• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BIS IS 1364-6 : 2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
Superseded date

14-11-2019

Published date

12-01-2013

NATIONAL FOREWORD
1 Scope
2 Normative references
3 Dimensions
4 Specifications and reference standards
5 Designation
Bibliography

Describes the characteristics of hexagon nuts, style 2, with threads from M5 up to and including M36, with product grade A for threads d <= M16 and product grade B for threads d > M16.

Committee
BPD 33
DevelopmentNote
Supersedes BIS IS/ISO 4033. (02/2009)
DocumentType
Standard
PublisherName
Bureau of Indian Standards
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ISO 4033:2012 Identical

BIS IS 15859 : 2013 COTTON SEED DELINTING MACHINERY - BUFFING MACHINE WITH AIR JET AND NYLON BRUSH - SPECIFICATION
BIS IS 15860 : 2013 COTTON SEED DELINTING MACHINERY - AMMONIA COTTON SEED NEUTRALIZER MACHINE WITH AMMONIA VAPORIZER - SPECIFICATION
BIS IS 15861 : 2013 COTTON SEED DELINTING MACHINERY - POLLUTION CONTROL SYSTEM WITH SCRUBBER, CYCLONE, CHIMNEY, HOODS AND DUCTING - SPECIFICATION
BIS IS 15862 : 2013 COTTON SEED DELINTING MACHINERY - HCL GAS GENERATION UNIT - SPECIFICATION
BIS IS 15856 : 2010 COTTON SEED DELINTING MACHINERY - PRE-HEATING MACHINE - SPECIFICATION
BIS IS 15855 : 2010 COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION

ISO 4035:2012 Hexagon thin nuts chamfered (style 0) — Product grades A and B
BIS IS 14962-1 : 2001 AMD 1 2013 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLE AND BASIC DATA
ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B
ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
ISO 7412:1984 Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) Product grade C Property classes 8.8 and 10.9
IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br>
ISO 4042:1999 Fasteners Electroplated coatings
ISO 7417:1984 Hexagon nuts for structural bolting Style 2, hot-dip galvanized (oversize tapped) Product grade A Property class 9
ISO 4775:1984 Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10
ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B
ISO 4016:2011 Hexagon head bolts Product grade C
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
BIS IS 4218-3 : 1999 AMD 1 2012 ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS
ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
ISO 8676:2011 Hexagon head screws with metric fine pitch thread Product grades A and B
ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread
BIS IS 8536 : 1987(R2003) FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS
ISO 4015:1979 Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
BIS IS 1367-2 : 2002 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 2: TOLERANCES FOR FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
ISO 225:2010 Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
ISO 7414:1984 Hexagon nuts for structural bolting with large width across flats, style 1 Product grade B Property class 10
ISO 7413:1984 Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) Product grades A and B Property classes 5, 6 and 8
ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) Product grade B
BIS IS 1367-17 : 2005 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 17: INSPECTION, SAMPLING AND ACCEPTANCE PROCEDURE
ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
ISO 7411:1984 Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) Product grade C Property classes 8.8 and 10.9
ISO 6157-2:1995 Fasteners Surface discontinuities Part 2: Nuts
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
BIS IS 1367-10 : 2002 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 10: SURFACE DISCONTINUITIES - NUTS
BIS IS 1367-6 : 1994(R2015) TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS
ISO 10663:2012 Hexagon nuts with flange, style 2 — Fine pitch thread
ISO 3269:2000 Fasteners Acceptance inspection
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 4018:2011 Hexagon head screws Product grade C
BIS IS 1367-11 : 2002 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 11: ELECTROPLATED COATINGS
ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.