We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM E 709 : 2015 : REDLINE

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Standard Guide for Magnetic Particle Testing

    Available format(s):  PDF

    Superseded date:  09-08-2021

    Language(s):  English

    Published date:  15-06-2015

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 03.03, 2017 Specifies techniques for both dry and wet magnetic particle testing, a nondestructive method for detecting cracks and other discontinuities at or near the surface in ferromagnetic materials.

    Scope - (Show below) - (Hide below)

    1.1This guide2 covers techniques for both dry and wet magnetic particle testing, a nondestructive method for detecting cracks and other discontinuities at or near the surface in ferromagnetic materials. Magnetic particle testing may be applied to raw material, semifinished material (billets, blooms, castings, and forgings), finished material and welds, regardless of heat treatment or lack thereof. It is useful for preventive maintenance testing.

    1.1.1This guide is intended as a reference to aid in the preparation of specifications/standards, procedures and techniques.

    1.2This guide is also a reference that may be used as follows:

    1.2.1To establish a means by which magnetic particle testing, procedures recommended or required by individual organizations, can be reviewed to evaluate their applicability and completeness.

    1.2.2To aid in the organization of the facilities and personnel concerned in magnetic particle testing.

    1.2.3To aid in the preparation of procedures dealing with the examination of materials and parts. This guide describes magnetic particle testing techniques that are recommended for a great variety of sizes and shapes of ferromagnetic materials and widely varying examination requirements. Since there are many acceptable differences in both procedure and technique, the explicit requirements should be covered by a written procedure (see Section 21).

    1.3This guide does not indicate, suggest, or specify acceptance standards for parts/pieces examined by these techniques. It should be pointed out, however, that after indications have been produced, they must be interpreted or classified and then evaluated. For this purpose there should be a separate code, specification, or a specific agreement to define the type, size, location, degree of alignment and spacing, area concentration, and orientation of indications that are unacceptable in a specific part versus those which need not be removed before part acceptance. Conditions where rework or repair is not permitted should be specified.

    1.4This guide describes the use of the following magnetic particle method techniques.

    1.4.1Dry magnetic powder (see 8.4),

    1.4.2Wet magnetic particle (see 8.5),

    1.4.3Magnetic slurry/paint magnetic particle (see 8.5.7), and

    1.4.4Polymer magnetic particle (see 8.5.8).

    1.5Personnel Qualification—Personnel performing examinations in accordance with this guide should be qualified and certified in accordance with ASNT Recommended Practice No. SNT-TC-1A, ANSI/ASNT Standard CP-189, NAS 410, or as specified in the contract or purchase order.

    1.6Nondestructive Testing Agency—If a nondestructive testing agency as described in Practice E543 is used to perform the examination, the nondestructive testing agency should meet the requirements of Practice E543.

    1.7The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.8Warning: Mercury has been designated by many regulatory agencies as a hazardous material that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials.Caution should be taken when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.

