We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM E 456 : 2013 : REV A : R2017 : EDT 5

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Standard Terminology Relating to Quality and Statistics

    Available format(s):  Hardcopy, PDF

    Superseded date:  28-01-2022

    Language(s):  English

    Published date:  12-05-2021

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This standard is the general terminology standard for terms defined in the standards of Committee E11 on Quality and Statistics.

    1.2A term in this standard which lists an attribution to an E11 technical standard indicates that the standard is normative for that term. Any changes in the term definition in the normative standard will be editorially changed in this standard. Any terms added to an E11 standard will be editorially added to this standard with an attribution to that standard.

    1.3Term definitions that are similar to ISO 3534 will be noted in this standard, but ISO 3534 will not be considered normative for any E11 terms.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee E 11
    Document Type Reference Material
    Product Note ε5NOTE—Terms were corrected editorially in May 2021.
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 266 : 2017 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 4463/D4463M : 2019 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
    ASTM D 5124 : 1996 : R2018 Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
    ASTM D 4567 : 2019 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
    ASTM D 3576 : 2020 Standard Test Method for Cell Size of Rigid Cellular Plastics
    ASTM F 2232 : 2014 : R2020 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
    ASTM C 917/C917M : 2018 Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
    ASTM D 2885 : 2020 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
    ASTM E 3143 : 2018 : REV B Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
    ASTM D 4284 : 2012 : R2017 : EDT 1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
    ASTM D 6290 : 2019 Standard Test Method for Color Determination of Plastic Pellets
    ASTM D 5681 : 2020 Standard Terminology for Waste and Waste Management
    ASTM D 3518/D3518M : 2018 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
    ASTM D 6300 : 2020 : REV B Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 2234/D2234M : 2020 Standard Practice for Collection of a Gross Sample of Coal
    ASTM D 2700 : 2019 : EDT 1 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6342 : 2012 : R2017 : EDT 1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
    ASTM D 7846 : 2016 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
    ASTM D 8321 : 2020 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
    ASTM E 2120 : 2010 : R2016 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
    ASTM D 1977 : 2016 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
    ASTM D 6671/D6671M : 2019 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
    ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM E 1617 : 2009 : R2019 Standard Practice for Reporting Particle Size Characterization Data
    ASTM C 1683 : 2010 : R2019 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM D 5154/D5154M : 2018 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
    ASTM F 1061 : 2008 : R2020 Standard Specification for Ski Binding Test Devices
    ASTM D 4662 : 2020 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
    ASTM D 6299 : 2020 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
    ASTM D 7337/D7337M : 2012 : R2019 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
    ASTM E 131 : 2010 : R2015 Standard Terminology Relating to Molecular Spectroscopy
    ASTM D 6792 : 2020 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
    ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
    ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
    ASTM D 4659 : 2019 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
    ASTM E 2108 : 2016 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
    ASTM E 2164 : 2016 Standard Test Method for Directional Difference Test
    ASTM D 4481 : 2010 : R2015 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
    ASTM E 3159 : 2018 Standard Guide for General Reliability
    ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
    ASTM D 5153 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
    ASTM D 4218 : 2020 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique
    ASTM D 5420 : 2021 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
    ASTM D 7136/D7136M : 2020 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
    ASTM D 6609 : 2017 Standard Guide for Part-Stream Sampling of Coal
    ASTM E 2762 : 2010 : R2020 Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
    ASTM E 1169 : 2020 Standard Practice for Conducting Ruggedness Tests
    ASTM D 4780 : 2012 : R2017 : EDT 1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
    ASTM D 8067/D8067M : 2017 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
    ASTM D 2126 : 2020 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
    ASTM B 855 : 2017 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
    ASTM D 4226 : 2019 : EDT 1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
    ASTM D 6122 : 2020 : REV A Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
    ASTM D 3663 : 2020 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
    ASTM E 2139 : 2005 : R2018 Standard Test Method for Same-Different Test
    ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
    ASTM E 1458 : 2012 : R2016 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
    ASTM D 7615/D7615M : 2019 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
    ASTM D 5758 : 2001 : R2015 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
    ASTM D 1622 : 2020 Standard Test Method for Apparent Density of Rigid Cellular Plastics
    ASTM E 2262 : 2003 : R2020 Standard Practice for Estimating Thurstonian Discriminal Distances
    ASTM E 177 : 2020 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
