BS EN 13438:2013
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
30-09-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Substrate material
5 Coating powder
6 Application
7 Certificate of conformity
Annex A (normative) - Methods of test for coating powders
Annex B (informative) - Guidance on cleaning and pretreatment
processes
Annex C (informative) - Guidelines on the powder coating
process
Annex D (normative) - Methods of test for powder coatings
Annex E (informative) - Guidelines on the care and protection
of powder coated hot dip galvanized or
sherardised steel components
Bibliography
Describes performance requirements for organic coating powders and powder organic coatings as applied to finished articles (hot dip galvanised or sherardised steel products) for construction purposes.
This European Standard specifies performance requirements for organic coating powders and powder organic coatings as applied to finished articles (hot dip galvanised or sherardised steel products) for construction purposes. Hot dip galvanised steel products can be articles that have been batch hot dip galvanised (hot dip galvanised after fabrication) or articles consisting of continuously hot dip galvanised sheet which is then subsequently fabricated.
This European Standard does not set out any performance requirements for the powder coating process itself. Guidance on cleaning and pretreatment of the hot dip galvanised or sherardised steel products prior to powder coating is provided.
This European Standard does not apply to articles with zinc-aluminium coatings or aluminium-zinc coatings, or to continuously hot dip galvanised wire. This standard does not apply to organic coating powders and powder organic coatings as applied to hot dip galvanised or sherardised steel products (i.e. duplex coated articles) for which there are specific standards, which might include additional requirements or requirements which are different from those of this standard.
| Committee |
STI/21
|
| DevelopmentNote |
Supersedes BS 6497(1984). Supersedes 98/403085 DC. (01/2006) Supersedes 12/30238456 DC. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 13438:2007 | Identical |
| EN 13438:2013 | Identical |
| I.S. EN 13438:2013 | Identical |
| NEN EN 13438 : 2013 | Identical |
| SN EN 13438 : 2013 | Identical |
| NF EN 13438 : 2013 | Identical |
| NS EN 13438 : 2013 | Identical |
| DIN EN 13438:2013-12 | Identical |
| NBN EN 13438 : 2013 | Identical |
| UNI EN 13438 : 2013 | Identical |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| 09/30166898 DC : 0 | BS 559 - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF SIGN INSTALLATIONS |
| BS 559:2009 | Specification for the design and construction of signs for publicity, decorative and general purposes |
| EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| EN ISO 11664-4:2011 | Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 14713-3:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017) |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 8130-9:1999 | Coating powders - Part 9: Sampling (ISO 8130-9:1992) |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 13811 : 2003 | SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| EN ISO 11341:2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
| EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
| ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| ISO 8130-9:1992 | Coating powders Part 9: Sampling |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| ISO 2813:2014 | Paints and varnishes Determination of gloss value at 20, 60 and 85 |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| ISO 14713-3:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 3: Sherardizing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.