• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 3193 : 2021

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
Available format(s)

Hardcopy , PDF

Superseded date

24-11-2023

Language(s)

English

Published date

30-09-2021

1.1This test method covers the determination of lead (Pb) in dust by wipe, paint, and soil collected in and around buildings and related structures by flame atomic absorption spectrophotometry (FAAS) and is derived from Test Methods D4185 and E1613. For determination of lead (Pb) and other metals in air by FAAS, see Test Method D4185.

1.2The sensitivity, detection limit, and optimum working concentration for lead (Pb) are given in Table 1.

1.3The values stated in SI units are to be regarded as standard. No other values of measurement are included in this standard.

1.3.1Exception—The SI and inch-pound units shown for wipe sampling data are to be individually regarded as standard for wipe sampling data (14.4.1).

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 22
DocumentType
Test Method
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7659 : 2021 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM D 7439 : 2021 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM E 1792 : 2020 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 8344 : 2020 Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
ASTM E 1727 : 2020 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM E 1775 : 2020 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 1729 : 2020 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E 2115 : 2019 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 2119 : 2020 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices

ASTM E 1605 : 2022 Standard Terminology Relating to Lead in Buildings
ASTM E 2115 : 2022 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1644 : 2021 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 2271/E2271M : 2018 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
ASTM E 2914/E2914M : 2021 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
ASTM D 6785 : 2020 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1645 : 2020 : REV A Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 2914/E2914M : 2019 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
ASTM E 1726 : 2021 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
ASTM D 4185 : 2017 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E 2913/E2913M : 2021 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM D 7035 : 2021 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1726 : 2020 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2021 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 4185 : 2023 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2115 : 2019 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 2913/E2913M : 2019 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
ASTM E 1583 : 2017 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1979 : 2021 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1188 : 2023 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1583 : 2021 : REV A Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM E 1188 : 2011 : R2017 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E 1583 : 2021 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM E 2271/E2271M : 2022 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.