• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 2785 : 2014 : R2022

Current
Current

The latest, up-to-date edition.

Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-05-2022

1.1This test method evaluates a change in physical properties, chemical properties, or both, of firestop materials after a standardized environmental exposure. This test method does not evaluate the fire performance of the firestop materials.

1.2This test method establishes indicators that will aid in determining the use of the tested material in buildings.

1.3This test method evaluates the properties of component products used within a firestop system, and does not evaluate the properties of assembled firestop systems.

Note 1:This test method does not preclude the possibility of exposing complete firestop systems to one or more severe environmental exposures and then exposing the complete firestop system to a fire test.

1.4This test method is intended to be a screening method in the evaluation of the relative behavior of a specific material before and after a standardized set of severe exposure criteria. Individual tests are not intended to be the only determining factor in evaluating or selecting a firestop material because each test has limitations.

1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 06
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 3157 : 2020 Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems

ASTM E 473 : 2022 : REV D Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D 6754/D6754M : 2015 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 177 : 2019 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D 4637/D4637M : 2015 : R2021 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 6947/D6947M : 2016 : R2023 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D 6754/D6754M : 2023 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM E 814 : 2013 : REV A : R2017 Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM E 473 : 2022 : REV B Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 176 : 2021 : REV A : EDT 1 Standard Terminology of Fire Standards
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 6083/D6083M : 2021 Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing
ASTM E 814 : 2023 : REV A Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM E 176 : 2024 Standard Terminology of Fire Standards
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 473 : 2023 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D 3045 : 2018 Standard Practice for Heat Aging of Plastics Without Load
ASTM E 119 : 2022 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM E 473 : 2022 : REV C Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D 6947/D6947M : 2016 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D 2041/D2041M : 2011 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM G 155 : 2021 Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
ASTM E 814 : 2023 Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 177 : 2019 : EDT 1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM E 473 : 2023 : REV B Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 119 : 2020 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM E 473 : 2022 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2023 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D 6754/D6754M : 2015 : R2022 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 6083/D6083M : 2024 Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing
ASTM E 176 : 2021 : REV A Standard Terminology of Fire Standards
ASTM D 4637/D4637M : 2015 : R2021 : EDT 1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.