    1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee E 07
    Development Note Supersedes ASTM E 138 and ASTM E 109 (11/2001)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
    MSS SP 53 : 2012 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD
    API 687 : 2001 : R2009 ROTOR REPAIR
    SAE J 420 : 2018 MAGNETIC PARTICLE INSPECTION
    ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
    06/30125909 DC : DRAFT OCT 2006 ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
    MIL A 53079 : 0 ANCHOR, NAVMOOR CAUSEWAY MOORING
    08/30190636 DC : DRAFT OCT 2008 BS ISO 10961 - GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
    API 11D3 :2008 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
    NORSOK M-123:2012 FORGED STRUCTURAL STEEL
    API 16C RUSSIAN : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
    API 5LCP :2006 SPECIFICATION FOR COILED LINE PIPE
    DIN EN ISO 10961:2012-06 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
    BS EN ISO 10961:2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION
    API 8A CHINESE : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
    API 2CCU : 2017 OFFSHORE CARGO CARRYING UNITS
    API 5L REDLINE : 2007 SPECIFICATION FOR LINE PIPE
    API 2I : 2008 : R2015 IN-SERVICE INSPECTION OF MOORING HARDWARE FOR FLOATING STRUCTURES
    08/30176215 DC : DRAFT JAN 2008 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
    API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
    API 7-1 : 2006 : INC : ADD 3 : 2011 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    08/30132226 DC : DRAFT MAR 2008 BS ISO 13535 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT
    API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    17/30361645 DC : DRAFT SEP 2017 BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
    BS EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
    ISO 15590-2:2003 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings
    04/30126605 DC : DRAFT DEC 2004 IEC 62256 ED.1 - HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - GUIDE FOR REHABILITATION AND PERFORMANCE IMPROVEMENT
    API 1104 RUSSIAN : 2013 WELDING OF PIPELINES AND RELATED FACILITIES
    API 2SF : 2013 MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS
    API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    API 5ST:2010 SPECIFICATION FOR COILED TUBING
    API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    ASTM A 1001 : 2001 : R2015 Standard Specification for High Strength Steel Castings in Heavy Sections
    PREN 4700-005 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    API 11V1 :1995 SPECIFICATION FOR GAS LIFT EQUIPMENT
    ASCE 48 05 : 2006 DESIGN OF STEEL TRANSMISSION POLE STRUCTURES
    API 2C : 2012 OFFSHORE PEDESTAL-MOUNTED CRANES
    AWS D15.1/D15.1M : 2012 RAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVES
    DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
    AWS D3.6M : 2010 UNDERWATER WELDING CODE
    PREN 4700-006 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    AWS D15.2/D15.2M : 2013 RECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS FOR USE BY RAIL VEHICLES
    AWS D14.1/D14.1M : 2005 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
    AWS D1.4/D1.4M : 2011 STRUCTURAL WELDING CODE - REINFORCING STEEL
    AWS D1.5M/D1.5 : 2015 BRIDGE WELDING CODE
    I.S. EN ISO 14998:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013)
    ASTM A 903/A903M : 1999 : R2017 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
    API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
    ASCE/SEI 19 10 : 2010 STRUCTURAL APPLICATIONS OF STEEL CABLES FOR BUILDINGS
    EN ISO 3183:2012/A1:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
    ASTM A 758/A758M : 2014 : REDLINE Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
    ASTM A 952/A952M : 2002 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
    ASTM A 1001 : 2001 : R2010 Standard Specification for High Strength Steel Castings in Heavy Sections
    ASTM F 541 : 2012 : REDLINE Standard Specification for Alloy Steel Eyebolts
    ASTM E 125 : 1963 : R2013 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
    ASTM F 3125 : 2015 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions
    ASTM B 851 : 2004 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
    ASTM A 1001 : 2001 : R2006 Standard Specification for High Strength Steel Castings in Heavy Sections
    ASTM F 3111 : 2016 : REDLINE Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
    UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
    ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
    ASTM A 834 : 1995 : R2001 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
    ASTM A 217/A217M : 2014 : REDLINE Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
    ASTM A 874/A874M :1998 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
    ASTM A 960/A960M : 2016-06 SPECIFICATION FOR COMMON REQUIREMENTS FOR WROUGHT STEEL PIPING FITTINGS
    ASTM A 834 : 1995 : R2015 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
    NFPA 1901:2016 AUTOMOTIVE FIRE APPARATUS
    BS EN ISO 14310:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
    BS EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
    ISO 13628-10:2005 Petroleum and natural gas industries Design and operation of subsea production systems Part 10: Specification for bonded flexible pipe
    BS EN ISO 10439:2002 PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS
    BS EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
    I.S. EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
    IEC 62256:2017 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
    ASTM A 903/A903M : 1999 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
    API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
    BIS IS/ISO 3183 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
    API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    BS EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    API 16C CHINESE : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
    API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
    BS EN ISO 14998:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES
    I.S. EN ISO 10439:2002 PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS
    BS MA 87-3:1987 SERIES 1 SHIPBORNE BARGES - SPECIFICATION FOR THE ARRANGEMENT, DIMENSIONS AND METHOD OF TEST FOR LIFTING POST CASTINGS
