ASTM F 2063 : 2018
Current
Current
The latest, up-to-date edition.
Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-08-2018
This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, flat rolled products, and tubes containing nominally 54.5- to 57.0-weight percent nickel and used for the manufacture of medical devices and surgical implants.
1.1This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, flat rolled products, and tubes containing nominally 54.5- to 57.0-weight percent nickel and used for the manufacture of medical devices and surgical implants.
1.2Requirements are for mill product, measuring 5.50 to 94.0 mm [0.218 to 3.70 in.] in diameter or thickness. Mill product is not intended to have the final shape, final surface finish, or final properties of the medical device, implant, or their components. Finished NiTi cold-worked tube should be considered under Specification F2633.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
6
|
| ProductNote |
This Standard is also refer as ASTM E8/E8M-16a This Standard is also refer as ASTM E1019-18 This Standard is also refer as ASTM E 1245-03(2016) This Standard is also refer as ASTM E 1097-12(2017) This Standard is also refer as ASTM E 1447-09(2016) This Standard is also refer as ASTM E1245 - 03(2016) This Standard is also refer asASTM E1941-10(2016) This Standard is also refer as ASTM F1710 - 08(2016) This Standard is also refer as ASTM F2005 - 05(2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM F 2004 : 2017 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2633 : 2013 | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| ASTM E 3097 : 2017 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
| ASTM E 3098 : 2017 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
| ASTM E 1245 : 2003 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM E 1447 : 2001 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1409 : 2013 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 1941 : 2010 : R2016 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1479 : 2016 | Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers |
| ASTM E 1447 : 2022 | Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 1245 : 1995 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM E 1941 : 2010 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM E 1479 : 1999 : R2005 | Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM E 1172 : 2016 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 2633 : 2007 | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| ASTM E 1245 : 2003 : R2008 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM E 1409 : 2004 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM F 2004 : 2003 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 1710 : 1997 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer |
| ASTM F 2004 : 2016 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2082 : 2003 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM F 2005 : 2000 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 1447 : 1992 : R1996 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1409 : 2013 : R2021 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 1409 : 2005 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM F 2633 : 2019 | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| ASTM E 1172 : 2022 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 1172 : 1987 : R2011 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1097 : 2003 | Standard Guide for Direct Current Plasma Emission Spectrometry Analysis |
| ASTM E 1019 : 2018 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques |
| ASTM E 1172 : 1987 : R2003 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1019 : 2003 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM E 1097 : 1997 | Standard Guide for Direct Current Plasma Emission Spectrometry Analysis |
| ASTM E 2465 : 2023 | Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM F 2005 : 2005 : R2015 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 2465 : 2011 : EDT 1 | Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1447 : 2004 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1097 : 2012 : R2017 | Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry |
| ASTM E 1019 : 2008 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1447 : 2009 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 2465 : 2006 | Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry |
| ASTM F 2004 : 2000 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM E 1479 : 1999 : R2011 | Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM F 2082 : 2006 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery (Withdrawn 2015) |
| ASTM E 1941 : 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
| ASTM E 1245 : 2000 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM F 2004 : 2005 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM E 1172 : 1987 : R1996 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM F 2005:2005 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 1097 : 2012 | Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry |
| ASTM F 2005 : 2005 : R2010 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 2465 : 2019 | Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM E 1097 : 2007 | Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis |
| ASTM F 2082 : 2001 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM F 2004 : 2005 : R2010 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM E 1409 : 1997 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM F 2005 : 2021 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 1409 : 2008 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 112 : 2013 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 1245 : 2003 : R2016 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM F 1710 : 2008 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer |
| ASTM F 2082 : 2015 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM F 2633 : 2013 | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| ASTM E 1941 : 1998 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
| ASTM E 1019 : 2000 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM F 2004 : 2017 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM E 1172 : 1987 : R2001 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1019 : 2002 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM F 1710 : 2008 : R2016 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2023) |
| ASTM E 1245 : 2003 : R2023 | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| ASTM E 1479 : 1999 | Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM E 1447 : 2005 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 1019 : 2011 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques |
| ASTM E 2465 : 2013 | Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
£52.59
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.