    ASTM D 2843 : 2019 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
    ASTM D 5132 : 2020 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
    ASTM D 6761 : 2017 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
    ASTM D3764:2019 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
    ASTM D 4255/D4255M : 2020 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
    ASTM E 526 : 2017 : EDT 1 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
    ASTM C 1474 : 2019 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
    ASTM D 8145 : 2018 Standard Practice for Sampling of Green Petroleum Coke
    ASTM E 2819 : 2011 : R2015 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
    ASTM E 2555 : 2007 : R2018 : EDT 1 Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
    ASTM E 3023 : 2021 Standard Practice for Probability of Detection Analysis for â Versus a Data
    ASTM D 8314 : 2020 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
    ASTM E 2554 : 2018 : EDT 1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
    ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
    ASTM D 4663 : 2020 Flameproof restrained plugs
    ASTM D 7617/D7617M : 2011 : R2017 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
    ASTM D 5523 : 2021 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
    ASTM C 365/C365M : 2016 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
    ASTM D 6621 : 2000 : R2017 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
    ASTM C 613 : 2019 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
    ASTM D 6576 : 2020 Standard Specification for Flexible Cellular Rubber Chemically Blown
    ASTM D 7336/D7336M : 2016 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
    ASTM E 2696 : 2009 : R2018 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
    ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM D 3769 : 2020 Standard Test Method for Microcellular Urethanes—High-Temperature Sag
    ASTM D 7078/D7078M : 2020 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
    ASTM D 6790/D6790M : 2016 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
    ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
    ASTM D 3030 : 2017 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
    ASTM D 1603 : 2020 Standard Test Method for Carbon Black Content in Olefin Plastics
    ASTM B 331 : 2020 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
    ASTM E 2334 : 2009 : R2018 Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample
    ASTM D 2396 : 2020 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
    ASTM E 141 : 2010 : R2018 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
    ASTM D 1056 : 2020 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
    ASTM D 4058 : 1996 : R2020 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
    ASTM D 7958/D7958M : 2017 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
    ASTM D 8066/D8066M : 2017 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
    ASTM B 330 : 2020 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
    ASTM D 6631 : 2005 : R2019 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
    ASTM D 6873/D6873M : 2019 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
    ASTM E 1260 : 2003 : R2020 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
    ASTM C 480/C480M : 2016 Standard Test Method for Flexure Creep of Sandwich Constructions
    ASTM B 311 : 2017 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
    ASTM E 1827 : 2011 : R2017 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
    ASTM E 1323 : 2015 : R2020 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
    ASTM D 3908 : 2020 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
    ASTM D 2047 : 2017 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
    ASTM C 1271 : 1999 : R2020 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
    ASTM F 2150 : 2019 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
    ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
    ASTM E 631 : 2015 Standard Terminology of Building Constructions
    ASTM D 7778 : 2015 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 2919 : 2014 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
    ASTM E 2282 : 2014 : R2019 Standard Guide for Defining the Test Result of a Test Method
    ASTM C 363/C363M : 2016 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
    ASTM C 518 : 2017 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
    ASTM E 1656/E1656M : 2011 : R2016 Standard Guide for Classification of Automated Pavement Condition Survey Equipment
    ASTM E 535 : 2019 Standard Practice for Preparation of Fire-Test-Response Standards
    ASTM D 5357 : 2019 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
    ASTM F 2554 : 2018 Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems
    ASTM D 6641/D6641M : 2016 : EDT 2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
    ASTM D 4968 : 2019 : REV A Standard Practice for Annual Review of Test Methods and Specifications for Plastics
    ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
    ASTM D 7264/D7264M : 2021 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
    ASTM D 7290 : 2006 : R2017 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
    ASTM F 1062 : 1997 : R2018 Standard Test Method for Verification of Ski Binding Test Devices
    ASTM C 1067 : 2020 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
    ASTM E 2363 : 2014 Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
    ASTM C 802 : 2014 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
    ASTM F 3107 : 2014 Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
    ASTM D 2013/D2013M : 2020 Standard Practice for Preparing Coal Samples for Analysis
    ASTM C 393/C393M : 2020 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
    ASTM D 4889 : 2021 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
    ASTM D 4222 : 2020 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
    ASTM E 1367 : 2003 : R2014 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
