We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM E 8/E8M : 2021

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Standard Test Methods for Tension Testing of Metallic Materials

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  24-02-2021

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1These test methods cover the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area.

    1.2The gauge lengths for most round specimens are required to be 4D for E8 and 5D for E8M. The gauge length is the most significant difference between E8 and E8M test specimens. Test specimens made from powder metallurgy (P/M) materials are exempt from this requirement by industry-wide agreement to keep the pressing of the material to a specific projected area and density.

    1.3Exceptions to the provisions of these test methods may need to be made in individual specifications or test methods for a particular material. For examples, see Test Methods and Definitions A370 and Test Methods B557, and B557M.

    1.4Room temperature shall be considered to be 10 to 38°C [50 to 100°F] unless otherwise specified.

    1.5The values stated in SI units are to be regarded as separate from inch/pound units. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee E 28
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM A 888 : 2021 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    ASTM B 595 : 2021 Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts
    ASTM B 1007 : 2021 Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
    ASTM A 447/A447M : 2011 : R2021 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
    ASTM B 86 : 2018 : EDT 1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
    ASTM A 74 : 2021 Standard Specification for Cast Iron Soil Pipe and Fittings
    ASTM B 1018 : 2021 Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration Field Service
    ASTM B 427 : 2021 Standard Specification for Gear Bronze Alloy Castings
    ASTM B 1017 : 2021 Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration
    ASTM F 3506 : 2021 : EDT 1 Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems
    ASTM G 31 : 2021 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
    ASTM B 950 : 2021 : EDT 1 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
    ASTM B 751 : 2021 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
    ASTM F 3160 : 2021 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
    ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM B 88M : 2020 Standard Specification for Seamless Copper Water Tube (Metric)
    ASTM A 447/A447M : 2011 : R2016 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
    ASTM A 1095 : 2015 : R2019 Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
    ASTM B 453/B453M : 2019 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
    ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
    ASTM A 230/A230M : 2019 Standard Specification for Steel Wire, Carbon Valve Spring Quality
    ASTM A 878/A878M : 2019 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
    ASTM B 194 : 2015 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
    ASTM B 551/B551M : 2012 : R2017 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
    ASTM B 176 : 2018 Standard Specification for Copper-Alloy Die Castings
    ASTM B 506 : 2016 Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
    ASTM B 100 : 2020 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
    ASTM F 1083 : 2018 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
    ASTM B 197/B197M : 2020 Standard Specification for Copper-Beryllium Alloy Wire
    ASTM B 272 : 2012 : R2019 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
    ASTM F 799 : 2019 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
    ASTM F 3043 : 2015 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
    ASTM A 1109 : 2018 Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
    ASTM B 152/B152M : 2019 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
    ASTM B 306 : 2020 Standard Specification for Copper Drainage Tube (DWV)
    ASTM B 608 : 2018 Standard Specification for Welded Copper-Alloy Pipe
    ASTM B 101 : 2012 : R2019 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
    ASTM E 2818 : 2011(R2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
    ASTM B 829 : 2019 : REV A Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
    ASTM E 3205 : 2020 Standard Test Method for Small Punch Testing of Metallic Materials
    ASTM B 248 : 2017 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM B 251/B251M : 2017 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
    ASTM F 2229 : 2021 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
    ASTM F 90 : 2014 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
    ASTM F 468 : 2016 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
    ASTM B 22/B22M : 2017 Standard Specification for Bronze Castings for Bridges and Turntables
    ASTM B 694 : 2019 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
    ASTM A 74 : 2020 Standard Specification for Cast Iron Soil Pipe and Fittings
    ASTM B 592 : 2020 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM B 466/B466M : 2018 Standard Specification for Seamless Copper-Nickel Pipe and Tube
    ASTM B 447 : 2012 : REV A : R2021 Standard Specification for Welded Copper Tube
    ASTM F 2146 : 2013 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
