BS 5350-A2:1990
Current
Current
The latest, up-to-date edition.
Methods of test for adhesives. Adherends Guide to the selection of adherend materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
28-02-1990
Publisher
Foreword
0 Introduction
1 Scope
2 Principles of choice
3 Adherend materials
4 Pretreatment
Appendix
A Adherend materials for which it is impossible to give
a precise description
Tables
1 List of adherend materials obtainable to British
Standards
2 Adherend materials not available to British Standards
Figures
1 Straight grain test pieces
2 Grain inclination across face at maximum permissible
angle
3 Inclination of grain to the face
Lists British Standards that give specifications for commonly used adherend materials and gives guidance on properties to be controlled in materials for which there are no British Standards.
This Part of BS 5350 gives information on the availability and selection of materials commonly used as adherends where the requirements are for the following:
- general performance tests on adhesives;
- specific tests of adhesives for quality control or specification purposes and for the selection of adhesives.
NOTE. The titles of the publications referred to in this Part of BS 5350 are listed on pages 9 to 11.
| Committee |
PRI/52
|
| DevelopmentNote |
Supersedes 87/54479 DC. (08/2005) Reviewed and confirmed by BSI, January 2011. (12/2010)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| BS 5350-C6:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests Determination of bond strength in direct tension in sandwich panels |
| BS 5350-C5:2002 | Methods of test for adhesives Determination of bond strength in longitudinal shear for rigid adherends |
| BS 5350-C5:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests Determination of bond strength in longitudinal shear |
| BS 4921:1988 | Specification for sherardized coatings on iron or steel |
| BS 3650:1976 | Specification for oil-extended styrene-butadiene rubbers (SRB). Non-pigmented, emulsion polymerized, general purpose types (1700 series) |
| BS 2F 116:1975 | Specification for mercerized cotton parachute fabric |
| BS 2569(1955) : LATEST | SPRAYED METAL COATINGS |
| BS L 157:1978 | Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 4021:1971 | Specification for flexible polyurethane foam sheeting for use in laminates |
| BS 3073:1977 | Specification for nickel and nickel alloys: strip |
| BS 3290:1960 | Specification for toughened polystyrene extruded sheet |
| BS 849:1939 | Code of practice for plain sheet zinc roofing |
| BS 3F 57:1975 | Specification for scoured cotton fabric for inflatable equipments |
| BS 6431-4.1:1986 | Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 6% < E ≤ 10%. Group AIIb Specification for general products |
| BS 2TA 7:1973 | Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>) |
| BS 1763:1975 | Specification for thin PVC sheeting (calendered, flexible, unsupported) |
| BS 2F 123:1984 | Specification for woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns) |
| BS V 38:1967 | Specification for Sitka spruce as rough timber |
| BS 2875:1969 | Specification for copper and copper alloys. Plate |
| BS 2F 52:1959 | Flax reinforcement webbing for aeronautical purposes |
| BS 6561:1985 | Specification for zinc alloy sheet and strip for building |
| BS 690-5:1975 | Asbestos-cement slates and sheets Lining sheets and panels |
| BS F 127:1983 | Specification for nylon fabrics suitable for coating with natural or synthetic elastomers |
| BS 6431-7:1986 | Ceramic floor and wall tiles Specification for dust-pressed ceramic tiles with a water absorption of 3% < E ≤ 6%. Group BIIa |
| BS L 159:1978 | Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 2F 119:1982 | Specification for 145 g/m<sup>2</sup> to 210 g/m<sup>2</sup> nylon fabrics |
| BS 2871-1:1971 | Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation |
| BS L 165:1978 | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 5F 59:2002 | Braided linen (flax) cord for aerospace purposes |
| BS 6431-4.2:1986 | Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 6% < E ≤ 10%. Group AIIb Specification for specific products (terre cuite, cotto, baldosin catalan) |
| BS 6566-6:1985 | Plywood Specification for limits of defects for the classification of plywood by appearance |
| BS 2F 115:1975 | Specification for 50 g cotton fabric |
| BS 2F 111:1973 | Specification for flax harness webbing |
| BS L 164:1978 | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 690-2:1981 | Asbestos-cement slates and sheets Specification for asbestos-cement and cellulose-asbestos-cement flat sheets |
| BS 6431-8:1986 | Ceramic floor and wall tiles Specification for dust-pressed ceramic tiles with a water absorption of 6% < E ≤ 10%. Group BIIb |
| BS 6431-3.2:1986 | Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 3% < E ≤ 6%. Group AIIa Specification for specific products (terre cuite, cotto, baldosin catalan) |
| BS 3261:1960 | Flexible PVC flooring |