    ASTM D 6109 : 2019 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
    ASTM D 5757 : 2011 : R2017 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
    ASTM D 3906 : 2019 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
    ASTM D 7705/D7705M : 2012 : R2019 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
    ASTM D 5448/D5448M : 2016 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
    ASTM D 3907/D3907M : 2019 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
    ASTM D 1044 : 2019 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
    ASTM B 703 : 2017 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
    ASTM D 2699 : 2019 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 8131/D8131M : 2017 : EDT 1 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
    ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 3675 : 2021 : REV A Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
    ASTM D 635 : 2018 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
    ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
    ASTM D 3801 : 2020 : REV A Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
    ASTM B 761 : 2017 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
    ASTM D 1238 : 2020 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
    ASTM D 7565/D7565M : 2010 : R2017 Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
    ASTM E 2283 : 2008 : R2019 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
    ASTM D 3856 : 2011 : R2015 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
    ASTM D 4804 : 2020 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
    ASTM D 4164 : 2013 : R2018 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
    ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM C 1648 : 2012 : R2018 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
    ASTM E 2263 : 2012 : R2018 Standard Test Method for Paired Preference Test
    ASTM E 2544 : 2011 : REV A : R2019 Standard Terminology for Three-Dimensional (3D) Imaging Systems
    ASTM D 7913/D7913M : 2014 : R2020 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
    ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
    ASTM E 2943 : 2015 : R2021 Standard Guide for Two-Sample Acceptance and Preference Testing With Consumers
    ASTM E 2935 : 2020 : EDT 1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
    ASTM D 4513 : 2011 : R2017 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
    ASTM E 3193 : 2020 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
    ASTM F 1645/F1645M : 2016 Standard Test Method for Water Migration in Honeycomb Core Materials
    ASTM D 4179 : 2011 : R2017 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
    ASTM E 1345 : 1998 : R2019 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
    ASTM D 4464 : 2015 : R2020 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
    ASTM D 7332/D7332M : 2016 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
    ASTM D 7616/D7616M : 2011 : R2017 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
    ASTM D 7084 : 2018 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
    ASTM E 1325 : 2016 Standard Terminology Relating to Design of Experiments
    ASTM D 1790 : 2021 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
    ASTM D 5117 : 2017 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
    ASTM C 394/C394M : 2016 Standard Test Method for Shear Fatigue of Sandwich Core Materials
    ASTM D 6415/D6415M : 2006 : REV A : R2013 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
    ASTM D 5155 : 2019 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
    ASTM D 6772/D6772M : 2016 Standard Test Method for Dimensional Stability of Sandwich Core Materials
    ASTM F 3263 : 2017 Standard Guide for Packaging Test Method Validation
    ASTM F 1789 : 2017 : REV A Standard Terminology for F16 Mechanical Fasteners
    ASTM E 3009 : 2015 : EDT 1 Standard Test Method for Sensory Analysis—Tetrad Test
    ASTM E 2655 : 2014 : R2020 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
    ASTM C 721 : 2020 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
    ASTM B 963 : 2017 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
    ASTM D 7205/D7205M : 2006 : R2016 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
    ASTM E 105 : 2016 Standard Practice for Probability Sampling of Materials
    ASTM D 7310 : 2020 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
    ASTM E 1488 : 2012 : R2018 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
    ASTM E 2281 : 2015 : R2020 Standard Practice for Process Capability and Performance Measurement
    ASTM E 178 : 2016 : REV A Standard Practice for Dealing With Outlying Observations
    ASTM B 939 : 2021 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
    ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
    ASTM E 1970 : 2016 Standard Practice for Statistical Treatment of Thermoanalytical Data
    ASTM D 6175 : 2003 : R2019 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
    ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
    ASTM E 1655 : 2017 Standard Practices for Infrared Multivariate Quantitative Analysis
    ASTM E 1994 : 2009 : R2018 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
    ASTM C 1427 : 2021 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
    ASTM E 2587 : 2016 Standard Practice for Use of Control Charts in Statistical Process Control
    ASTM E 2798 : 2019 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
    ASTM D 7250/D7250M : 2020 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
    ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
    ASTM E 2834 : 2012 : R2018 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
    ASTM D 4365 : 2019 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
    ASTM D 6226 : 2021 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
    ASTM E 2586 : 2019 : EDT 1 Standard Practice for Calculating and Using Basic Statistics
    ASTM D 4782 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