    ASTM F 562 : 2013 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
    ASTM B 751 : 2020 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
    ASTM A 476/A476M : 2000 : R2018 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
    ASTM B 543/B543M : 2018 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
    ASTM B 768 : 2011 : R2016 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
    ASTM B 569 : 2019 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
    ASTM B 690 : 2018 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
    ASTM F 136 : 2013 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
    ASTM B 96/B96M : 2020 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
    ASTM B 1014 : 2020 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
    ASTM F 139 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
    ASTM B 68/B68M : 2019 Standard Specification for Seamless Copper Tube, Bright Annealed
    ASTM F 3273 : 2017 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
    ASTM B 48 : 2000 : R2016 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
    ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
    ASTM B 36/B36M : 2018 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
    ASTM A 608/A608M : 2020 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
    ASTM B 956 : 2019 : EDT 1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
    ASTM B 21/B21M : 2020 Standard Specification for Naval Brass Rod, Bar, and Shapes
    ASTM B 906 : 2019 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
    ASTM E 143 : 2020 Standard Test Method for Shear Modulus at Room Temperature
    ASTM F 138 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
    ASTM B 919 : 2019 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
    ASTM F 1058 : 2016 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
    ASTM F 1314 : 2018 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM B 301/B301M : 2013 : R2020 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
    ASTM B 248M : 2017 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
    ASTM A 842 : 2011 : REV A : R2018 : EDT 1 Standard Specification for Compacted Graphite Iron Castings
    ASTM B 837 : 2019 Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
    ASTM A 395/A395M : 1999 : R2018 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
    ASTM B 888/B888M : 2019 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
    ASTM F 2885 : 2017 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
    ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
    ASTM F 2063 : 2018 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
    ASTM B 446 : 2019 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
    ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
    ASTM A 1000/A1000M : 2017 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
    ASTM F 1043 : 2018 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
    ASTM E 468 : 2018 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
    ASTM B 639 : 2002 : R2018 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
    ASTM B 944 : 2011 : R2016 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
    ASTM B 302 : 2017 Standard Specification for Threadless Copper Pipe, Standard Sizes
    ASTM B 140/B140M : 2012 : R2017 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
    ASTM B 315 : 2019 Standard Specification for Seamless Copper Alloy Pipe and Tube
    ASTM G 143 : 2003 : R2018 Standard Test Method for Measurement of Web/Roller Friction Characteristics
    ASTM E 740/E740M : 2003 : R2016 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
    ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
    ASTM A 126 : 2004 : R2019 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
    ASTM B 986 : 2013 : R2019 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
    ASTM E 345 : 2016 Standard Test Methods of Tension Testing of Metallic Foil
    ASTM B 75/B75M : 2020 Standard Specification for Seamless Copper Tube
    ASTM F 3346 : 2019 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
    ASTM F 606/F606M : 2019 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    ASTM B 130 : 2019 Standard Specification for Commercial Bronze Strip for Bullet Jackets
    ASTM B 138/B138M : 2011 : R2017 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
    ASTM E 1921 : 2020 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
    ASTM A 746 : 2018 Standard Specification for Ductile Iron Gravity Sewer Pipe
    ASTM A 1056 : 2020 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
    ASTM A 47/A47M : 1999 : R2018 : EDT 1 Standard Specification for Ferritic Malleable Iron Castings
    ASTM F 961 : 2020 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
    ASTM F 2384 : 2010 : R2016 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
    ASTM B 160 : 2005 : R2019 Standard Specification for Nickel Rod and Bar
    ASTM B 169/B169M : 2020 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
    ASTM B 335 : 2003 : R2018 Standard Specification for Nickel-Molybdenum Alloy Rod
    ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
    ASTM F 67 : 2013 : R2017 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
    ASTM F 3001 : 2014 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
    ASTM B 819 : 2019 Standard Specification for Seamless Copper Tube for Medical Gas Systems
