Name: AWS A5.14 : 1989
Brand: AWS

AWS A5.14 : 1989

Superseded

View Superseded by

NICKEL AND NICKEL-ALLOY BARE WELDING RODS AND ELECTRODES, SPECIFICATION FOR,

Superseded date

23-07-2013

Published date

23-11-2012

Publisher

American Welding Society

Personnel
Foreword
1 Scope
Section A - General requirements
2 Classification
3 Acceptance
4 Certification
5 Units of measure and rounding-off procedure
Section B - Tests, procedures, and requirements
6 Summary of tests
7 Retest
8 Chemical analysis
Section C - Manufacture, identification, and packaging
9 Method of manufacture
10 Standard sizes
11 Finish and uniformity
12 Standard package forms
13 Winding requirements
14 Filler metal identification
15 Packaging
16 Marking of packages
Appendix - Guide to AWS specification for nickel and
           nickel alloy bare welding electrodes and rods
A1 Introduction
A2 Classification system
A3 Acceptance
A4 Certification
A5 Ventilation during welding
A6 Welding considerations
A7 Description and intended use of electrodes and rods
A8 Special tests
Tables
1 Chemical composition requirements for nickel and
    nickel alloy electrodes and rods
2 Standard sizes
3 Standard package dimensions and weights
A1 Comparison of classifications
A2 Typical weld metal tensile properties
Figures
1 Dimensions for standard 4 in. (100 mm) spools
2 Dimensions for standard 8 in. (200 mm) and 12 in.
    (300 mm) spools

89 VERSION CONTAINED IN ASME PV CODE 2C AS SFA-5.14 Details requirements for the classification of the above for plasma, gas metal, gas tungsten and submerged arc welding including compositions in which the nickel content exceeds that of any other element.

DevelopmentNote	Supersedes A A 51173 (06/2003) Supersedes MIL R 5031 (B). (07/2004)
DocumentType	Standard
PublisherName	American Welding Society
Status	Superseded
SupersededBy	AWS A5.14/A5.14M : 2011
Supersedes	A-A-51173 Base Document:1987 MIL R 5031 : B

Standards	Relationship
SAE AMS 5786 : 2015	Similar to
SAE AMS 5768 : 2012	Similar to

SAE AMS 5839 : 2015	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 59NI - 22CR - 2.0MO - 14W - 0.35AL
SAE AMS 5836 : 2015	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.0MN - 20CR - 2.5CB(NB)
ASTM B 804 : 2002 : R2007	Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
DEFSTAN 02-304(PT4)/2(2002) : 2002	SHAFTING SYSTEMS AND PROPULSORS - PART 4: REQUIREMENTS FOR REPAIR OF MAIN PROPULSION SHAFTING
DEFSTAN 02-304(PT4)/3(2015) : 2015	SHAFTING SYSTEMS & PROPULSORS - PART 4: REQUIREMENTS FOR REPAIR OF MAIN PROPULSION SHAFTING
A-A-51173 Base Document:1987	RODS AND ELECTRODES, WELDING, BARE, NICKEL AND NICKEL ALLOY
PREN 4632-005 : 200P1	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 005: WELDING AND BRAZING OF HOMOGENOUS ASSEMBLIES OF HEAT RESISTING NI OR CO BASE ALLOYS
AWS F1.3 : 1999	A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT
AWS PRGWM : 1999	PRACTICAL REFERENCE GUIDE TO WELDING METALLURGY: KEY CONCEPTS FOR WELDABILITY
NFL 06 380-23 : 2006	WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 23: HOMOGENEOUS ASSEMBLIES HEAT RESISTING NI OR CO BASE ALLOYS
ASTM A 744/A744M : 2013 : REDLINE	Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ASTM B 804 : 2002 : R2013	Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
SAE AMS 5675H : 2014	NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 70NI - 2.5MN - 15.5CR - 3.0TI - 7.0FE
ASTM E 608/E608M : 2013 : REDLINE	SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES
ASTM B 804 : 2002 : R2018	Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
NASA SPEC 5004A : 2003	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
DEFSTAN 02-863/2(2010) : 2010	REQUIREMENTS FOR THE CLASSIFICATION, DIMENSIONS, TOLERANCES, WELD REPAIR AND GENERAL STANDARDS OF ACCEPTANCE FOR COPPER AND NICKEL ALLOY CASTINGS
NASA PRC 0010 : 2012	PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE
AWS EG4.0 : 1996	GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER
SAE AMS 5778 : 2015	NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 72NI - 15.5CR - 1.0CB(NB) - 2.4TI - 0.70AL - 7.0FE
SAE AMS 5679 : 2015	NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 73NI - 15.5CR - 2.2CB - 8.0FE
API 620 REDLINE : 2008	DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
NFL 06 380-22 : 2005	WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 22: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
NF EN 4632-005 : 2010	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 005: HOMOGENEOUS ASSEMBLIES OF HEAT RESISTING NI OR CO BASE ALLOYS
SAE AMS 5798 : 2016	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18FE
PREN 4632-004 : 200P1	WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
08/30195539 DC : 0	BS EN 4632-004 - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
SAE AS 1424 : 2014	HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE
ASTM E 608/E608M : 2013 : R2019	Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
ASTM B 804 : 2002	Standard Specification for UNS N08367 and UNS N08926 Welded Pipe