ASTM F 608 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-02-2024
English
06-06-2018
This test method covers only a laboratory test for determining the relative carpet dirt removal effectiveness of household/commercial vacuum cleaners when tested under specified conditions.
1.1This test method covers only a laboratory test for determining the relative carpet dirt removal effectiveness of household/commercial vacuum cleaners when tested under specified conditions.
1.2This test method is applicable to household/commercial types of upright, canister, and combination cleaners.
1.3The test method applies to embedded dirt removal from carpets, not the removal of surface litter and debris.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
F 11
|
| DocumentType |
Test Method
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 1284 : 2009 : R2016 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM F 2609 : 2011 : R2021 | Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners |
| ASTM F 1411 : 2011 : R2018 | Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM F 2828 : 2020 | Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System |
| ASTM F 1692 : 2001 : R2016 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM F 1601 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM F 555 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 2797 : 2019 | Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners |
| ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM F 2608 : 2015 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM F 884 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner |
| ASTM F 1409 : 2000 : R2005 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1038 : 2002 : R2006 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 1409 : 2000 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 2608 : 2007 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 1038 : 2002 : EDT 1 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 1038 : 2002 : R2016 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 2608 : 2015 : R2022 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM F 1334 : 2012 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1334 : 1997 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 2756 : 2011 | Standard Test Method for Determining Energy Consumption of Vacuum Cleaners |
| ASTM C 136/C136M : 2014 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM F 2608 : 2015 : EDT 1 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 1334 : 2018 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 2756 : 2009 | Standard Test Method for Standard Test Method for Determining Energy Consumption of Vacuum Cleaners |
| ASTM F 2608 : 2007 : R2014 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM F 1334 : 2011 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 1409 : 2000 : R2010 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1038 : 2002 : R2011 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 922 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| ASTM F 1334 : 2014 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1334 : 2002 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1409 : 2000 : R2005 : EDT 1 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1038 : 1998 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 2756 : 2011 : R2016 | Standard Test Method for Determining Energy Consumption of Vacuum Cleaners |
| ASTM F 1409 : 2016 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 655 : 2013 | Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing (Withdrawn 2022) |
| ASTM F 1334 : 2008 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.