    ASTM E 1847 : 1996 : R2013 Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022)
    ASTM E 766 : 2014(R2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
    ASTM D 909 : 2018 : EDT 1 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
    ASTM D 4812 : 2019 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
    ASTM C 273/C273M : 2020 Standard Test Method for Shear Properties of Sandwich Core Materials
    ASTM E 1732 : 2019 : EDT 1 Standard Terminology Relating to Forensic Science
    ASTM D 7309 : 2021 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
    ASTM C 670 : 2015 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
    ASTM C 1285 : 2021 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
    ASTM D 4642 : 2004 : R2016 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
    ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM D 2863 : 2019 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 5517 : 2014 Standard Test Method for Determining Extractability of Metals from Art Materials
    ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
    ASTM D 6259 : 2015 : R2019 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
    ASTM D 3552 : 2017 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
    ASTM D 792 : 2020 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    ASTM C 1673 : 2010 : REV A : R2018 Standard Terminology of C26.10 Nondestructive Assay Methods
    ASTM D 6341 : 2021 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
    ASTM E 2234 : 2009 : R2018 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
    ASTM E 3000 : 2018 Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel
    ASTM D 6883 : 2017 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
    ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
    ASTM D 7372 : 2017 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
    ASTM D 4512 : 2003 : R2018 : EDT 1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
    ASTM D 1004 : 2021 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 6264/D6264M : 2017 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
    ASTM E 1402 : 2013 : R2018 Standard Guide for Sampling Design
    ASTM C 1671 : 2020 : REV A Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
    ASTM D 7956/D7956M : 2016 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
    ASTM D 1203 : 2020 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
    ASTM E 122 : 2017 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
    ASTM D 4877 : 2019 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
    ASTM E 2610 : 2018 Standard Test Method for Sensory Analysis—Duo-Trio Test
    ASTM D 5048 : 2020 : REV A Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
    ASTM C 271/C271M : 2016 Standard Test Method for Density of Sandwich Core Materials
    ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
    ASTM D 7249/D7249M : 2020 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
    ASTM E 2910 : 2012 : R2018 Standard Guide for Preferred Methods for Acceptance of Product
    ASTM E 3080 : 2019 Standard Practice for Regression Analysis with a Single Predictor Variable
    ASTM F 3211 : 2017 Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices
    ASTM E 1885 : 2018 Standard Test Method for Sensory Analysis—Triangle Test
    ASTM D 7390 : 2018 : EDT 1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
    ASTM D 7027 : 2020 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
    ASTM D 3012 : 2019 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
    ASTM D 4699 : 2003 : R2018 : EDT 1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
    ASTM E 284 : 2017 Standard Terminology of Appearance
    ASTM F 1773 : 2009 : R2015 Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices
    ASTM D 5492 : 2017 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
    ASTM E 2709 : 2019 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
    ASTM E 1706 : 2020 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
    ASTM D 3575 : 2020 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
    ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 2862 : 2018 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
    ASTM E 2653 : 2015 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
    ASTM C 366/C366M : 2016 Standard Test Methods for Measurement of Thickness of Sandwich Cores
    ASTM E 2782 : 2017 Standard Guide for Measurement Systems Analysis (MSA)
    ASTM D 8336 : 2021 Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
    ASTM D 8004 : 2015 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
    ASTM D 1871 : 2004 : R2014 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
    ASTM D 7766/D7766M : 2016 Standard Practice for Damage Resistance Testing of Sandwich Constructions
    ASTM C 534/C534M : 2020 : REV A Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
    ASTM E 2489 : 2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
    ASTM D 3014 : 2019 : REV A Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
    ASTM D 5379/D5379M : 2019 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
    ASTM C 1255 : 2018 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 7137/D7137M : 2017 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
    ASTM D 5280 : 1996 : R2013 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
    ASTM D 4180 : 2013 : R2018 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
    ASTM D 6026 : 2013 Standard Practice for Using Significant Digits in Geotechnical Data
    ASTM D 4781 : 2003 : R2018 : EDT 1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
    ASTM D 8132/D8132M : 2017 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
    ASTM D 6108 : 2019 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
    ASTM E 2677 : 2020 Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
    ASTM D 6742/D6742M : 2017 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
    ASTM D 6856/D6856M : 2003 : R2016 Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
    ASTM D 4986 : 2020 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
