ASTM E 543 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Agencies Performing Nondestructive Testing
Available format(s)
PDF
Superseded date
20-08-2021
Language(s)
English
Published date
05-03-2015
CONTAINED IN VOL. 03.03, 2017 Provides minimum requirements for agencies performing non-destructive testing (NDT).
1.1This specification covers minimum requirements for agencies performing nondestructive testing (NDT).
1.2When using this specification to assess the capability of, or to accredit NDT agencies, Guide E1359 shall be used as a basis for the survey. It can be supplemented as necessary with more detail in order to meet the auditor's specific needs.
1.3This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private.
1.4The use of SI or inch-pound units, or combination thereof, will be the responsibility of the technical committee whose standards are referred to in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
E 07
|
| DocumentType |
Redline
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM E 1219 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
| ASTM E 2003 : 2010 : R2014 | Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASTM E 690 : 2015 : REDLINE | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
| ASTM E 2700 : 2014 : REDLINE | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ASTM E 545 : 2014 : REDLINE | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
| ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
| ASTM F 846 : 1992 : R1998 | Standard Guide for Testing Performance of Amusement Rides and Devices |
| ASTM E 1571 : 2011 : R2016 : EDT 1 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 1030/E1030M : 2015 : REDLINE | Standard Practice for Radiographic Examination of Metallic Castings |
| ASTM D 5339 : 1994 : R1998 | Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005) |
| ASTM E 2984/E2984M : 2014 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
| ASTM E 2023 : 2010 : R2014 | Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
| ASTM E 2983 : 2014 | Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
| ASTM E 2907/E2907M : 2013 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ASTM E 94 : 2004 : R2010 | Standard Guide for Radiographic Examination |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ASTM E 2661/E2661M : 2015 : REDLINE | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
| ASTM E 1495/E1495M : 2017 : REDLINE | Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
| ASTM E 1817 : 2008 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
| ASTM E 2581 : 2014 : REDLINE | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
| ASTM E 1312 : 2009 : R2013 : EDT 1 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| UNE-EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| 15/30309725 DC : 0 | BS ISO 19016 - GAS CYLINDERS - CYLINDERS AND TUBES OF COMPOSITE CONSTRUCTION - MODAL ACOUSTIC EMISSION (MAE) TESTING FOR PERIODIC INSPECTION AND TESTING |
| ASTM E 1209 : 2010 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
| NFPA 1914 : 2002 | TESTING FIRE DEPARTMENT AERIAL DEVICES |
| ASTM C 1331 : 2018 : REDLINE | Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
| ASTM E 2024 : 2005 | Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
| ASTM E 569/E569M : 2013 : REDLINE | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ASTM E 751/E751M : 2017 : REDLINE | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
| ASTM E 1030 : 2005 : R2011 | Standard Test Method for Radiographic Examination of Metallic Castings |
| ASTM E 1255 : 2016 : REDLINE | Standard Practice for Radioscopy |
| ACI 349.3R : 2018 | REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES |
| ASTM E 1496 : 2005 : R2010 | Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
| ASTM E 1418 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
| ASTM E 2981 : 2015 | Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 1359 : 2017 : REDLINE | Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 2598 : 2007 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM E 749/E749M : 2017 : REDLINE | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
| ASTM E 2479 : 2016 : REDLINE | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
| ASTM E 1496 : 2005 | Standard Test Method for Neutron Radiographic Dimensional Measurements |
| ASTM E 1210 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
| ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
| ASTM E 2373/E2373M : 2014 : REDLINE | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
| ASTM E 999 : 2015 : REDLINE | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E 1888/E1888M : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 2096 : 2005 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ASTM E 588 : 2003 : R2009 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
| ASTM E 214 : 2005 | Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007) |
| ASTM E 588 : 2003 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
| ASTM E 1220 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
| ASTM E 1118/E1118M : 2016 : REDLINE | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1817 : 2008 : R2014 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
| ASTM E 797/E797M : 2015 : REDLINE | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
| ASTM E 1962 : 2014 : REDLINE | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ASTM E 2985/E2985M : 2014 | Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
| ASTM E 1774 : 2017 : REDLINE | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1067/E1067M : 2018 : REDLINE | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
| ASTM E 2096/E2096M : 2016 : REDLINE | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 2003 : 2010 | Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
| ASTM E 2580 : 2017 : REDLINE | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 2191/E2191M : 2016 : REDLINE | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 2662 : 2015 : REDLINE | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 588 : 2003 : R2014 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
| ASTM E 1742/E1742M : 2018 : REDLINE | Standard Practice for Radiographic Examination |
| ASTM E 94 : 2004 | Standard Guide for Radiographic Examination |
| ASTM E 2884 : 2017 : REDLINE | Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
| ASTM E 1961 : 2016 : REDLINE | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM F 846 : 1992 : R2009 | Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) |
| ASTM E 1211/E1211M : 2017 : REDLINE | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| ASTM E 1030 : 2005 | Standard Test Method for Radiographic Examination of Metallic Castings |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
| I.S. EN ISO 16148:2016 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBE - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
| ASTM E 215 : 2016 : REDLINE | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E 2023 : 2010 | Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