    ASTM A 1111 : 2018 Standard Specification for Cast Iron Closet Flanges for Use With Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
    ASTM A 716 : 2018 Standard Specification for Ductile Iron Culvert Pipe
    ASTM B 280 : 2020 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
    ASTM B 392 : 2018 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
    ASTM B 121/B121M : 2016 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
    ASTM B 462 : 2018 : EDT 1 Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
    ASTM F 2921 : 2013 : R2019 Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
    ASTM B 1009 : 2020 Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures
    ASTM A 220/A220M : 1999 : R2018 : EDT 1 Standard Specification for Pearlitic Malleable Iron
    ASTM B 134/B134M : 2015 Standard Specification for Brass Wire
    ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
    ASTM B 395/B395M : 2018 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
    ASTM B 969/B969M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
    ASTM B 411/B411M : 2014 : R2019 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
    ASTM B 740 : 2009 : R2015 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
    ASTM E 2472 : 2012 : R2018 : EDT 1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
    ASTM B 473 : 2007 : R2018 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
    ASTM E 606/E606M : 2019 : EDT 1 Standard Test Method for Strain-Controlled Fatigue Testing
    ASTM B 283/B283M : 2020 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
    ASTM F 1282 : 2017 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
    ASTM A 229/A229M : 2018 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
    ASTM B 359/B359M : 2018 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
    ASTM G 107 : 1995 : R2020 : EDT 1 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
    ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
    ASTM F 2516 : 2018 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
    ASTM B 988 : 2018 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
    ASTM F 519 : 2018 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
    ASTM E 647 : 2015 : EDT 1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
    ASTM B 643 : 2018 Standard Specification for Copper-Beryllium Alloy Seamless Tube
    ASTM E 2899 : 2019 : EDT 1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
    ASTM F 855 : 2020 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
    ASTM B 967/B967M : 2018 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
    ASTM B 162 : 1999 : R2019 Standard Specification for Nickel Plate, Sheet, and Strip
    ASTM B 929 : 2017 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
    ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
    ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
    ASTM B 164 : 2003 : R2019 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
    ASTM B 111/B111M : 2018 : REV A Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
    ASTM B 655/B655M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Bar and Wire
    ASTM B 776 : 2012 : R2019 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
    ASTM G 49 : 1985 : R2019 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
    ASTM E 531 : 2013 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
    ASTM E 2218 : 2015 Standard Test Method for Determining Forming Limit Curves
    ASTM B 99/B99M : 2015 Standard Specification for Copper-Silicon Alloy Wire for General Applications
    ASTM B 249/B249M : 2020 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
    ASTM B 1003 : 2016 Standard Specification for Seamless Copper Tube for Linesets
    ASTM B 691 : 2018 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
    ASTM B 49 : 2020 Standard Specification for Copper Rod for Electrical Purposes
    ASTM F 2066 : 2018 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
    ASTM E 1856 : 2013 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
    ASTM B 936 : 2019 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
    ASTM B 599 : 2020 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
    ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM B 168 : 2019 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
    ASTM B 882 : 2010 : R2018 Standard Specification for Pre-Patinated Copper for Architectural Applications
    ASTM F 1472 : 2020 : REV A Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
    ASTM A 888 : 2020 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    ASTM A 231/A231M : 2018 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
    ASTM A 571/A571M : 2001(R2019) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
    ASTM B 393 : 2018 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
    ASTM B 150/B150M : 2019 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
    ASTM B 159/B159M : 2017 Standard Specification for Phosphor Bronze Wire
    ASTM B 475 : 2007 : R2018 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
    ASTM B 974/B974M : 2016 : R2021 Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
    ASTM A 401/A401M : 2018 Standard Specification for Steel Wire, Chromium-Silicon Alloy
    ASTM E 2634 : 2018 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
    ASTM F 1350 : 2015 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
    ASTM A 942/A942M : 1995 : R2018 Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
    ASTM B 570 : 2016 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
    ASTM G 168 : 2017 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
    ASTM B 360 : 2020 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
    ASTM D 7147 : 2011 : R2018 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
    ASTM F 2924 : 2014 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
    ASTM B 88 : 2020 Standard Specification for Seamless Copper Water Tube
    ASTM B 804 : 2002 : R2018 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
    ASTM F 2660 : 2020 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
    ASTM B 371/B371M : 2019 Standard Specification for Copper-Zinc-Silicon Alloy Rod
    ASTM F 1295 : 2016 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
    ASTM B 1001 : 2017 Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
    ASTM F 2855 : 2019 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
    ASTM B 672 : 2002 : R2018 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
    ASTM F 1537 : 2020 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
    ASTM B 637 : 2018 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
    ASTM B 534 : 2020 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM C 1671 : 2020 : REV A Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
    ASTM A 1058 : 2019 Standard Test Methods for Mechanical Testing of Steel Products—Metric
    ASTM B 441 : 2016 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
    ASTM B 824 : 2017 Standard Specification for General Requirements for Copper Alloy Castings
    ASTM E 2207 : 2015 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
    ASTM F 2257 : 2014 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
    ASTM E 1221 : 2012 : REV A : R2018 : EDT 1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
    ASTM B 167 : 2018 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
    ASTM B 16/B16M : 2019 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
    ASTM F 1813 : 2013 Standard Specification for Wrought Titanium12 Molybdenum6 Zirconium2 Iron Alloy for Surgical Implant (UNS R58120)
    ASTM F 2989 : 2013 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
    ASTM B 122/B122M : 2020 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM B 103/B103M : 2019 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
    ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
    ASTM E 1304 : 1997 : R2020 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
    ASTM B 188 : 2015 : EDT 1 Standard Specification for Seamless Copper Bus Pipe and Tube
    ASTM B 352/B352M : 2017 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
    ASTM F 3055 : 2014 : REV A Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
    ASTM E 1012 : 2019 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
    ASTM B 42 : 2020 Standard Specification for Seamless Copper Pipe, Standard Sizes
    ASTM A 494/A494M : 2018 : REV A Standard Specification for Castings, Nickel and Nickel Alloy
    ASTM A 823 : 1999(R2019) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
    ASTM B 564 : 2019 Standard Specification for Nickel Alloy Forgings
    ASTM B 777 : 2015 : R2020 Standard Specification for Tungsten Base, High-Density Metal
    ASTM E 292 : 2018 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
    ASTM B 505/B505M : 2018 Standard Specification for Copper Alloy Continuous Castings
    ASTM B 574 : 2018 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
    ASTM B 30 : 2020 Standard Specification for Copper Alloys in Ingot and Other Remelt Forms
    ASTM E 185 : 2016 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
    ASTM F 560 : 2017 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
    ASTM B 523/B523M : 2018 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
    ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio r for Sheet Metal
    ASTM F 1091 : 2020 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
    ASTM B 834 : 2017 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
    ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
    ASTM B 541 : 2001 : R2018 Standard Specification for Gold Electrical Contact Alloy
    ASTM B 467 : 2014 Standard Specification for Welded Copper-Nickel Pipe
    ASTM B 62 : 2017 Standard Specification for Composition Bronze or Ounce Metal Castings
    ASTM B 427 : 2009 : R2015 Standard Specification for Gear Bronze Alloy Castings
    ASTM B 587 : 2019 Standard Specification for Welded Brass Tube
    ASTM A 473 : 2019 Standard Specification for Stainless Steel Forgings
    ASTM E 488/E488M : 2018 Standard Test Methods for Strength of Anchors in Concrete Elements
    ASTM B 148 : 2018 Standard Specification for Aluminum-Bronze Sand Castings
    ASTM B 927/B927M : 2017 Standard Specification for Brass Rod, Bar, and Shapes
    ASTM B 163 : 2019 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
    ASTM A 834 : 1995 : R2020 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
    ASTM E 1681 : 2003 : R2020 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
    ASTM B 493/B493M : 2014 : R2019 Standard Specification for Zirconium and Zirconium Alloy Forgings
    ASTM B 870 : 2008 : R2014 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
    ASTM B 805 : 2006 : R2017 : EDT 1 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
    ASTM B 19 : 2020 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
    ASTM B 370 : 2012 : R2019 Standard Specification for Copper Sheet and Strip for Building Construction
    ASTM A 874/A874M : 1998 : R2018 : EDT 1 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
    ASTM B 98/B98M : 2013 : R2019 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
    ASTM A 536 : 1984 : R2019 : EDT 1 Standard Specification for Ductile Iron Castings
    ASTM A 278/A278M : 2001 : R2020 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)
    ASTM B 684/B684M : 2016 Standard Specification for Platinum-Iridium Electrical Contact Materials
    ASTM B 775/B775M : 2019 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
    ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
    ASTM B 903 : 2015 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
    ASTM B 552 : 2019 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
    ASTM A 232/A232M : 2018 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
    ASTM B 688 : 2018 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip
    ASTM B 709 : 2017 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
    ASTM F 688 : 2019 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
    ASTM E 2215 : 2019 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
    ASTM B 465 : 2020 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
    ASTM B 351/B351M : 2013 : R2018 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
    ASTM F 3046 : 2013 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
    ASTM C 1187 : 2020 : REV A Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
    ASTM B 196/B196M : 2018 Standard Specification for Copper-Beryllium Alloy Rod and Bar
    ASTM A 197/A197M : 2000(R2019) Standard Specification for Cupola Malleable Iron
    ASTM B 640 : 2012 : REV A : R2021 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
    ASTM B 743 : 2012 : R2020 Standard Specification for Seamless Copper Tube in Coils
    ASTM B 86 : 2018 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
    ASTM F 75 : 2018 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
    ASTM B 950 : 2021 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
    ASTM F 620 : 2020 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
    ASTM B 139/B139M : 2012 : R2017 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
    ASTM B 1005 : 2017 Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
    ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
    ASTM B 206/B206M : 2012 : R2017 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
    ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
    ASTM G 111 : 1997 : R2018 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
    ASTM F 1044 : 2005 : R2017 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
    ASTM B 171/B171M : 2018 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
    ASTM B 658/B658M : 2011 : R2020 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
    ASTM B 1007 : 2017 Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
    ASTM B 394 : 2018 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
    ASTM F 2886 : 2017 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
    ASTM B 354 : 2019 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
    ASTM B 654/B654M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
    ASTM B 747 : 2020 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
    ASTM F 2581 : 2012 : R2017 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
    ASTM B 43 : 2020 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
    ASTM A 439/A439M : 2018 Standard Specification for Austenitic Ductile Iron Castings
    ASTM E 290 : 2014 Standard Test Methods for Bend Testing of Material for Ductility
    ASTM B 752/B752M : 2018 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
    ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
    ASTM B 937 : 2018 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
    ASTM B 166 : 2019 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
    ASTM B 250/B250M : 2019 Standard Specification for General Requirements for Wrought Copper Alloy Wire
    ASTM F 1387 : 2019 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
    ASTM E 328 : 2021 Standard Test Methods for Stress Relaxation for Materials and Structures
    ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
    ASTM B 981/B981M : 2019 Standard Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes
    ASTM B 591 : 2020 : REV A Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
    ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM A 370 : 2021 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
    ASTM D 1566 : 2021 : REV A Standard Terminology Relating to Rubber
    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM E 83 : 1998 : EDT 1 Standard Practice for Verification and Classification of Extensometer
    ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM A 356/A356M : 2016 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
    ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
    ASTM E 1856 : 2013 : R2021 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
    ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
    ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM A 356/A356M : 2021 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
    ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
    ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective