• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM G 46 : 1994 : R2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Examination and Evaluation of Pitting Corrosion
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2021

Language(s)

English

Published date

06-11-2018

CONTAINED IN VOL. 03.02, 2015 Defines the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting corrosion to evaluate the extent of its effect.

1.1This guide covers the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting (See Terminology G15) corrosion to determine the extent of its effect.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
G 01
DocumentType
Guide
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM G 184 : 2006 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G 33 : 1999 : R2010 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 107 : 1995 : R2008 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 87 : 2002 Standard Practice for Conducting Moist SO<sub>2</sub> Tests
BS ISO 16784-2 : 2006 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM G 185 : 2006 : R2012 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 184 : 2006 : R2012 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM D 6208 : 2007 : R2014 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
NACE 11106 : 2006 MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS
ASTM F 2111 : 2001 : REV A Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 52 : 2000 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 162 : 1999 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 184 : 2006 : R2016 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G 202 : 2012 : R2016 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 199:2009 Standard Guide for Electrochemical Noise Measurement
ASTM G 202 : 2012 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 157 : 1998 : R2018 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
ASTM G 107 : 1995 : R2002 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM F 1110 : 2009 Standard Test Method for Sandwich Corrosion Test
ASTM G 50 : 2010 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
ASTM F 2111 : 2001 : REV A : R2017 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
BS EN ISO 16784-2:2008 Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
SAE AMS 2485 : 2016 COATING, BLACK OXIDE
ASTM G 31 : 2012 : REV A GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
ASTM G 71 : 1981 : R2014 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 52 : 2000 : R2016 : EDT 1 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 33 : 1999 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 150 : 2013 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM G 71 : 1981 : R2003 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
IEEE 1895:2014 BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
ASTM G 111 : 1997 : R2006 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM D 6208 : 2007 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM G 162 : 1999 : R2010 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 71 : 1981 : R1998 : EDT 1 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 52 : 2000 : R2011 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
I.S. EN ISO 16784-2:2008 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM G 111 : 1997 : R2013 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
NACE RP 04 97 : 2004 FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS
ASTM C 1187 : 2015 : REDLINE Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
ASTM F 2111 : 2001 : REV A : R2005 : EDT 1 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 189:2007 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G 48 : 2011 : R2015 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 33 : 1999 : R2020 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM C 1617 : 2019 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM G 170 : 2006 : R2020 : EDT 1 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM D 6208 : 2007 : R2020 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM G 71 : 1981 : R2019 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 16 : 2013 : R2019 Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM F 3268 : 2018 : REV A Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals
ASTM G 202 : 2012 : R2020 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 52 : 2020 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM C 1187 : 2020 : REV A Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
ASTM G 189 : 2007 : R2021 : EDT 1 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G 78 : 2020 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM F 1110 : 2009 : R2020 Standard Test Method for Sandwich Corrosion Test
ASTM G 107 : 1995 : R2020 : EDT 1 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 50 : 2020 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM F 3044 : 2020 Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
ASTM G 162 : 2018 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM G 31 : 2021 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
ASTM G 208 : 2012 : R2020 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM G 199 : 2009 : R2020 : EDT 1 Standard Guide for Electrochemical Noise Measurement
ASTM G 184 : 2006 : R2020 : EDT 1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G 48 : 2011 : R2020 : EDT 1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 185 : 2006 : R2020 : EDT 1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 161 : 2000 : R2018 Standard Guide for Corrosion-Related Failure Analysis
ASTM G 189 : 2007 : R2013 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G 1 : 2003 : R2011 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
NACE TM 01 69 : 2012 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
NACE RP 07 75 : 2005 PREPARATION, INSTALLATION, ANALYSIS, AND INTERPRETATION OF CORROSION COUPONS IN OILFIELD OPERATIONS
ASTM G 48 : 2011 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 199 : 2009 : R2014 Standard Guide for Electrochemical Noise Measurement
ASTM G 161 : 2000 : R2013 Standard Guide for Corrosion-Related Failure Analysis
ASTM G 31 : 2012 GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
ASTM G 157 : 1998 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G 87 : 2002 : R2013 Standard Practice for Conducting Moist SO<inf>2</inf> Tests
SAE J 2800 : 2007 LABORATORY CORROSION/FATIGUE TESTING OF VEHICLE SUSPENSION COIL SPRINGS
ASTM G 157 : 1998 : R2005 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G 161 : 2000 Standard Guide for Corrosion-Related Failure Analysis
ASTM G 217 : 2016 Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
ASTM G 170 :2006 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G 208 : 2012 : R2016 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM F 1110 : 2009 : R2014 Standard Test Method for Sandwich Corrosion Test
NASA MSFC SPEC 1870 : 2005 GUIDELINES FOR EVALUATION OF CORROSION INHIBITING PRESERVATIVES
UNI EN ISO 16784-2 : 2008 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM G 109 : 2007 : R2013 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
SAE CRP-4 : 1992 RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN GASOLINE/METHANOL FUEL MIXTURES
ASTM F 2111 : 2001 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 185 : 2006 : R2016 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 33 : 1999 : R2004 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 78 : 2015 : REDLINE Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM G 208 : 2012 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
NACE TM 04 99 : 2009 IMMERSION CORROSION TESTING OF CERAMIC MATERIALS
ASTM G 170 : 2006 : R2012 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G 111 : 1997 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G 71 : 1981 : R2009 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 87 : 2002 : R2018 Standard Practice for Conducting Moist SO<inf>2</inf> Tests
NACE 24238 : 2009 MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS
NACE RP 06 90 : 2004 STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT
API 579-1 : 2016 FITNESS-FOR-SERVICE
ASTM G 1 : 2003 : R2017 : EDT 1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G 157 : 1998 : R2013 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
API STD 17F : 2017 SUBSEA PRODUCTION CONTROL SYSTEMS
ASTM G 109 : 2007 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
NACE 31014 : 0 FIELD MONITORING OF CORROSION RATES IN OIL AND GAS PRODUCTION ENVIRONMENTS USING ELECTROCHEMICAL TECHNIQUES
ISO 16784-2:2006 Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
EN ISO 16784-2:2008 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
ASTM G 162 : 1999 : R2004 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 33 : 1999 : R2015 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 87 : 2002 : R2007 Standard Practice for Conducting Moist SO<sub>2</sub> Tests
ASTM G 52 : 2000 : R2006 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
DIN EN ISO 16784-2:2008-07 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
NACE SP 06 90 : 2009 STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT
NACE SP 04 15 : 2015 BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
ASTM G 4 : 2001 Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G 1 : 2003 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM F 2111 : 2001 : REV A : R2011 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 4 : 2001 : R2008 Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G 161 : 2000 : R2006 Standard Guide for Corrosion-Related Failure Analysis
ASTM G 111 : 1997 : R2018 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM F 3268 : 2018 Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals
ASTM G 4 : 2001 : R2014 Standard Guide for Conducting Corrosion Tests in Field Applications (Withdrawn 2023)
ASTM G 107 : 1995 : R2015 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 185 :2006 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 107 :1995 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 50 : 2010 : R2015 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM F 3044 : 2014 Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants

NACE RP0173:1973 COLLECTION AND IDENTIFICATION OF CORROSION PRODUCTS

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.