| ASTM E 2775 : 2016 : REDLINE | Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction |
| ASTM E 114 : 2015 : REDLINE | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
| ASTM E 2003M : 1998 | Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
| ASTM E 1312 : 2009 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ACI 343.1R : 2012 | GUIDE FOR THE ANALYSIS AND DESIGN OF REINFORCED AND PRESTRESSED CONCRETE GUIDEWAY STRUCTURES |
| ASTM E 587 : 2015 : REDLINE | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
| MIL-A-11356 Revision F:1987 | ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
| AWS C3.8M/C3.8 : 2011 | SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS |
| ASTM E 801 : 2016 : REDLINE | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
| ASTM E 2929 : 2013 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
| ASTM E 1571 : 2011 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 3100 : 2017 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| ASTM E 2076/E2076M : 2015 : REDLINE | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1033 : 2013 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
| ASTM E 664/E664M : 2015 : REDLINE | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1212 : 2017 : REDLINE | Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1814 : 2014 : REDLINE | Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM F 846 : 1992 : R2003 | Standard Guide for Testing Performance of Amusement Rides and Devices |
| ASTM E 1930/E1930M : 2017 : REDLINE | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 2338 : 2017 : REDLINE | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
| ASTM E 3052 : 2016 | Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM E 1736 : 2015 : REDLINE | Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
| DIN EN ISO 16148:2016-09 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
| ISO 16148:2016 | Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
| ASTM E 571 : 2012 : REDLINE | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
| ASTM E 2863 : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
| EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| 13/30247752 DC : 0 | BS EN ISO 16148 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING |
| ASTM E 2906/E2906M : 2013 | Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
| ASTM E 1001 : 2016 : REDLINE | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 2928/E2928M : 2017 : REDLINE | Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
| ASTM E 2104 : 2015 : REDLINE | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM E 329 : 2018 : REDLINE | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM E 94/E94M : 2017 : REDLINE | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 2261/E2261M : 2017 : REDLINE | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| ASTM E 1208 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM E 1161 : 2009 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| ASTM E 2930 : 2013 | Standard Practice for Pressure Decay Leak Test Method |
| ASTM E 2598/E2598M : 2013 : REDLINE | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 494 : 2015 : REDLINE | Standard Practice for Measuring Ultrasonic Velocity in Materials |
| ASTM E 1118 : 2005 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 2861 : 2016 : REDLINE | Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams |
| ASTM C 1332 : 2018 : REDLINE | Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
| ASTM E 1139/E1139M : 2017 : REDLINE | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 1606 : 2015 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
| ASTM E 2478 : 2011 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| BS EN ISO 16148:2016 | Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
| ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1001 : 2016 : REDLINE | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 1254 : 2013 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1118 : 2005 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 801 : 2016 : REDLINE | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
| ASTM E 1033 : 2013 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 127 : 2015 : REDLINE | Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks |
| ASTM E 1629 : 2012 : REDLINE | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 2479 : 2016 : REDLINE | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ASTM E 1888/E1888M : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| NAS410:2003 | NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASTM E 1962 : 2014 : REDLINE | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 114 : 2015 : REDLINE | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
| ASTM E 2096 : 2005 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 908 : 1998 : R2018 | Standard Practice for Calibrating Gaseous Reference Leaks |
| ASTM E 493 : 2006 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
| ASTM E 1961 : 2016 : REDLINE | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM E 690 : 2015 : REDLINE | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
| ASTM E 1212 : 2017 : REDLINE | Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 750 : 2015 : REDLINE | Standard Practice for Characterizing Acoustic Emission Instrumentation |
| ASTM E 494 : 2015 : REDLINE | Standard Practice for Measuring Ultrasonic Velocity in Materials |
| ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 797 : 2005 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 587 : 2015 : REDLINE | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
| ASTM E 2700 : 2014 : REDLINE | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
| ASTM E 999 : 2015 : REDLINE | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ASTM E 650 : 1997 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 545 : 2014 : REDLINE | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ASTM E 976 : 2015 : REDLINE | Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
| ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM E 1606 : 2015 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
| ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
| ASTM E 317 : 2016 : REDLINE | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
| ASTM E 571 : 2012 : REDLINE | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ASTM E 1359 : 2017 : REDLINE | Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 803 : 1991 | Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM E 2374 : 2016 : REDLINE | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 215 : 2016 : REDLINE | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E 2075 : 2005 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 592 : 2015 : REDLINE | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates <fraction><num>1</num><den>4 </den></fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60 |
| ASTM E 2534 : 2015 : REDLINE | Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
| ASTM E 1774 : 2017 : REDLINE | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
£69.29
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.