    API 5DP : 2010(R2015) SPECIFICATION FOR DRILL PIPE
    API 5LD REDLINE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
    API7-1 RUSSIAN-2006+ADD3-2011(R2015) SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    API 8A : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
    11/30238890 DC : 0 BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES
    API 2F : 1997 : R2015 SPECIFICATION FOR MOORING CHAIN
    MIL HDBK 728/4 : A MAGNETIC PARTICLE TESTING
    BS ISO 10961 : 2010 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION
    08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
    96/706683 DC : MAY 96 ISO 13707 RECIPROCATING COMPRESSORS FOR THE PETROLEUM AND GAS INDUSTRIES
    API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    BS EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    04/301931 DC : DRAFT JAN 2004 ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
    EEMUA 164 : 1993 SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1
    API 7-1 CHINESE : 2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    NF EN 4700-005 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    08/30190263 DC : DRAFT SEP 2008 BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
    API 20C : 2015 CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
    API 11D1 REDLINE : 2009 PACKERS AND BRIDGE PLUGS
    API STD 1104 SPANISH : 2013 WELDING OF PIPELINES AND RELATED FACILITIES
    API 7-1:2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    W59-13 Welded steel construction (metal arc welding)
    API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    EEMUA 151 : 1987 LIQUID RING VACUUM PUMPS AND COMPRESSORS
    ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
    API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    AWS D1.1/D1.1M PORTUGUESE : 2010 STRUCTURAL WELDING CODE - STEEL
    ISO 10433:1994 Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service
    ASTM A 125 : 1996 : R2001 Standard Specification for Steel Springs, Helical, Heat-Treated
    AWS A5.35/A5.35M : 2015 SPECIFICATION FOR COVERED ELECTRODES FOR UNDERWATER WET SHIELDED METAL ARC WELDING
    NACE RP 02 04 : 2004 STRESS CORROSION CRACKING (SCC) DIRECT ASSESSMENT METHODOLOGY
    API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 2I REDLINE : 2008 IN-SERVICE INSPECTION OF MOORING HARDWARE FOR FLOATING STRUCTURES
    API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    BS EN ISO 11961:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
    I.S. EN ISO 15551-1:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015)
    ANSI/AWWA C514 : 2015 AIR VALVE AND VENT INFLOW PREVENTER ASSEMBLIES FOR POTABLE WATER DISTRIBUTION SYSTEM AND STORAGE FACILITIES
    AWWA C516 : 2014 LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER
    EN ISO 11961:2008/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
    ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
    ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
    ASTM A 834 : 1995 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
    API 19G1 : 2010 SIDE-POCKET MANDRELS
    API 6AR : 1994 RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    ASTM F 3043 : 2015 : REDLINE Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
    ASTM B 851 : 2004 : R2009 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
    ASTM E 3024/E3024M : 2016 Standard Practice for Magnetic Particle Testing for General Industry
    ASTM A 125 : 1996 Standard Specification for Steel Springs, Helical, Heat-Treated
    ASTM E 543 : 2015 : REDLINE Standard Specification for Agencies Performing Nondestructive Testing
    EN ISO 10961 : 2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
    IEC 62256:2017 RLV Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
    ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
    BS EN ISO 13535:2001 (published 2002-07) Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment
    ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
    I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
    I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
    I.S. EN ISO 10423:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
    I.S. EN ISO 14310:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
    I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
    I.S. EN ISO 10438-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
    UNI EN 14870-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
    UNI EN ISO 10438-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
    NEMA TT 1 : 1983 TAPERED TUBULAR STEEL STRUCTURES,
    ASME B31.3:2016 PROCESS PIPING
    API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
    BS EN ISO 15551-1:2015 Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift
    API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
    API 5DP CHINESE : 2009 SPECIFICATION FOR DRILL PIPE
    API 5CRA CHINESE : 2011 SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
    AWWA C512 : 2015 AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE
    UNI EN ISO 10961 : 2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION
    11/30235499 DC : 0 BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
    NFPA 1914 : 2002 TESTING FIRE DEPARTMENT AERIAL DEVICES
    ASTM A 125 : 1996 : R2013 Standard Specification for Steel Springs, Helical, Heat-Treated
    IEEE 1630 : 2012 SUPPORTING STRUCTURES FOR OVERHEAD CONTACT SYSTEMS FOR TRANSIT SYSTEMS
    ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
    UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    API 5LD CHINESE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
    API 7-1 : 2006 : ADD 3:2011(R2015) SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    A A 52114 : A MATTAX, WITH CARRIER
    SAE AIR 4777 : 2013(R 2018) NONDESTRUCTIVE INSPECTION (NDI) METHODS USED DURING PRODUCTION AND OPERATION OF AIRCRAFT WHEELS AND BRAKES
    04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
    GGG C 313 : D CHISELS, HAND: CAPE, DIAMOND POINT, COLD, ROUND NOSE, AND SIDE CUTTING
    API 7-1 SPANISH : 2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    AWS D14.7/D14.7M : 2005 RECOMMENDED PRACTICES FOR SURFACING AND RECONDITIONING OF INDUSTRIAL MILL ROLLS
    ASTM A 903/A903M : 1999 : R2012 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
