, THERMOCOUPLE
ASTM E 608/E608M : 2013 : REDLINE SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES
ASTM C 1337 : 2017 : REDLINE Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D 5958 : 1999 : R2005 : EDT 1 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
ASTM E 2714 : 2013 : REDLINE Standard Test Method for Creep-Fatigue Testing
ASTM D 7873 : 2013 : EDT 1 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)
SAE AS 39029 : 2017 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
ASTM D 6482 : 2006 : R2016 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM C 1363 : 2011 : REDLINE Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D 6549 : 2006 : R2015 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D 1384 : 2005 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 6482 : 2006 : R2011 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D 5207 : 2014 : REDLINE Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
ASTM E 235/E235M : 2012 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM D 4693 : 2007 : R2017 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
API 551 : 2016 PROCESS MEASUREMENT
ASHRAE 41.1 : 2013 STANDARD METHOD FOR TEMPERATURE MEASUREMENT
10/30231379 DC : 0 BS ISO 21608 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR ISOTHERMAL-EXPOSURE OXIDATION TESTING UNDER HIGH-TEMPERATURE CORROSION CONDITIONS FOR METALLIC MATERIALS
MIL-DTL-25446 Revision E:2012 Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C)
ASTM E 633 : 2013 : REDLINE Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
ASTM C 976 : 1990 : R1996 : EDT 1 Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (Withdrawn 2002)
AWS C3.7 : 1999 SPECIFICATION FOR ALUMINUM BRAZING
ASTM E 696 : 2007 : R2018 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
TR AMS2750 : 2009 AEROSPACE SERIES - AEROSPACE MATERIAL SPECIFICATION - PYROMETRY
ASTM E 601 : 2015 : REDLINE Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM C 335/C335M : 2017 : REDLINE Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C 372 : 1994 : R2001 : EDT 1 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM D 4693 : 2007 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM E 1232 : 2007 : R2013 Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM C 1291 : 2018 : REDLINE Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM D 7646 : 2010 : R2014 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM E 1232 : 2007 Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM D 1384 : 2005 : EDT 1 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 5869 : 2007 : REV A : R2013 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM E 608/E608M : 2013 : R2019 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
BS ISO 17245:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
ASTM E 220 : 2013 : REDLINE Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM C 372 : 1994 : R2016 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
SAE ARP 5144 : 2017 HEAT APPLICATION FOR THERMOSETTING RESIN CURING
ASTM C 372 : 1994 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
11/30210857 DC : 0 BS ISO 13573 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR THERMAL-CYCLING EXPOSURE TESTING UNDER HIGH-TEMPERATURE CORROSION CONDITIONS FOR METALLIC MATERIALS
13/30259830 DC : 0 BS ISO 17248 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY EMBEDDING IN SALT, ASH, OR OTHER SOLIDS
ASTM D 5958 : 1999 : R2012 : EDT 1 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
MIL-P-11570 Revision C:1984 PYROMETERS, INDICATING, THERMOCOUPLES
AWS C3.7M/C3.7 : 2011 SPECIFICATION FOR ALUMINUM BRAZING
ASTM F 526 : 2016 : REDLINE Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
SAE AMS 2750 : 2012 PYROMETRY
IES LM 82 : 2012 CHARACTERIZATION OF LED LIGHT ENGINES AND LED LAMPS FOR ELECTRICAL AND PHOTOMETRIC PROPERTIES AS A FUNCTION OF TEMPERATURE
ASTM D 6549 : 2006 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
API MPM CH19.3A : 1997 : R2007 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS
ASTM E 2584 : 2014 : REDLINE Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E 2181/E2181M : 2011 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
ASTM D 4693 : 2007 : R2012 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM C 210 : 1995 : R2005 Standard Test Method for Reheat Change of Insulating Firebrick
ASTM D 6200 : 2001 : R2017 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C 1834 : 2016 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
ASTM E 1225 : 2013 : REDLINE Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ISO 29473:2010 Fire tests — Uncertainty of measurements in fire tests
ASTM E 2730 : 2010 : R2015 : EDT 2 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ISO 17248:2015 Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
ISO 17245:2015 Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
ASTM E 1232 : 2007 : R2019 Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM D 4611 : 2016 : REDLINE Standard Test Method for Specific Heat of Rock and Soil
ASTM E 839 : 2011 : R2016 : EDT 1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM E 207 : 2008 : R2015 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D 7873 : 20131 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)
ASME PTC19.3 : 1974(R2004) PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT

IEC 60584-3:2007 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
ASTM E 1159 : 2015 : REDLINE Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

View more information
£126.89
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.