    ASTM D 5766/D5766M : 2011 : R2018 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
    ASTM E 2475 : 2010 : R2016 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
    ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
    ASTM D 2842 : 2019 Standard Test Method for Water Absorption of Rigid Cellular Plastics
    ASTM E 1707 : 2015 GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING
    ASTM D 7914/D7914M : 2021 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
    ASTM E 1297 : 2018 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
    ASTM D 1929 : 2020 Standard Test Method for Determining Ignition Temperature of Plastics
    ASTM D 2699 : 2021 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 5758 : 2001 : R2021 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
    ASTM D 2700 : 2021 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4475 : 2021 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
    ASTM D 6621 : 2021 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
    ASTM D 7205/D7205M : 2021 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
    ASTM E 2489 : 2021 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
    ASTM B 212 : 2021 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
    ASTM D 7133 : 2021 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
    ASTM D 4481 : 2021 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
    ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 8321 : 2021 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
    ASTM D 6792 : 2021 : REV C Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
    ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 6122 : 2021 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
    ASTM D 955 : 2021 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
    ASTM B 873 : 2021 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
    ASTM E 3193 : 2021 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
    ASTM D 4329 : 2021 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
    ASTM D 7372 : 2021 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
    ASTM D 5227 : 2021 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
    ASTM D 4671 : 2021 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
    ASTM D 8393 : 2021 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
    ASTM D 7310 : 2021 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
    ASTM D 4274 : 2021 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
    ASTM D 6299 : 2021 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
    ASTM D 6026 : 2021 Standard Practice for Using Significant Digits and Data Records in Geotechnical Data
    ASTM D 5419 : 2021 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
    ASTM D 2885 : 2021 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
    ASTM D 7309 : 2021 : REV B Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
    ASTM C 1239 : 2013 : R2018 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM B 761 : 2017 : R2021 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
    ASTM F 1789 : 2017 : REV A : EDT 1 Standard Terminology for F16 Mechanical Fasteners
    ASTM D 1822 : 2021 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics
    ASTM D 5280 : 1996 : R2021 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
    ASTM D 1203 : 2021 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
    ASTM D 3420 : 2021 Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM D 7248/D7248M : 2021 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
    ASTM D 3354 : 2021 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
    ASTM E 1970 : 2016 : R2021 Standard Practice for Statistical Treatment of Thermoanalytical Data
    ASTM D 909 : 2021 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
    ASTM D 8387/D8387M : 2021 Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
    ASTM D 8337/D8337M : 2021 Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
    ASTM D 5507 : 2021 : REV A Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
    ASTM D 2013/D2013M : 2021 Standard Practice for Preparing Coal Samples for Analysis
    ASTM D 8428 : 2021 Standard Guide for Establishing Analyst Competence to Perform a Test Method
    ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM C 518 : 2021 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 2696 : 2009 : R2018 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
    ASTM E 2819 : 2011 : R2015 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
    ASTM E 2587 : 2016 Standard Practice for Use of Control Charts in Statistical Process Control
    ASTM E 1325 : 2016 Standard Terminology Relating to Design of Experiments
    ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 178 : 2016 : REV A Standard Practice for Dealing With Outlying Observations
    ASTM E 1169 : 2021 Standard Practice for Conducting Ruggedness Tests
    ASTM E 2819 : 2011 : R2021 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
    ASTM E 105 : 2021 Standard Guide for Probability Sampling of Materials
    ASTM E 178 : 2021 Standard Practice for Dealing With Outlying Observations
    ASTM E 2489 : 2021 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
    ASTM E 2696 : 2021 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
    ASTM E 1325 : 2021 Standard Terminology Relating to Design of Experiments
    ASTM E 2587 : 2016 : R2021 : EDT 1 Standard Practice for Use of Control Charts in Statistical Process Control
    ASTM E 2935 : 2020 : EDT 1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
    ASTM E 2555 : 2021 Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
    ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 105 : 2016 Standard Practice for Probability Sampling of Materials
    ASTM E 2935 : 2021 Standard Practice for Evaluating Equivalence of Two Testing Processes
    ASTM E 1169 : 2020 Standard Practice for Conducting Ruggedness Tests
    ASTM E 3159 : 2021 Standard Guide for General Reliability
    ASTM E 3159 : 2018 Standard Guide for General Reliability
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective