ASTM E 354 : 1993 : R2000 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-11-2014
English
01-01-2000
1.1 These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:
| Element | Concentration Range, % | ||
| Aluminum | 0.005 | to | 18.00 |
| Beryllium | 0.001 | to | 0.05 |
| Boron | 0.001 | to | 1.00 |
| Calcium | 0.002 | to | 0.05 |
| Carbon | 0.001 | to | 1.10 |
| Chromium | 0.10 | to | 33.00 |
| Cobalt | 0.10 | to | 75.00 |
| Columbium (Niobium) | 0.01 | to | 6.0 |
| Copper | 0.01 | to | 10.00 |
| Iron | 0.01 | to | 85.00 |
| Magnesium | 0.001 | to | 0.05 |
| Manganese | 0.01 | to | 3.0 |
| Molybdenum | 0.01 | to | 30.0 |
| Nickel | 0.10 | to | 84.0 |
| Nitrogen | 0.001 | to | 0.20 |
| Phosphorus | 0.002 | to | 0.08 |
| Silicon | 0.01 | to | 5.00 |
| Sulfur | 0.002 | to | 0.10 |
| Tantalum | 0.005 | to | 10.0 |
| Titanium | 0.01 | to | 5.00 |
| Tungsten | 0.01 | to | 18.00 |
| Vanadium | 0.01 | to | 3.25 |
| Zirconium | 0.01 | to | 2.50 |
1.2 The test methods in this standard are contained in the sections indicated below:
| Sections | |
| Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 to7.00 %) | 100 |
| Carbon,Total, by the Combustion-Thermal Conductivity Method | 1a |
| Carbon, Total, by the Combustion Gravimetric Method (0.05 to1.10 %) | 79 |
| Chromium by the Atomic Absorption Method (0.006 to 1.00 %) | 165 |
| Chromium by the Peroxydisulfate Oxidation-Titration Method(0.10 to 33.00 %) | 175 |
| Chromium by the Peroxydisulfate-Oxidation Titrimetric Method | 1b |
| Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to75 %) | 53 |
| Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to 5.0 %) | 61 |
| Copper by Neocuproine Photometric Method (0.01 to 10.00 %) | 90 |
| Copper by the Sulfide Precipitation-Electrodeposition GravimetricMethod (0.01 to 10.00 %) | 71 |
| Iron by the Silver ReductionTitrimetric Method (1.0 to 50.0 %) | 192 |
| Manganese by the Periodate Photometric Method (0.05 to 2.00 %) | |
| Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravi-metric Method (1.5 to 30 %) | 184 |
| Molybdenum by the Photometric Method (0.01 to 1.50 %) | 153 |
| Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to84.0 %) | 135 |
| Phosphorus by the Molybdenum Blue Photometric Method (0.002to 0.08 %) | 18 |
| Silicon by the Gravimetric Method (0.05 to 5.00 %) | 46 |
| Sulfur by the Gravimetric Method | 1 c |
| Sulfur by the Combustion-Iodate Titration Method (0.005 to0.1 %) | 37 |
| Sulfur by the Chromatographic Gravimetric Method | 1b |
| Tin by the Solvent Extraction-Atomic Absorption Method (0.002to 0.10 %) | 143 |
1.3 Methods for the determination of several elements not included in this standard can be found in Test Methods E30 and Test Methods E1019.
1.4 Some of the concentration ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.
1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E380 are also used.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 5 and in special "Warning" paragraphs throughout these test methods.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.