BS 882:1992
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
01-06-2004
English
06-03-2002
Foreword
0 Introduction
1 Scope
2 Definitions
3 Sampling and testing
4 Quality requirements
5 Grading
Appendix A Information to be provided by the supplier
Appendix B Special considerations
Appendix C Guidance on the chloride content of aggregates
Tables
Publication(s) referred to
Specifies quality and grading requirements for aggregates obtained by processing natural materials.
Committee |
B/502
|
DevelopmentNote |
Supersedes BS 882(1983) (04/2002) Supersedes 01/105052 DC and 90/12644 DC (04/2002) Superseded by BS EN 12620 but remains current. Supersedes BS 812-1(1975) (11/2003)
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
PD 6682-3:2003 | Aggregates Aggregates for mortar. Guidance on the use of BS EN 13139 |
BS 7533-4:1998 | Pavements constructed with clay, natural stone or concrete pavers Code of practice for the construction of pavements of precast concrete flags or natural stone slabs |
BS 5385-3:1989 | Wall and floor tiling Code of practice for the design and installation of ceramic floor tiles and mosaics |
PD 6682-9:2003 | Aggregates Guidance on the use of European test method standards |
BS 1722-10:1999 | Fences Specification for anti-intruder fences in chain link and welded mesh |
BS 8204-4:1993 | Screeds, bases and in-situ floorings Code of practice for terrazzo wearing surfaces |
BS 5328-1:1997 | Concrete Guide to specifying concrete |
BS 6717-1:1993 | Precast concrete paving blocks Specification for paving blocks |
BS 5328-2:1997 | Concrete Methods for specifying concrete mixes |
BS 8006:1995 | Code of practice for strengthened/reinforced soils and other fills |
BS 5080-2:1986 | Structural fixings in concrete and masonry Method for determination of resistance to loading in shear |
BS 7263-1:1994 | Precast concrete flags, kerbs, channels, edgings and quadrants Specification |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 1217:1997 | Specification for cast stone |
BS 7542:1992 | Method of test for curing compounds for concrete |
BS 1881-120:1983 | Testing concrete Method for determination of the compressive strength of concrete cores |
BS PD6682-1(2009) : 2009 | AGGREGATES - PART 1: AGGREGATES FOR CONCRETE - GUIDANCE ON THE USE OF BS EN 12620 |
BS 5911-2:1982 | Precast concrete pipes, fittings and ancillary products Specification for inspection chambers |
BS 8297:1995 | Code of practice for design and installation of non-loadbearing precast concrete cladding |
BS 5911-103:1994 | Precast concrete pipes, fittings and ancillary products Specification for prestressed non-pressure pipes and fittings with flexible joints |
BS 4975:1990 | Specification for prestressed concrete pressure vessels for nuclear engineering |
PD 6682-1:2003 | Aggregates Aggregates for concrete. Guidance on the use of BS EN 12620 |
BS 1251:1987 | Specification for open-fireplace components |
BS 873-7:1984 | Road traffic signs and internally illuminated bollards Specification for posts and fittings |
BS 1722-1:1999 | Fences Specification for chain link fences |
BS 1881-129:1992 | Testing concrete Method for determination of density of partially compacted semi-dry fresh concrete |
BS 7943:1999 | Guide to the interpretation of petrographical examinations for alkali-silica reactivity |
BS 5385-4:1992 | Wall and floor tiling Code of practice for tiling and mosaics in specific conditions |
BS 5911-3:2002 | Concrete pipes and ancillary concrete products Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002) |
BS 8204-2:1999 | Screeds, bases and in-situ floorings Concrete wearing surfaces. Code of practice |
BS 8081:1989 | Code of practice for ground anchorages |
BS 1881-124:1988 | Testing concrete Methods for analysis of hardened concrete |
BS 5262:1991 | Code of practice for external renderings |
BS 5385-5:1994 | Wall and floor tiling Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings |
BS 812-104:1994 | Testing aggregates Method for qualitative and quantitative petrographic examination of aggregates |
BS 534:1990 | Specification for steel pipes, joints and specials for water and sewage |
BS 5911-230:1994 | Precast concrete pipes, fittings and ancillary products Specification for road gullies and gully cover slabs |
BS 5911-200:1994 | Precast concrete pipes, fittings and ancillary products Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
BS 1722-14:2001 | Fences Specification for open mesh steel panel fences |
BS 8221-2:2000 | Code of practice for cleaning and surface repair of buildings Surface repair of natural stones, brick and terracotta |
BS 5212-3:1990 | Cold applied joint sealant systems for concrete pavements Methods of test |
BS 8500-2:2002 | Concrete. Complementary British Standard to BS EN 206-1 Specification for constituent materials and concrete |
BS 1722-11:2000 | Fences Specification for prefabricated wood panel fences |
BS 5930(1999) : 1999 | CODE OF PRACTICE FOR SITE INVESTIGATIONS |
BS 2499-3:1993 | Hot-applied joint sealant systems for concrete pavements Methods of test |
BS 812-109:1990 | Testing aggregates Methods for determination of moisture content |
BS 8500-1:2002 | Concrete. Complementary British Standard to BS EN 206-1 Method of specifying and guidance for the specifier |
BS 1722-2:2000 | Fences Specification for strained wire and wire mesh netting fences |
BS 5328-3:1990 | Concrete Specification for the procedures to be used in producing and transporting concrete |
BS 8297:2000 | Code of practice for Design and installation of non-loadbearing precast concrete cladding |
BS 8002:1994 | Code of practice for earth retaining structures |
BS 812-123:1999 | Testing aggregates Method for determination of alkali-silica reactivity. Concrete prism method |
BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
BS 3445-1:1992 | Agricultural water troughs and water fittings Specification for water trough bodies, service boxes and water supply system |
BS 7572:1992 | Code of practice for thermally insulated underground piping systems |
BS 4485-4:1996 | Water cooling towers Code of practice for structural design and construction |
BS 8204-3:1993 | Screeds, bases and in-situ floorings Code of practice for polymer modified cementitious wearing surfaces |
BS 8301:1985 | Code of practice for building drainage |
BS 4994:1987 | Specification for design and construction of vessels and tanks in reinforced plastics |
BS 4772:1988 | Specification for ductile iron pipes and fittings |
BS 5400-8:1978 | STEEL CONCRETE AND COMPOSITE BRIDGES - PART 8: RECOMMENDATIONS FOR MATERIALS AND WORKMANSHIP CONCRETE REINFORCEMENT AND PRESTRESSING TENDONS |
BS 5400-7:1978 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 7: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, CONCRETE, REINFORCEMENT AND PRESTRESSING TENDONS |
BS 8007:1987 | CODE OF PRACTICE FOR DESIGN OF CONCRETE STRUCTURES FOR RETAINING AQUEOUS LIQUIDS |
BS 812-103.1:1985 | Testing aggregates. Method for determination of particle size distribution Sieve tests |
BS 812-104:1994 | Testing aggregates Method for qualitative and quantitative petrographic examination of aggregates |
BS 812-106:1985 | Testing aggregates Method for determination of shell content in coarse aggregate |
BS 1370:1979 | Specification for low heat Portland cement |
BS 6610:1996 | Specification for Pozzolanic pulverized-fuel ash cement |
BS 812-118:1988 | Testing aggregates Methods for determination of sulphate content |
BS 6588:1996 | Specification for Portland pulverized-fuel ash cements |
BS 812-112:1990 | Testing aggregates Method for determination of aggregate impact value (AIV) |
BS 812-105.1:1989 | Testing aggregates. Methods for determination of particle shape Flakiness index |
BS 812-111:1990 | Testing aggregates Methods for determination of ten per cent fines value (TFV) |
BS 5328-1:1991 | Concrete Guide to specifying concrete |
BS 4027:1996 | Specification for sulfate-resisting Portland cement |
BS EN 196-21:1992 | Methods of testing cement Determination of the chloride, carbon dioxide and alkali content of cement |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.