ASTM E 950 : 1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-11-2014
English
10-12-1998
CONTAINED IN VOL. 04.03, 2009 Establishes the measurement and recording of the profile of vehicular-traveled surfaces with an accelerometer established inertial reference on a profile-measuring vehicle.
1.1 This test method covers the measurement and recording of the profile of vehicular-traveled surfaces with an accelerometer established inertial reference on a profile-measuring vehicle.
1.2 The test method uses measurement of the distance between an inertial plane of reference and the traveled surface along with the acceleration of the inertial platform to detect changes in elevation of the surface along the length being traversed by the instrumented vehicle. In order to meet a particular class, the transducers must meet accuracy requirements and the calculated profile must meet the specifications of that class.
1.3 The values measured represent a filtered profile measured from a moving plane of reference using the equipment and procedures stated herein. The profile measurements obtained should agree with actual elevation measurements that are subjected to the same filtering. Selection of proper filtering allows the user to obtain suitable wavelength information for the intended data processing.
1.4 Either metric or inch-pound units may be used, but must be used consistently and not mixed.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary information is given in Section 6.
| Committee |
E 17
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| DIN EN ISO 13473-5:2010-04 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| ASTM E 1448 : 1992 : R1998 | Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| BS EN 13036-6:2008 | Road and airfield surface characteristics. Test methods Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges |
| ASTM E 1927 : 1998 : R2018 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1448/E1448M : 2009 : R2015 | Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| ASTM E 1364 : 1995 : R2012 | Standard Test Method for Measuring Road Roughness by Static Level Method |
| ASTM E 1170 : 1997 : R2012 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1364 : 1995 : R2005 | Standard Test Method for Measuring Road Roughness by Static Level Method |
| ASTM E 867 : 2006 | Standard Terminology Relating to Vehicle-Pavement Systems |
| ASTM E 1448/E1448M : 2009 | Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| ASTM E 2034 : 1999 : R2003 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| ASTM E 1777 : 2009 : R2015 | Standard Guide for Prioritization of Data Needs for Pavement Management |
| EN 13036-6:2008 | Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges |
| ASTM E 1170 : 1997 : R2007 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| AASHTO R 43 : 2013 | PRACTICE FOR QUANTIFYING ROUGHNESS OF PAVEMENTS |
| I.S. EN ISO 13473-5:2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| ASTM E 1364 : 1995 : R2017 | Standard Test Method for Measuring Road Roughness by Static Level Method |
| ASTM E 867 : 2006 : R2012 | Standard Terminology Relating to Vehicle-Pavement Systems |
| ASTM E 2034 : 1999 : R2012 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| ASTM E 1500 : 1993 | Practice for Computing Mean Square Numerics from Road Surface Elevation Profile Records (Withdrawn 1998) |
| BS ISO 13473-5 : 2009 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| ASTM E 1364 : 1995 : R2000 | Standard Test Method for Measuring Road Roughness by Static Level Method |
| ASTM E 1170 : 1997 : R2006 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1926 : 2008 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM E 1489 : 2008 | Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM E 2034 : 1999 : R2007 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| UNI EN 13036-6 : 2008 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 6: MEASUREMENT OF TRANSVERSE AND LONGITUDINAL PROFILES IN THE EVENNESS AND MEGATEXTURE WAVELENGTH RANGES |
| DIN EN 13036-6:2008-06 | Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges |
| BS ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles Specification and classification of profilometers |
| ASTM E 1927 : 1998 : R2012 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| BS EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles Determination of megatexture |
| DIN ISO 13473-5:2009-10 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| AASHTO R 56 : 2014(R2018) | PRACTICE FOR CERTIFICATION OF INERTIAL PROFILING SYSTEMS |
| ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers |
| ASTM E 2034 : 1999 : R2017 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| ASTM E 2955 : 2013 | Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces |
| ASTM E 1927 : 1998 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1927 : 1998 : R2003 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1927 : 1998 : R2007 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1926 : 2008 : R2015 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
| ASTM E 1170 : 1997 : R2017 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles Part 5: Determination of megatexture |
| EN ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| UNE-EN ISO 13473-5:2010 | Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) |
| DIN EN 13036-6 E : 2008 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 6: MEASUREMENT OF TRANSVERSE AND LONGITUDINAL PROFILES IN THE EVENNESS AND MEGATEXTURE WAVELENGTH RANGES |
| ASTM E 1777 : 2009 | Standard Guide for Prioritization of Data Needs for Pavement Management |
| ASTM E 2034 : 1999 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
| ASTM E 1170 : 1997 : R2001 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| UNI EN ISO 13473-5 : 2010 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE |
| ASTM E 1448 : 1992 : R2004 | Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| ASTM E 1489 : 2008 : R2013 | Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM E 1170 : 1997 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
| I.S. EN 13036-6:2008 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 6: MEASUREMENT OF TRANSVERSE AND LONGITUDINAL PROFILES IN THE EVENNESS AND MEGATEXTURE WAVELENGTH RANGES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.