• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS 7140:1995

Current
Current

The latest, up-to-date edition.

Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-08-1995

Committees responsible
National foreword
Specification
1. Scope
2. Normative references
3. Definitions
4. General provisions for machine installation and
     operation
5. Test report
Annexes
A. (normative) Woodworking machines - Operating
     conditions for single-blade circular saw benches
B. (normative) Woodworking machines - Operating
     conditions for planing machines
C. (normative) Woodworking machines - Operating
     conditions for thickness planing machines
D. (normative) Woodworking machines - Operating
     conditions for single-spindle moulding machines
E. (normative) Woodworking machines - Operating
     conditions for double-end profiling machines
F. (normative) Woodworking machines - Operating
     conditions for edge-banding machines
G. (normative) Woodworking machines - Operating
     conditions for double-end sizing and edge-banding
     machines
H. (normative) Woodworking machines - Operating
     conditions for two-side and multi-side planing
     machines and moulding machines
J. (normative) Woodworking machines - Operating
     conditions for band sawing machines
K. (normative) Woodworking machines - Operating
     conditions for single-end tenoning machines
L. (normative) Woodworking machines - Operating
     conditions for routing machines
M. (normative) Woodworking machines - Operating
     conditions for double-end trim circular sawing
     machines (nonstroke)
N. (normative) Woodworking machines - Operating
     conditions for single blade stroke circular sawing
     machines for cross-cutting
P. (normative) Woodworking machines - Operating
     conditions for vertical and horizontal panel sizing
     sawing machines
Q. (normative) Woodworking machines - Operating
     conditions for multiblade circular sawing machines
     for ripping
R. (normative) Woodworking machines - Operating
     conditions for sanding machines
S. (normative) Woodworking machines - Operating
     conditions for double edging circular sawing
     machines for rough cutting
T. (normative) Woodworking machines - Operating
     conditions for double blade stroke circular sawing
     machines for cross-cutting
U. (normative) Woodworking machines - Operating
     conditions for double-end tenoning machines for
     tenoning only
V. (informative) Bibliography
Figures
A.1 Measurement surface and microphone array for
     determination of sound power level for single-blade
     circular saw benches
B.1 Measurement surface and microphone array for
     determination of sound power level for planing
C.1 Measurement surface and microphone array for
     determination of sound power for thickness planing
     machines
D.1 Measurement surface and microphone array for
     determination of sound power level for single-
     spindle moulding machines
E.1 Measurement surface and microphone array
     for determination of sound power level for double-
     end profiling machines
F.1 Measurement surface and microphone array for
     determination of sound power level for edge-banding
     machines
G.1 Measurement surface and microphone array for
     determination of sound power level for double-end
     sizing and edge-banding machines
H.1 Measurement surface and microphone array for
     determination of sound power level for two-side
     and multi-side planing machines and moulding machines
J.1 Measurement surface and microphone array for
     determination of sound power level for band sawing
     machines
K.1 Measurement surface and microphone array for
     determination of sound power level for single-end
     tenoning machines
L.1 Measurement surface and microphone array for
     determination of sound power level for routing
     machines
M.1 Measurement surface and microphone array for
     determination of sound power level for double-end
     trim circular sawing machines
N.1 Measurement surface and microphone array for
     determination of sound power level for single blade
     stroke circular sawing machines for cross-cutting
P.1 Measurement surface and microphone array for
     determination of sound power level for horizontal
     panel sizing sawing machines
P.2 Measurement surface and microphone array for
     determination of sound power for vertical panel
     sizing sawing machines
Q.1 Measurement surface and microphone array for
     determination of sound power level for multiblade
     circular sawing machines (for ripping)
R.1 Measurement surface and microphone array for
     determination of sound power level for sanding
     machines without travelling pad
R.2 Measurement surface and microphone array for
     determination of sound power level for sanding
     machines with travelling pad
S.1 Measurement surface and microphone array for
     determination of sound power level for double edging
     circular sawing machines
T.1 Measurement surface and microphone array for
     determination of sound level for double blade stroke
     circular sawing machines for cross-cutting
U.1 Measurement surface and microphone array for
     determination of sound power level for double-end
     tenoning machines (for tenoning only)
Data sheets
A.3 Data sheet for single-blade circular saw benches
B.3 Data sheet for planing machines
C.3 Data sheet for thickness planing machines
D.3 Data sheet for single-spindle moulding machines
E.3 Data sheet for double-end profiling machines
F.3 Data sheet for edge-banding machines
G.3 Data sheet for double-end sizing and edge-banding
     machines
H.3 Data sheet for two-side and multi-side planing
     machines and moulding machines
J.3 Data sheet for band sawing machines
K.3 Data sheet for single-end tenoning machines
L.3 Data sheet for routing machines
M.3 Data sheet for double-end trim circular sawing
     machines (nonstroke)
N.3 Data sheet for single blade stroke circular sawing
     machines for cross-cutting
P.3 Data sheet for vertical and horizontal panel sizing
     sawing machines
Q.3 Data sheet for multiblade circular sawing machines
     for ripping
R.3 Data sheet for sanding machines
S.3 Data sheet for double edging circular sawing machines
     for rough cutting
T.3 Data sheet for double blade stroke circular sawing
     machines for cross-cutting
U.3 Data sheet for double-end tenoning machines for
     tenoning only

Describes the mechanical and acoustical specifications necessary for the determination of airborne noise emitted by woodworking machines. Specifies operating conditions and microphone positions for the measurement of noise emitted by woodworking machines.

This International Standard, together with basic noise emission International Standards, describes the mechanical and acoustical specifications necessary for a reproducible test method for the determination of airborne noise emitted by woodworking machines.

NOTE 1 Acoustic measurement procedures and noise data reporting are given in the basic acoustic standards selected from the ISO 3740 series, ISO 4871 and the ISO 11200 series (see Annex V).

This International Standard specifies operating conditions and microphone positions for the measurement of noise emitted by woodworking machines.

It applies to:

  • — single-blade circular saw benches (Annex A);
  • — planing machines (Annex B);
  • — thickness planing machines (Annex C);
  • — single-spindle moulding machines (Annex D);
  • — double-end profiling machines (Annex E);
  • — edge banding machines (Annex F);
  • — double-end sizing and edge banding machines (Annex G);
  • — two-side and multi-side planing machines and moulding machines (Annex H);
  • — bandsawing machines (Annex J);
  • — single-end tenoning machines (Annex K);
  • — routing machines (Annex L);
  • — double-end trim circular machines (nonstroke) (Annex M);
  • — single-blade stroke circular sawing machines for cross cutting (Annex N);
  • — vertical and horizontal panel sizing sawing machines (Annex P);
  • — multiblade circular sawing machines (for ripping) (Annex Q);
  • — sanding machines (Annex R);
  • — double-edging circular sawing machines (for rough cutting) (Annex S);
  • — double-blade stroke circular sawing machines for cross cutting (Annex T);
  • — double-end tenoning machines (for tenoning only (Annex U).

The existence of special-purpose machines, for which such standard operating conditions cannot be specified, is acknowledged. This International Standard applies to the types of woodworking machines listed above. Additional types will be covered in future editions of this International Standard (ISO 7960).

Committee
MTE/1
DevelopmentNote
Also numbered as ISO 7960 Supersedes 83/76793 DC (09/2005)
DocumentType
Standard
Pages
124
PublisherName
British Standards Institution
Status
Current

ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 3742:1988 Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
BS 4361-0:1990 Woodworking machines Classification of woodworking machines and auxiliary machines used for woodworking
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

View more information
£340.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.