    AISC 358 : 2016 PREQUALIFIED CONNECTIONS FOR SPECIAL AND INTERMEDIATE STEEL MOMENT FRAMES FOR SEISMIC APPLICATIONS
    NF EN 4700-006 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
    API 2F : 1997 : R2010 SPECIFICATION FOR MOORING CHAIN
    ASTM A 903/A903M : 1999 : R2007 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
    API 5ST : 2010 : R2015 SPECIFICATION FOR COILED TUBING
    AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
    API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    ASTM A 356/A356M : 2011 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
    CSA S473 : 2004 STEEL STRUCTURES
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    API 5C8 : 2017 CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING
    API 7 : 2001 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    API 20B : 2013 OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
    API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    API 687 : 2001 ROTOR REPAIR
    API 11D1 CHINESE : 2009 PACKERS AND BRIDGE PLUGS
    B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
    I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
    ASTM E 3022 : 2015 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
    AGMA 2101 : D FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH (METRIC EDITION)
    ASTM A 1001 : 2001 Standard Specification for High Strength Steel Castings in Heavy Sections
    API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
    ASTM A 672/A672M : 2014 : REDLINE Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
    AGMA 2001 : D FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH
    ASTM A 781/A781M : 2018-02 SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE
    I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    UNI EN ISO 11961 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
    ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
    DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
    BS EN ISO 14693:2003 Petroleum and natural gas industries. Drilling and well-servicing equipment
    ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements
    ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
    UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
    EEMUA 179 : 1996 WORKING GUIDE FOR CARBON STEEL EQUIPMENT IN WET H[2]S SERVICE
    EN ISO 13680:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
    API 7K : 2015+ERR 2:2016 DRILLING AND WELL SERVICING EQUIPMENT
    API 14D : 1994 SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE
    UNI EN ISO 17078-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
    API 6RS : 1ED 90 SUPP 1 BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT
    EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
    UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
    UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
    UNI EN ISO 14310 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
    EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
    EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
    UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    UNI EN ISO 14998 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES
    03/305165 DC : DRAFT MAR 2003 ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
    ASTM A 125 : 1996 : R2007 Standard Specification for Steel Springs, Helical, Heat-Treated
    API 5LCP RUSSIAN : 2012 SPECIFICATION FOR COILED LINE PIPE
    07/30161097 DC : 0 EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS
    API 16R : 1997 : R2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
    API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
    API 5LCP CHINESE : 2007 SPECIFICATION FOR COILED LINE PIPE
    API 8C : 2012 DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
    BS EN 62256:2017 Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
    API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
    API 16RCD RUSSIAN : 2005 SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES
    API 5L PORTUGUESE : 2016 SPECIFICATION FOR LINE PIPE
    API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012 SPECIFICATION FOR COILED LINE PIPE
    AGMA 923 : B METALLURGICAL SPECIFICATIONS OF STEEL GEARING
    API 16A CHINESE : 2004 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
    MIL A 11356 : F ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE)
    API 5D : 2001 SPECIFICATION FOR DRILL PIPE
    API 2I :2008 IN-SERVICE INSPECTION OF MOORING HARDWARE FOR FLOATING STRUCTURES
    API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
    AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
    NACE SP 02 04 : 2015 STRESS CORROSION CRACKING (SCC) DIRECT ASSESSMENT METHODOLOGY
    AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
    API SPEC 19TT : 2016 SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT
    API 5CT METRIC : 1995 SPECIFICATION FOR CASING AND TUBING (METRIC UNITS)
    ASTM A 193/A193M : 2017 : REDLINE Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    MIL E 17813 : F EXPANSION JOINTS, PIPE, METALLIC BELLOWS
    AWS D14.5/D14.5M : 2009 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
    API 16R RUSSIAN : 2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
    ASTM A 952/A952M : 2002 : R2016 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
    13/30217541 DC : 0 BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT
    I.S. EN ISO 3183:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
    API 8A RUSSIAN : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
    09/30154810 DC : 0 BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT
    API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
    04/30107683 DC : DRAFT DEC 2004 BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS
    02/705659 DC : DRAFT APR 2002 ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
    API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
    ASTM E 125 : 1963 : R2008 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
    08/30141132 DC : DRAFT APR 2008 BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
    ASTM A 874/A874M : 1998 : R2004 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
    API 11D3 : 2008 : R2015 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
    API 2X : 2004 : R2015 RECOMMENDED PRACTICE FOR ULTRASONIC AND MAGNETIC EXAMINATION OF OFFSHORE STRUCTURAL FABRICATION AND GUIDELINES FOR QUALIFICATION OF TECHNICIANS