| BS 6431-3.1:1986 | Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 3% < E ≤ 6%. Group AIIa Specification for general products |
| BS 3472:1974 | Specification for styrene-butadiene rubber (SBR) - non-pigmented, emulsion polymerized, general purpose types (1500 series) |
| BS L 158:1978 | Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 2F 122:1978 | Specification for two ply cotton fabric for liferaft packs |
| BS 2TA 1:1974 | Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa) |
| TAPPI T 459 : 2013 | SURFACE STRENGTH OF PAPER (WAX PICK TEST) |
| BS 3830:1973 | Specification for vitreous enamelled steel building components |
| BS 1706:1990 | Method for specifying electroplated coatings of zinc and cadmium on iron and steel |
| BS 5669:1979 | Specification for wood chipboard and methods of test for particle board |
| BS 3F 118:1980 | Specification for 50 g/m<sup>2</sup> nylon parachute fabric |
| BS 2TA 2:1973 | Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm<sup>2</sup>) |
| BS 3869:1965 | Specification for rigid expanded polyvinyl chloride for thermal insulation purposes and building applications |
| BS 8F 1:1975 | Specification for 140 g linen fabric and serrated edge strip |
| BS 6687:1986 | Specification for electrolytically zinc coated steel flat rolled products |
| BS 690-4:1974 | Asbestos-cement slates and sheets Slates |
| BS 3837:1977 | Specification for expanded polystyrene boards |
| BS 3757:1978 | Specification for rigid PVC sheet |
| BS 3497:1979 | Specification for unimpregnated asbestos cement boards for electrical purposes |
| BS 5F 37:1981 | Specification for 570 g/m<sup>2</sup> and 640 g/m<sup>2</sup> cotton fabrics |
| BS 4F 49:1984 | Specification for cotton webbing for aerospace purposes |
| BS 4396:1976 | Specification. Raw natural rubber |
| BS 2TA 6:1973 | Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm<sup>2</sup>) |
| BS DD 139(1986) : 1986 | SPECIFICATION FOR ZINC-ALUMINIUM ALLOY INGOTS AND CASTINGS |
| BS 2V 37:1968 | Specification for Sitka spruce as finished timber |
| BS 4646:1970 | Specification for high density polythene sheet for general purposes |
| BS 3V 4:1929 | Specification for aircraft material. Ash |
| BS 2871-2:1972 | Specification for copper and copper alloys. Tubes Tubes for general purposes |
| BS 6F 47:1983 | Specification for cotton tape |
| BS F 128:1985 | Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex) |
| BS 3012:1970 | Specification for low and intermediate density polythene sheet for general purposes |
| BS 1204-2:1979 | Synthetic resin adhesives (phenolic and aminoplastic) for wood Specification for close-contact adhesives |
| BS 6431-2:1984 | Ceramic floor and wall tiles Specification for extruded ceramic tiles with a low water absorption (<i>E</i> ≤ 3%). Group A1 |
| BS 3831:1964 | Specification for vitreous enamel finishes for domestic and catering appliances |
| BS 2F 114:1975 | Specification for 80 g cotton madapolam fabric |
| BS 5350-A1:1976 | Methods of test for adhesives. Adherends Adherend preparation |
| BS 3379:2003 | Flexible polyurethane cellular materials for loadbearing applications. Specification |
| BS L 163:1978 | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 6431-6:1984 | Ceramic floor and wall tiles Specification for dust-pressed ceramic tiles with a low water absorption (<i>E</i> ≤ 3%). Group B1 |
| BS 2749:1974 | Specification for linen/cotton union tapes |
| BS 4608:1970 | Specification for copper for electrical purposes. Rolled sheet, strip and foil |
| BS 6431-9:1984 | Ceramic floor and wall tiles Specification for dust-pressed ceramic tiles with a water absorption of <i>E</i> > 10%. Group BIII |
| BS 3B 11:1933 | Specification for aircraft material. Brass bars suitable to be brazed or silver soldered |
| BS 4584:1970 | Specification for metal clad base materials for printed circuits. Methods of test |
| BS 2F 124:1985 | Specification for woven nylon narrow fabrics for aerospace purposes (nominally 940 dtex yarns) |
| BS F 126:1980 | Specification for 35 g/m<sup>2</sup> nylon parachute fabric |
| BS 1230-1:1985 | Gypsum plasterboard Specification for plasterboard excluding materials submitted to secondary operations |
| BS L 167:1978 | Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 2TA 3:1973 | SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 390-540 N/MM[2]) |
| BS 2871-3:1972 | Specification for copper and copper alloys. Tubes Tubes for heat exchangers |
| BS 6F 8:1975 | Specification for mercerized 140 g cotton fabric and serrated edge strip |
| BS 6431-5:1986 | Ceramic floor and wall tiles Specification for extruded ceramic tiles with a water absorption of <i>E</i> > 10%. Group AIII |
| BS 1470:1987 | Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip |
| BS L 166:1978 | Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS DD74(1981) : 1981 | PERFORMANCE REQUIREMENTS AND TEST METHODS FOR NON-STRUCTURAL WOOD ADHESIVES |
£120.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.