• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM F 86 : 2021

Current
Current

The latest, up-to-date edition.

Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-06-2021

1.1This practice provides descriptions of surface characteristics, surface preparation, and marking for metallic surgical implants, with the purpose of improving the corrosion resistance of the implant surfaces and markings.

1.2Marking nomenclature and neutralization of endotoxin are not specified in this practice (see X1.4).

1.3Surface requirements and marking methods included in the implant specification shall take precedence over requirements listed in this practice, where appropriate.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Standard Practice
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 983 : 1986 : R2018 Standard Practice for Permanent Marking of Orthopaedic Implant Components
ASTM F 3446 : 2020 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator
ASTM F 763 : 2004 : R2016 Standard Practice for Short-Term Screening of Implant Materials
ASTM F 1714 : 1996 : R2018 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
ASTM F 366 : 2017 Standard Specification for Fixation Pins and Wires
ASTM F 732 : 2017 Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
ASTM F 1801 : 2020 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM F 1350 : 2015 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
ASTM F 2068 : 2015 Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023)
ASTM F 981 : 2004 : R2016 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
ASTM F 897 : 2019 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
ASTM F 1781 : 2015 Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
ASTM F 746 : 2004 : R2014 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM F 1672 : 2014 : R2019 Standard Specification for Resurfacing Patellar Prosthesis (Withdrawn 2023)
ASTM F 1611 : 2020 Standard Specification for Intramedullary Reamers
ASTM F 543 : 2017 Standard Specification and Test Methods for Metallic Medical Bone Screws
ASTM F 2091 : 2015 Standard Specification for Acetabular Prostheses (Withdrawn 2023)
ASTM F 2665 : 2021 Standard Specification for Total Ankle Replacement Prosthesis
ASTM F 1264 : 2016 : EDT 1 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F 2180 : 2017 Standard Specification for Metallic Implantable Strands and Cables
ASTM F 3047M : 2015 Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations
ASTM F 1408 : 2020 : REV A Standard Practice for Subcutaneous Screening Test for Implant Materials
ASTM F 2887 : 2017 Standard Specification for Total Elbow Prostheses
ASTM F 452 : 1976 : R2014 Standard Specification for Preformed Cranioplasty Plates
ASTM F 2083 : 2021 Standard Specification for Knee Replacement Prosthesis (Withdrawn 2023)
ASTM F 3143 : 2020 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator
ASTM F 1378 : 2018 : EDT 1 Standard Specification for Shoulder Prostheses
ASTM F 564 : 2017 Standard Specification and Test Methods for Metallic Bone Staples
ASTM F 1091 : 2020 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)

ASTM E 2657 : 2016 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM B 600 : 2022 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM E 2657 : 2021 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM E 2148 : 2016 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
ASTM B 600 : 2011 : R2017 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM E 2148 : 2021 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.