BS EN 12209:2016
Current
The latest, up-to-date edition.
Building hardware. Mechanically operated locks and locking plates. Requirements and test methods
Hardcopy , PDF
English
30-06-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test, assessment and sampling methods
6 Assessment and verification of constancy of
performance - AVCP
7 Classification
8 Marking, labelling and packaging
Annex A (normative) - Locks and locking plates for use
on fire resisting and/or smoke control doorset
Annex B (normative) - Test sampling and sequencing for
locks and latches
Annex C (informative) - Product information
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation (305/2011)
Bibliography
Defines requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: a) for use in doors in buildings; b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: for use in doors in buildings; for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and for use on locked fire doors to maintain the fire integrity of the door assembly. This European Standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades. This European Standard does not specify Multipoint locks or their locking plates which are specified by prEN15685 . This European Standard specifies the dimensions and properties required for security. Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control doorset assemblies is beyond the scope of this European Standard.
| Committee |
B/538/4
|
| DevelopmentNote |
Supersedes BS 5872(1980), 95/108835 DC & 01/103190 DC. (12/2003) Supersedes 11/30204176 DC. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 12209 : 2016 | Identical |
| DIN EN 12209:2016-10 | Identical |
| UNI EN 12209 : 2005 | Identical |
| UNE-EN 12209:2017 | Identical |
| NBN EN 12209 : 2016 | Identical |
| SN EN 12209 : 2016 | Identical |
| NS EN 12209 : 2003 | Identical |
| EN 12209:2016 | Identical |
| I.S. EN 12209:2016 | Identical |
| NEN EN 12209 : 2016 | Identical |
| DIN EN 12209:2004-03 | Identical |
| 16/30338194 DC : 0 | BS 10621 - LOCK ASSEMBLIES IN WHICH THE OPERATING MODE CAN BE SWITCHED BETWEEN THE NORMAL BS 8621 OPERATING MODE AND A SECURE MODE IN WHICH NO EGRESS IS POSSIBLE |
| 13/30277228 DC : 0 | BS 8607 - MECHANICALLY OPERATED PUSH-BUTTON LOCKSETS - REQUIREMENTS AND TEST METHODS |
| BS 10621(2007) : 2007 | THIEF RESISTANT DUAL-MODE LOCK ASSEMBLY |
| 16/30338192 DC : 0 | BS 8621 - LOCK ASSEMBLIES OPERATED BY KEY FROM THE OUTSIDE OF THE DOOR AND BY HANDLE OR THUMB TURN FROM THE INSIDE OF THE DOOR |
| BS 7273-4:2015 | Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors |
| BS 8214:2016 | Timber-based fire door assemblies. Code of practice |
| BS 3621(2007) : 2007 | THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS |
| BS 8214:2008 | Code of practice for fire door assemblies |
| BS 10621:2017 | Lock assemblies in which the operating mode can be switched between the normal BS 8621 operating mode and a secure mode in which no egress is possible |
| BS 8621(2007) : 2007 | THIEF RESISTANT LOCK ASSEMBLY - KEYLESS EGRESS |
| BS 3621:2004 | Thief resistant lock assembly. Key egress |
| BS 8607(2014) : 2014 | MECHANICALLY OPERATED PUSH BUTTON LOCKSETS - REQUIREMENTS AND TEST METHODS |
| 07/19977411 DC : DRAFT FEB 2007 | BS 8214 - CODE OF PRACTICE FOR FIRE DOOR ASSEMBLIES |
| 06/30158054 DC : DRAFT NOV 2006 | BS 3621 AMD 1 - THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS |
| 06/30133094 DC : DRAFT OCT 2006 | BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS |
| BS 8300(2009) : 2009 | DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE |
| BS 6100-0:2010 | Building and civil engineering. Vocabulary Introduction and index |
| BS 6100-6:2008 | Building and civil engineering. Vocabulary Construction parts |
| 16/30332500 DC : 0 | BS 8214 - TIMBER-BASED FIRE DOOR ASSEMBLIES - CODE OF PRACTICE |
| BS 7273-4:2007 | Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors |
| 17/30335834 DC : 0 | BS 8300-2 - DESIGN OF AN ACCESSIBLE AND INCLUSIVE BUILT ENVIRONMENT - PART 2: BUILDINGS - CODE OF PRACTICE |
| BS PAS 10621(2011) : 2011 | MULTIPOINT LOCKING ASSEMBLIES - DUAL MODE EGRESS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| 04/30108696 DC : DRAFT APR 2004 | BS 8621 - THIEF RESISTANT LOCK AND LATCH ASSEMBLIES THAT ONLY ALLOW KEYLESS EGRESS |
| 16/30338190 DC : 0 | BS 3621 - LOCK ASSEMBLIES OPERATED BY KEY FROM BOTH THE INSIDE AND OUTSIDE OF THE DOOR |
| 07/30167591 DC : 0 | BS 10621 - THIEF RESISTANT DUAL-MODE LOCK ASSEMBLIES |
| BS PAS 8621(2011) : 2011 | MULTIPOINT LOCKING ASSEMBLIES - KEYLESS EGRESS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| 15/30288999 DC : 0 | BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS |
| 04/30108691 DC : DRAFT APR 2004 | BS 3621 - THIEF RESISTANT LOCK AND LATCH ASSEMBLIES THAT ONLY ALLOW EGRESS USING A KEY |
| BS PAS 3621(2011) : 2011 | MULTIPOINT LOCKING ASSEMBLIES - KEYED EGRESS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS 8621:2004 | Thief resistant lock assembly. Keyless egress |
| 06/30158068 DC : DRAFT NOV 2006 | BS 8621 AMD 1 - THIEF RESISTANT LOCK ASSEMBLY - KEYLESS EGRESS |
| BS 3621:2017 | Lock assemblies operated by key from both the inside and outside of the door |
| BS 8621:2017 | Lock assemblies operated by key from the outside of the door and by handle or thumb turn from the inside of the door |
| EN 1906:2012 | Building hardware - Lever handles and knob furniture - Requirements and test methods |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| EN 1670:2007/AC:2008 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| EN 1634-3:2004/AC:2006 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES |
| EN 1303:2015 | Building hardware - Cylinders for locks - Requirements and test methods |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 1634-2 : 2008 | Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 16035:2012 | Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| ISO 10899:1996 | High-speed steel two-flute twist drills — Technical specifications |
| EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.