BS 853-1:1990+A3:2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF
05-03-2024
English
30-09-2011
Committees responsible
Foreword
1 Scope
2 Definitions
3 Classification
4 Design pressure and design temperature
5 Materials
6 Welding procedure and welder approval tests
7 Determination of scantlings design
8 Construction
9 Heating batteries
10 Mountings
11 Inspection, testing, marking and manufacturer's
certificate
Annex A - Information supplied by the purchaser
Annex B - Guidance for plant lay out and installation
Publications referred to
Strength and method of construction.
This British Standard specifies the strength and method of construction of calorifiers and storage vessels designed for central heating and hot water supply. It also specifies suitable safety devices and methods of pressure testing. The standard covers units with shells made from copper or carbon steel.
Reference is made to the protection from corrosion of carbon steel shells, by galvanizing, sealed zinc spraying or copper lining.
This standard covers calorifiers heated by steam, water, heat transfer fluid or electricity, but does not cover calorifiers with steam on the outside of the tube battery.
The information that the purchaser is recommended to supply to the manufacturer at the time of enquiry and order is given in Annex A.
NOTE The titles of the publications referred to in this standard are listed on page 36.
| Committee |
E/-
|
| DevelopmentNote |
Renumbers and Supersedes BS 853-1(1996). Supersedes 07/30171878 DC. (10/2011)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| BS 7079:2009 | General introduction to standards for preparation of steel substrates before application of paints and related products |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| BS EN 760:1996 | Welding consumables. Fluxes for submerged arc welding. Classification |
| BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
| BS EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Arc welding |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| BS EN ISO 9453:2014 | Soft solder alloys. Chemical compositions and forms |
| BS EN ISO 2560:2009 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
| BS EN 895:1995 | Destructive tests on welds in metallic materials. Transverse tensile test |
| BS EN ISO 14341:2011 | Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification |
| BS 4439:1969 | Specification for screwed studs for general purposes. Metric series |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN ISO 228-2:2003 | Pipe threads where pressure-tight joints are not made on the threads Verification by means of limit gauges |
| BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| BS EN 14324:2004 | Brazing. Guidance on the application of brazed joints |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| BS 1453:1972 | Specification for filler materials for gas welding |
| BS EN ISO 14171:2010 | Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| ISO 14171:2016 | Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification |
| BS EN 10028-2:2017 | Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties |
| BS ISO 80000-1 : 2009 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN 10241:2000 | Steel threaded pipe fittings |
| BS EN ISO 5173 : 2010 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| BS 1845:1984 | Specification for filler metals for brazing |
| BS EN 1561:2011 | Founding. Grey cast irons |
| BS EN ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| BS 3274:1960 | Specification for tubular heat exchangers for general purposes |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| BS EN ISO 636:2015 | Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification |
| BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS 5624:1978 | Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys |
| BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| BS EN ISO 24373:2009 | Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification |
| ISO 185:2005 | Grey cast irons Classification |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 1320:1997 | Destructive tests on welds in metallic materials. Fracture tests |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads Dimensions, tolerances and designation |
| BS EN ISO 4126-1 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013) |
| BS 10:2009 | Specification for flanges and bolting for pipes, valves and fittings |
| BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
| BS EN 1321:1997 | Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds |
| BS EN 10213 : 2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN 1011-1:2009 | Welding. Recommendations for welding of metallic materials General guidance for arc welding |
| BS EN ISO 17672:2016 | Brazing. Filler metals |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.