• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM F 477 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Available format(s)

Hardcopy , PDF

Superseded date

13-08-2021

Language(s)

English

Published date

02-12-2014

1.1This specification covers elastomeric seals (gaskets) used to seal the joints of plastic pipe used for gravity, low-pressure, and high-pressure applications. This refers to push-on joints which require no internal or external pressure to effect the initial seal.

1.2Requirements are given for natural or synthetic rubber gaskets, or a combination of both.

1.3The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
F 17
DocumentType
Standard
Pages
4
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM F 2435 : 2015 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F 1483 : 2017 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
ASTM F 3219 : 2019 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM F 2510/F2510M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
ASTM F 1668 : 2016 Standard Guide for Construction Procedures for Buried Plastic Pipe
ASTM F 1759 : 1997 : R2018 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM D 3517 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D 2680 : 2020 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM F 2947/F2947M : 2021 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM A 1107/A1107M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
ASTM D 3139 : 2019 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM F 2562/F2562M : 2015 : R2019 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 2306/F2306M : 2020 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F 1970 : 2019 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
ASTM F 679 : 2016 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F 1803 : 2015 : R2019 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 2946 : 2012 : R2017 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM D 3754 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM F 894 : 2019 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F 891 : 2016 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM D 5685 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM F 2763/F2763M : 2016 : R2021 : EDT 1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 1901 : 2016 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM F 3371 : 2019 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
ASTM D 3262 : 2020 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM F 949 : 2020 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM D 2321 : 2020 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM F 1336 : 2020 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F 2737 : 2011 : R2017 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F 2881/F2881M : 2021 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2764/F2764M : 2019 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM F 794 : 2021 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D 4161 : 2014 : R2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM F 645 : 2018 : REV B Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM D 3840 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D 3212 : 2020 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM F 3058 : 2016 : R2021 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
ASTM F 2649 : 2014 : R2019 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM D 6783 : 2005 : REV A : R2017 Standard Specification for Polymer Concrete Pipe
ASTM F 1866 : 2018 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ASTM F 1760 : 2016 : R2020 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F 1488 : 2014 : R2019 Standard Specification for Coextruded Composite Pipe
ASTM C 1903 : 2021 Standard Specification for Precast Concrete Duct Bank

ASTM D 1566 : 2004 : REV A Standard Terminology Relating to Rubber
ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1566 : 2009 Standard Terminology Relating to Rubber
ASTM D 1566 : 2006 Standard Terminology Relating to Rubber
ASTM D 1566 : 2008 : REV A Standard Terminology Relating to Rubber
ASTM D 1149 : 2016 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 1229 : 1987 : R1997 : EDT 1 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D 1349 : 2014 : R2019 Standard Practice for Rubber—Standard Conditions for Testing
ASTM D 1566 : 2005 Standard Terminology Relating to Rubber
ASTM D 1415 : 2005 Standard Test Method for Rubber Property—International Hardness
ASTM D 1414 : 1994 : R2013 Standard Test Methods for Rubber O-Rings
ASTM D 1229 : 2003 : R2008 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D 1566 : 2002 : REV A Standard Terminology Relating to Rubber
ASTM F 913 : 2002 : R2021 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM D 1415 : 1988 : R1999 Standard Test Method for Rubber Property-International Hardness
ASTM D 1566 : 2007 Standard Terminology Relating to Rubber
ASTM D 1415 : 2018 Standard Test Method for Rubber Property—International Hardness
ASTM D 1566 : 2019 Standard Terminology Relating to Rubber
ASTM D 1415 : 1988 : R2004 Standard Test Method for Rubber Property—International Hardness
ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2015 Standard Terminology Relating to Rubber
ASTM D 1566 : 2008 Standard Terminology Relating to Rubber
ASTM D 1149 : 2015 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 1414 : 1994 : R2008 Standard Test Methods for Rubber O-Rings
ASTM D 1414 : 1994 : R2003 Standard Test Methods for Rubber O-Rings
ASTM D 1229 : 2003 Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 1566 : 2005 : REV A Standard Terminology Relating to Rubber
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2007 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2006 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2003 : REV A Standard Terminology Relating to Rubber
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM F 913 : 1995 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1566 : 2006 : REV B Standard Terminology Relating to Rubber
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1566 : 2005 : REV B Standard Terminology Relating to Rubber
ASTM D 1349 : 1999 Standard Practice for Rubber-Standard Temperatures For Testing
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 1566 : 2011 Standard Terminology Relating to Rubber
ASTM F 913 : 2002 : R2014 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM D 1415 : 1968 Standard Test Method for International Hardness Of Vulcanized Rubber
ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
ASTM D 1415 : 1988 : R1994 Standard Test Method for Rubber Property-International Hardness
ASTM D 1566 : 2000 : REV B Standard Terminology Relating to Rubber
ASTM D 1229 : 2003 : R2019 Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1349 : 2009 Standard Practice for Rubber-Standard Temperatures for Testing
ASTM D 1349 : 2014 Standard Practice for Rubber—Standard Conditions for Testing
ASTM D 1229 : 2003 : R2015 Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 1566 : 2014 Standard Terminology Relating to Rubber
ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1978 : REV A Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 1566 : 2010 Standard Terminology Relating to Rubber
ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1414 : 1994 : R1999 Standard Test Methods for Rubber O-Rings
ASTM D 1415 : 2006 : R2012 Standard Test Method for Rubber Property—International Hardness
ASTM D 1415 : 2006 Standard Test Method for Rubber Property—International Hardness
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2003 Standard Terminology Relating to Rubber
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1349 : 2007 Standard Practice for Rubber-Standard Temperatures for Testing
ASTM D 1566 : 2000 Standard Terminology Relating to Rubber
ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
ASTM D 1566 : 2007 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2005 : REV C Standard Terminology Relating to Rubber
ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2010 : EDT 1 Standard Terminology Relating to Rubber
ASTM D 1149 : 1999 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM F 913 : 2001 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1566 : 2008 : REV B Standard Terminology Relating to Rubber
ASTM D 1414 : 2015 Standard Test Methods for Rubber O-Rings

View more information
£55.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.