ASTM E 300 : 2003 : R2022
Current
Current
The latest, up-to-date edition.
Standard Practice for Sampling Industrial Chemicals
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
18-07-2022
1.1This practice covers procedures for sampling several classes of industrial chemicals. It also includes recommendations for determining the number and location of such samples, to ensure their being representative of the lot in accordance with accepted probability sampling principles.
1.2Although this practice describes specific procedures for sampling various liquids, solids, and slurries, in bulk or in packages, these recommendations only outline the principles to be observed. They should not take precedence over specific sampling instructions contained in other ASTM product or method standards.
1.3These procedures are covered as follows:
| Sections | |
| Statistical Considerations | 7 – 11 |
| Simple Liquids | 12 – 27 |
| Solids | 28 – 35 |
| Slurries | 36 – 41 |
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Sections 6, 19, 20, 30, 34 and 37.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 16
|
| DocumentType |
Standard Practice
|
| Pages |
24
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM D 1719 : 2011 : R2019 | Standard Specification for Isobutyl Alcohol<sup>,</sup> |
| ASTM D 2378 : 2022 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited |
| ASTM E 2313 : 2021 : REV A | Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
| ASTM D 3128 : 2007 : R2021 | Standard Specification for 2-Methoxyethanol |
| ASTM D 5159 : 2021 | Standard Guide for Dusting Attrition of Granular Activated Carbon |
| ASTM D 329 : 2007 : R2021 | Standard Specification for Acetone |
| ASTM D 6232 : 2021 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
| ASTM D 7515 : 2019 | Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method) |
| ASTM D 3803 : 1991 : R2014 | Standard Test Method for Nuclear-Grade Activated Carbon |
| ASTM D 3860 : 1998 : R2020 | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
| ASTM D 1153 : 2022 | Standard Specification for Methyl Isobutyl Ketone |
| ASTM D 7094 : 2017 : REV A | Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester |
| ASTM D 7618 : 2013 : R2021 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel |
| ASTM D 8235 : 2021 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 6646 : 2003 : R2014 | Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon |
| ASTM D 268 : 2022 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM E 2680 : 2016 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM E 1899 : 2016 | Standard Test Method for Hydroxyl Groups Using Reaction with <emph type="ital">p</emph >-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM D 7236 : 2016 : REV A : R2021 | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
| ASTM D 3143/D3143M : 2019 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
| ASTM D 801 : 2002 : R2017 | Standard Test Methods for Sampling and Testing Dipentene |
| ASTM D 8062 : 2022 | Standard Specification for Purified Terephthalic Acid (PTA) with Low <emph type="ital" >p</emph>-Toluic Acid |
| ASTM D 3437 : 2015 : R2022 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 2862 : 2016 | Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
| ASTM D 8063 : 2018 | Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
| ASTM D 4416 : 2009 : R2017 | Standard Specification for Acrylic Acid |
| ASTM D 5983 : 2021 | Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 8207 : 2018 | Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry (Withdrawn 2023) |
| ASTM D 3735 : 2022 | Standard Specification for VM&P Naphthas |
| ASTM D 365 : 2001 : R2017 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 4360 : 2011 : R2019 | Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone |
| ASTM D 5742 : 2016 | Standard Test Method for Determination of Butane Activity of Activated Carbon |
| ASTM D 3852 : 2020 | Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid |
| ASTM D 4806 : 2021 : REV A | Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 740 : 2011 : R2019 | Standard Specification for Methyl Ethyl Ketone<sup>,</sup> |
| ASTM D 1836 : 2007 : R2021 | Standard Specification for Commercial Hexanes |
| ASTM D 92 : 2018 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| ASTM D 4057 : 2022 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 5158 : 1998 : R2019 | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving |
| ASTM E 2469 : 2016 | Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
| ASTM D 3969 : 2001 : R2019 : EDT 1 | Standard Test Method for Zirconium in Paint Driers by EDTA Method |
| ASTM D 2917 : 2007 : R2021 | Standard Specification for Methyl Isoamyl Ketone |
| ASTM D 6851 : 2020 | Standard Test Method for Determination of Contact pH with Activated Carbon |
| ASTM D 5228 : 2016 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| ASTM D 608 : 2005 : R2019 | Standard Specification for Dibutyl Phthalate |
| ASTM D 8032 : 2020 | Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
| ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
| ASTM D 3970 : 2005 : R2017 | Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
| ASTM D 4615 : 2022 | Standard Specification for <emph type="ital">n</emph>-Butyl Acetate (All Grades) |
| ASTM D 5029 : 1998 : R2020 | Standard Test Method for Water Solubles in Activated Carbon |
| ASTM D 3438 : 2019 | Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride |
| ASTM D 235 : 2022 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| ASTM E 2409 : 2020 : REV A | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method) |
