BS EN 13602:2013
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
31-07-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Annex A (informative) - Characteristics of coppers for
electrical purposes
Bibliography
Defines the composition, property requirements including electrical properties, and dimensional tolerances for drawn round copper wire from 0,04 mm up to and including 5,0 mm for the manufacture of electrical conductors intended for the production of bare and insulated cables and flexible cords.
This European Standard specifies the composition, property requirements including electrical properties, and dimensional tolerances for drawn round copper wire from 0,04mm up to and including 5,0mm for the manufacture of electrical conductors intended for the production of bare and insulated cables and flexible cords.
This standard covers plain or tinned, single or multiline, annealed or hard drawn wire. It does not include wire for enamelling (winding wire, magnet wire), for electronic application and for contact wire for electric traction.
The sampling procedures, the test methods for verification of conformity to the requirements of this standard and the delivery conditions are also specified.
NOTE Due to the thermal and/or mechanical treatment involved in cablemaking processes, the properties of conductors in the final cable or cord differ from those of the original wire supplied. Requirements for conductors taken from cable or cord are given in appropriate cable standards.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes 99/710682 DC and BS 4109(1970). (10/2002) Supersedes 11/30240459 DC. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 13602 : 2013 | Identical |
| NS EN 13602 : 2013 | Identical |
| SN EN 13602 : 2013 | Identical |
| NF EN 13602 : 2013 | Identical |
| DIN EN 13602:2013-09 | Identical |
| I.S. EN 13602:2013 | Identical |
| UNE-EN 13602:2014 | Identical |
| UNI EN 13602 : 2013 | Identical |
| EN 13602:2013 | Identical |
| NEN EN 13602 : 2013 | Identical |
| 11/30214068 DC : 0 | BS 7870-3.40 - LV AND MV POLYMERIC INSULATED CABLES FOR USE BY DISTRIBUTION AND GENERATION UTILITIES - PART 3: SPECIFICATION FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0.6/1 KV - SECTION 3.40: XLPE INSULATED, COPPER WIRE WAVEFORM CONCENTRIC CABLES WITH SOLID ALUMINIUM CONDUCTORS |
| DEFSTAN 61-12(PT9)/5(2008) : 2008 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 9: CABLES AND WIRES ELECTRICAL FOR CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS |
| DEFSTAN 61-12(PT20)/1(1980) : 1980 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 20: BRAIDS, WIRE |
| 11/30214071 DC : 0 | BS 7870-3.50 - LV AND MV POLYMERIC INSULATED CABLES FOR USE BY DISTRIBUTION AND GENERATION UTILITIES - PART 3: SPECIFICATION FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0.6/1 KV - SECTION 3.50: XLPE INSULATED, COPPER WIRE WAVEFORM OR HELICAL CONCENTRIC CABLES WITH SOLID ALUMINIUM CONDUCTORS, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE |
| DEFSTAN 02-526/2(2008) : 2008 | REQUIREMENTS FOR CABLES ELECTRIC, ELASTOMERIC, LIMITED FIRE HAZARD SHEATHED FOR GENERAL SERVICES |
| 05/30126924 DC : DRAFT MAY 2005 | BS 7870-3.50 - LV AND MV POLYMERIC INSULATED CABLES FOR USE BY DISTRIBUTION AND GENERATION UTILITIES - PART 3: SPECIFICATION FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0.6/1 KV - SECTION 3.50: XLPE INSULATED, COPPER WIRE WAVEFORM OR HELICAL CONCENTRIC CABLES WITH SOLID ALUMINIUM CONDUCTORS, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE |
| BS 2000-306(2011) : 2011 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 306: DETERMINATION OF OXIDATION STABILITY OF STRAIGHT MINERAL OIL |
| BS 7870-3.50:2005 | LV and MV polymeric insulated cables for use by distribution and generation utilities Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire. (Implementation of HD 603) |
| DEFSTAN 61-12(PT14)/2(2008) : 2008 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 14: WIRES, ELECTRICAL - (ENAMEL INSULATED ROUND WINDING WIRES AND NON-INSULATED TINNED COPPER WIRES) |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 13603:2013 | Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| ISO 197-1:1983 | Copper and copper alloys Terms and definitions Part 1: Materials |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys Code of designation Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| IEC 60468:1974 | Method of measurement of resistivity of metallic materials |
| ISO 197-3:1983 | Copper and copper alloys Terms and definitions Part 3: Wrought products |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 610:1995 | Tin and tin alloys - Ingot tin |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| ISO 4739:1985 | Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
| EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| ISO 7801:1984 | Metallic materials Wire Reverse bend test |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.