    API 7NRV CHINESE : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
    NF EN ISO 11961 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
    API 2F : 1997 SPECIFICATION FOR MOORING CHAIN
    API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    API 11V1 : 1995 : R2008 SPECIFICATION FOR GAS LIFT EQUIPMENT
    ASTM A 691 : 1998 : R2002 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
    API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 5ST CHINESE : 2010 SPECIFICATION FOR COILED TUBING
    API SPEC 5CRA : 2010 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
    API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
    EN 62256:2017 HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - REHABILITATION AND PERFORMANCE IMPROVEMENT (IEC 62256:2017)
    API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    AWS D1.6 : 1999 ERRATA 1999 STRUCTURAL WELDING CODE - STAINLESS STEEL
    AWS D14.1 : 1997 SPECIFICATION FOR WELDING INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
    I.S. EN 62256:2017 HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - REHABILITATION AND PERFORMANCE IMPROVEMENT
    I.S. EN ISO 10961:2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
    NFPA 1904 : 1991 AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS
    ASTM A 691 : 1998 : R2007 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
    ASCE/SEI 19 16 : 2016 STRUCTURAL APPLICATIONS OF STEEL CABLES FOR BUILDINGS
    API 5LD : 2017 CRA CLAD OR LINED STEEL PIPE
    ASTM A 903/A903M : 1999 : R2012 : EDT 1 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
    ASTM E 125 : 1963 : R1997 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
    API 7K CHINESE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
    ASTM A 356/A356M : 2011 : R2016 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
    I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    API 7-1 : 2006/ADD 4 : 2019 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
    ONORM EN ISO 3183 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
    EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
    BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
    BS EN ISO 13680:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
    BS EN ISO 10432:2004 (published 2005-01) Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
    ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
    BS EN ISO 13628-10:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    BS EN ISO 10440-1:2001 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    ISO 15551-1:2015 Petroleum and natural gas industries Drilling and production equipment Part 1: Electric submersible pump systems for artificial lift
    BS EN ISO 15136-2:2006 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems
    BS EN ISO 10424-1:2004 PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: ROTARY DRILL STEM ELEMENTS
    BS EN ISO 10423:2009 (published 2010-07) Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
    ISO 15136-2:2006 Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 2: Surface-drive systems
    BS EN ISO 10438-1:2003 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
    ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
    ISO 13535:2000 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    ISO 14998:2013 Petroleum and natural gas industries Downhole equipment Completion accessories
    ISO 14310:2008 Petroleum and natural gas industries Downhole equipment Packers and bridge plugs
    ISO 15136-1:2009 Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1: Pumps
    ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
    ISO 14693:2003 Petroleum and natural gas industries Drilling and well-servicing equipment
    ISO 13625:2002 Petroleum and natural gas industries Drilling and production equipment Marine drilling riser couplings
    BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
    ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
    ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
    BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends
    ISO 17078-1:2004 Petroleum and natural gas industries Drilling and production equipment Part 1: Side-pocket mandrels
    ISO 10961:2010 Gas cylinders Cylinder bundles Design, manufacture, testing and inspection
    EN ISO 10438-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
    EN ISO 10424-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: ROTARY DRILL STEM ELEMENTS
    EN ISO 15136-1 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
    EN 4700-005 : 2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
    EN ISO 14693 : 2003 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND WELL-SERVICING EQUIPMENT
    EN ISO 14310 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS (ISO 14310:2008)
    EN ISO 10439-1 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
    EN ISO 13535 : 2000 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT (ISO 13535:2000)
    EN ISO 13631 : 2002 PETROLEUM AND NATURAL GAS INDUSTRIES - PACKAGED RECIPROCATING GAS COMPRESSORS
    EN ISO 10423:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    EN ISO 14998 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013)
    EN ISO 10440-1 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    EN ISO 15136-2 : 2006 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE-DRIVE SYSTEMS
    EN ISO 15551-1 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015)
    EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
    EN 14870-2 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS (ISO 15590-2:2003 modified)
    EN ISO 13625 : 2002 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - MARINE DRILLING RISER COUPLINGS
    EN 4700-006 : 2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
    EN ISO 10439 : 2002 PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS
    API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
    API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
    03/301625 DC : DRAFT JAN 2003 BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT
    API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
    10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
    API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
    API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS