• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 92 : 1982 : R2003 : EDT 2

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010)
Available format(s)

Hardcopy , PDF

Withdrawn date

01-01-2010

Language(s)

English

Published date

31-12-2010

1.1 This test method covers the determination of the Vickers hardness of metallic materials, using applied forces of 1 kgf to 120 kgf, the verification of Vickers hardness testing machines (Part B), and the calibration of standardized hardness test blocks (Part C). Two general classes of standard tests are recognized:

1.1.1 Verification, Laboratory, or Referee Tests, where a high degree of accuracy is required.

1.1.2 Routine Tests, where a somewhat lower degree of accuracy is permissible.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 28
DocumentType
Test Method
Pages
9
ProductNote
Reconfirmed EDT 2 ́1NOTE—Section 3.2 was editorially updated in June 2003. ́2NOTE—Table 3 was editorially corrected in June 2004.
PublisherName
American Society for Testing and Materials
Status
Withdrawn
SupersededBy
Supersedes

ASTM F 561 : 2019 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM B 386/B386M : 2019 : EDT 1 Standard Specification for Molybdenum and Molybdenum Alloy Plate,<brk/>Sheet, Strip, Foil, and Ribbon
ASTM F 880M : 2016 Standard Specification for Stainless Steel Socket Set Screws (Metric) (Withdrawn 2023)
ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM F 879 : 2015 : R2020 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F 467M : 2006 : REV A : R2018 Standard Specification for Nonferrous Nuts for General Use (Metric)
ASTM F 3348 : 2020 : REV B Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM A 532/A532M : 2010 : R2019 Standard Specification for Abrasion-Resistant Cast Irons
ASTM F 606/F606M : 2019 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM B 387 : 2018 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
ASTM E 140 : 2012 : REV B : R2019 : EDT 1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM B 974/B974M : 2016 : R2021 Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
ASTM F 468M : 2006 : R2018 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
ASTM F 1466 : 2020 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM F 879M : 2016 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Withdrawn 2023)
ASTM A 182/A182M : 2020 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM E 2554 : 2018 : EDT 1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM F 621 : 2012 : R2017 Standard Specification for Stainless Steel Forgings for Surgical Implants
ASTM D 7688 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
ASTM F 837M : 2020 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] (Withdrawn 2023)
ASTM B 388 : 2006 : R2018 Standard Specification for Thermostat Metal Sheet and Strip
ASTM G 193 : 2020 : REV A Standard Terminology and Acronyms Relating to Corrosion
ASTM F 961 : 2020 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
ASTM A 335/A335M : 2019 : REV A Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM F 620 : 2020 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
ASTM F 468 : 2016 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM E 2546 : 2015 Standard Practice for Instrumented Indentation Testing
ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM F 3347 : 2020 : REV A Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM A 450/A450M : 2018 : REV A Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
ASTM F 1026 : 1986 : R2014 Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
ASTM A 1038 : 2019 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM F 1058 : 2016 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
ASTM B 967/B967M : 2018 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
ASTM B 884 : 2011 : R2019 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM F 15 : 2004 : R2017 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
ASTM F 1684 : 2006 : R2016 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM G 73 : 2010 : R2017 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
ASTM F 837 : 2020 Standard Specification for Stainless Steel Socket Head Cap Screws
ASTM F 1325 : 1991 : R2016 Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
ASTM F 467 : 2013 : R2018 Standard Specification for Nonferrous Nuts for General Use
ASTM A 1016/A1016M : 2018 : REV A Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM F 1079 : 1987 : R2014 Standard Specification for Inserted and Noninserted Surgical Scissors
ASTM F 1613 : 1995 : R2016 Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.