BS EN 10056-1:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
22-06-2018
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Dimensions
6 Tolerances on shape and dimensions
7 Material
Annex A (informative) - Comparison of symbols used
in this document with those in EN 1993-1-1
Bibliography
Defines requirements for the nominal dimensions of hot-rolled equal and unequal leg angles.
This European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel.
| Committee |
ISE/103
|
| DevelopmentNote |
Supersedes 94/713529 DC and BS 4848-4(1972). (01/2006) Supersedes 15/30318676 DC. (01/2017)
|
| DocumentType |
Standard
|
| ISBN |
9780539014136
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 10056-1 : 2017 | Identical |
| DIN EN 10056-1:2017-06 | Identical |
| EN 10056-1:2017 | Identical |
| I.S. EN 10056-1:2017 | Identical |
| ONORM EN 10056-1 : 2017 | Identical |
| NBN EN 10056-1 : 1998 | Identical |
| NS EN 10056-1 : 2017 | Identical |
| UNE-EN 10056-1:2017 | Identical |
| SN EN 10056-1 : 2017 | Identical |
| NEN EN 10056-1 : 2017 | Identical |
| UNI EN 10056-1 : 2000 | Identical |
| DIN EN 10056-1:1998-10 | Identical |
| 03/300415 DC : DRAFT JAN 2003 | BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| BS 7905-2:2000 | Lifting equipment for performance, broadcast and similar applications Specification for design and manufacture of aluminium and steel trusses and towers |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-2:2000 | Fences Specification for strained wire and wire mesh netting fences |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS 1722-14:2001 | Fences Specification for open mesh steel panel fences |
| BS 1722-12:2006 | Fences Specification for steel palisade fences |
| DEFSTAN 81-086/5(2022):2022 | Metal Fittings for Wooden Containers |
| DEFSTAN 81-86/3(2007) : 2007 | METAL FITTINGS FOR WOODEN CONTAINERS |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| DEFSTAN 81-86/2(2000) : 2000 CORR 2000 | METAL FITTINGS FOR WOODEN CONTAINERS |
| BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| 16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
| BS 5400-3:2000 | Steel, concrete and composite bridges Code of practice for design of steel bridges |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| BS 1722-10:1999 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-1:1999 | Fences Specification for chain link fences |
| EN 10079:2007 | Definition of steel products |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10056-2:1993 | Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.