| ASTM D 8176 : 2018 | Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh) |
| ASTM D 2693 : 2022 | Standard Specification for Ethylene Glycol |
| ASTM D 93 : 2020 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| ASTM E 1177 : 2022 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3466 : 2006 : R2018 | Standard Test Method for Ignition Temperature of Granular Activated Carbon |
| ASTM E 1568 : 2021 | Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
| ASTM D 2613 : 2001 : R2017 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM D 7976 : 2014 : R2020 | Standard Specification for Purified Terephthalic Acid (PTA) |
| ASTM D 4607 : 2014 : R2021 | Standard Test Method for Determination of Iodine Number of Activated Carbon |
| ASTM D 3734 : 2005 : R2018 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 3130 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade) |
| ASTM D 5164 : 2005 : R2019 | Standard Specification for Propylene Glycol and Dipropylene Glycol |
| ASTM D 3828 : 2016 : REV A : R2021 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester |
| ASTM D 2854 : 2009 : R2019 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 1007 : 2011 : R2019 | Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup> |
| ASTM D 4367 : 2022 | Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography |
| ASTM D 4171 : 2021 | Standard Specification for Fuel System Icing Inhibitors |
| ASTM D 3131 : 2007 : R2021 | Standard Specification for Isopropyl Acetate (99 % Grade) |
| ASTM D 4359 : 1990 : R2019 | Standard Test Method for Determining Whether a Material Is a Liquid or a Solid |
| ASTM D 7640 : 2016 : R2021 | Standard Specification for Engine Coolant Grade Glycerin |
| ASTM D 331 : 2011 : R2019 | Standard Specification for 2-Ethoxyethanol<sup>,</sup> |
| ASTM D 8031 : 2016 | Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration |
| ASTM D 7090 : 2004 : R2018 | Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography |
| ASTM D 2694 : 2005 : R2019 | Standard Specification for Diethylene Glycol<sup>,</sup> |
| ASTM D 3838 : 2005 : R2017 | Standard Test Method for pH of Activated Carbon |
| ASTM D 3988 : 2005 : R2017 | Standard Test Method for Vanadium in Paint Driers by EDTA Method |
| ASTM D 6385 : 1999 : R2017 | Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing |
| ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
| ASTM D 7713 : 2018 | Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal) |
| ASTM D 1817 : 2005 : R2021 | Standard Test Method for Rubber Chemicals—Density |
| ASTM D 3989 : 2001 : R2019 : EDT 1 | Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM D 803 : 2015 : R2020 | Standard Test Methods for Testing Tall Oil |
| ASTM D 1969 : 2022 | Standard Specification for 2-Ethylhexanol |
| ASTM D 7862 : 2021 | Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 770 : 2011 : R2019 | Standard Specification for Isopropyl Alcohol<sup>,</sup> |
| ASTM D 6647 : 2018 | Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption |
| ASTM E 3050 : 2021 | Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel |
| ASTM D 3622 : 2011 : R2019 | Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol) |
| ASTM E 3237 : 2019 | Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications |
| ASTM G 31 : 2021 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| ASTM D 5680 : 2014 : R2022 | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM D 3548 : 2009 : R2017 | Standard Specification for Ethyl Acrylate |
| ASTM D 330 : 2007 : R2021 | Standard Specification for 2-Butoxyethanol |
| ASTM D 4069 : 1995 : R2020 | Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
| ASTM D 304 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol) |
| ASTM D 5160 : 1995(R2019) | Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon |
| ASTM D 4614 : 2011 : R2019 | Standard Specification for Ethyl Acetate (All Grades) |
| ASTM D 6450 : 2016 : REV A : R2021 | Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester |
| ASTM D 5137 : 2007 : R2021 | Standard Specification for Hexyl Acetate |
| ASTM D 6229 : 2006 : R2018 | Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography |
| ASTM E 411 : 2017 : REV A | Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
| ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM G 188 : 2005 : R2021 | Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys |
| ASTM D 2190 : 2007 : R2021 | Standard Specification for Vinyl Acetate |
| ASTM E 1146 : 2016 | Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid) |
| ASTM E 1584 : 2017 | Standard Test Method for Assay of Nitric Acid |
| ASTM D 3804 : 2002 : R2021 | Standard Test Method for Iron in Paint Driers by EDTA Method |
| ASTM E 359 : 2017 | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM D 3467 : 2004 : R2020 | Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon |
| ASTM D 3620 : 2004 : R2017 | Standard Specification for Glacial Acetic Acid |
| ASTM D 4701 : 2000 : R2020 | Standard Specification for Technical Grade Methylene Chloride |
| ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
| ASTM D 7388 : 2018 | Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO) |
| ASTM D 2634 : 2007 : R2021 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
| ASTM D 802 : 2002 : R2017 | Standard Test Methods for Sampling and Testing Pine Oils |
| ASTM D 3802 : 2016 | Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| ASTM D 4075 : 2006 : R2021 | Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals |
£75.13
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.