ASTM G 153 : 2013 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
Available format(s)
PDF
Language(s)
English
Published date
01-07-2013
CONTAINED IN VOL. 14.04, 2015 Defines the basic principals and operating procedures for using an enclosed carbon arc light and water apparatus to reproduce the weathering effects which occur when materials are exposed to sunlight through window glass, or direct sunlight, and to moisture as rain or dew whilst in actual use.
1.1This practice covers the basic principles and operating procedures for using enclosed carbon-arc light and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual use. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure. A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested.
1.2Test specimens are exposed to enclosed carbon arc light under controlled environmental conditions.
1.3Specimen preparation and evaluation of the results are covered in various methods or specifications for specific materials. General guidance is given in Practice G151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in ISO 4582.
| Committee |
G 03
|
| DevelopmentNote |
Supersedes ASTM G 23 (12/2001)
|
| DocumentType |
Redline
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| CSA C22.2 No. 42 : 2010 : INC : UPD 2 : 2016 : R201500 | GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| ASTM D 4313 : 2017 : REDLINE | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable |
| ASTM D 3424 : 2011 : REDLINE | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
| ASTM D 2219 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation |
| CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 | METALLIC OUTLET BOXES |
| SAE J 3082 : 2015 | AUXILIARY TWO CONDUCTOR ELECTRICAL POWER CONNECTOR FOR TRUCK-TRAILER HIGH POWER JUMPER CABLE |
| ASTM D 1047 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 2249 : 2001 | Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002) |
| ASTM D 750 : 2012 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM C 1530/C1530M : 2004 : R2010 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| CSA S808 : 2014 | SPECIFICATION FOR FIBRE-REINFORCED POLYMER (FRP) MATERIALS FOR EXTERNALLY REINFORCING STRUCTURES |
| BS ISO 2135:2017 | Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| 07/30127278 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| BS ISO 9370:2017 | Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method |
| SAE J 2691 : 2013 | 15 POLE CONNECTOR BETWEEN TOWING VEHICLES AND TRAILERS WITH 12 VOLT NOMINAL SUPPLY |
| SAE J 2863 : 2016 | AUTOMOTIVE TRAILER TOW CONNECTOR |
| CSA C22.2 No. 2515:2009 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| ASTM F 1665 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM G 141 : 2009 | Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM G 178 : 2016 : REDLINE | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
| ASTM F 1665 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| C22.2 NO. 83.1-07 (R2017) | Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007) |
| ASTM F 1664 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence |
| CSA C22.2 No. 42 : 2010 : INC : UPD 1 : 2013 | GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES |
| AWWA D121 : 2014 | BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE |
| CSA C22.2 No. 45.1 :2007 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| C22.2 NO. 18.3-12 (R2017) | Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B) |
| CSA C22.2 No. 18.3 : 2012 | CONDUIT, TUBING, AND CABLE FITTINGS |
| CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| CSA C22.2 No. 45.1 : 2007 : FR | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| CSA C22.2 No. 18.1 : 2013 | METALLIC OUTLET BOXES |
| ICEA S 105-692 : 2011 | 600 VOLT SINGLE LAYER THERMOSET INSULATED UTILITY UNDERGROUND DISTRIBUTION CABLES |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ASTM D 750 : 2012 : R2017 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM C 1530 : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| CSA C22.2 No. 198.2 : 2005 | SEALED WIRE CONNECTOR SYSTEMS |
| CSA C22.2 No. 198.2 : 2005 : R2015 | SEALED WIRE CONNECTOR SYSTEMS |
| CSA C22.2 No. 198.2 : 2005 : R2010 | SEALED WIRE CONNECTOR SYSTEMS |
| CSA C22.2 No. 83.1 : 2007 | ELECTRICAL METALLIC TUBING - STEEL |
| CSA C22.2 No. 83.1 : 2007 : INC : UPD 1 : 2012 : R201200 | ELECTRICAL METALLIC TUBING - STEEL |
| C22.2 NO. 18.5-13 (R2018) | Positioning devices (Bi-national standard, with UL 1565) |
| UL 514A:11ED 2013-02 | Metallic Outlet Boxes |
| CSA C22.2 42.1 : 2013 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| CSA C22.2 No. 18.5:2013 | POSITIONING DEVICES |
| ASTM G 141 : 2009 : R2013 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
| ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
| 16/30328596 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| CSA C22.2 No. 42 : 2010 : R2015 | GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES |
| ASTM D 529 : 2004 | Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013) |
| 16/30333706 DC : 0 | BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| C22.2 NO. 45.1-07 (R2017) | Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007) |
| C22.2 NO. 18.1-13 (R2018) | Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1) |
| CSA C22.2 No. 45.1 : 2007 : INC : UPD 2 : 2014 : R201200 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| CSA C22.2 No. 2515 : 2009 : R2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| SAE J 560 : 2016 | PRIMARY AND AUXILIARY SEVEN CONDUCTOR ELECTRICAL CONNECTOR FOR TRUCK-TRAILER JUMPER CABLE |
| CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| CSA C22.2 No. 42-1 : 2013 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ASTM D 6360 : 2015 : REDLINE | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 4363 : 2017 : REDLINE | Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| SAE J 2030 : 2015 | HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD |
| ASTM E 2513 : 2007 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM E 2136 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability |
| UL 514D:2ED 2013-06 | Cover Plates for Flush-Mounted Wiring Devices |
| ANSI/EIMA 99A : 2001 | EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) |
| ASTM D 2220 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation |
| CSA C22.2 No. 42 : 2010 | GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES |
| CSA C22.2 No. 42 : 2010 : INC : UPD 3 : 2017 : R201500 | GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES |
| ASTM F 1664 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence |
| CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 : R2012 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| ASTM D 5893 : 2004 | Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 | METALLIC OUTLET BOXES |
| CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 | CONDUIT, TUBING, AND CABLE FITTINGS |
| CSA C22.2 NO. 42.1:13 (R2017) | Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D) |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM F 668 : 2017 : REDLINE | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM F 1664 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM C 1530/C1530M : 2004(R2014) | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM D 1499 : 2013 : REDLINE | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASME A112.6.3 : 2016 | FLOOR AND TRENCH DRAINS |
| ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
£62.61
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.