• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 14917 : 2009

Current
Current

The latest, up-to-date edition.

METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials
6 Design
7 Manufacturing
8 Testing, inspection and documentation
9 Marking and labelling
10 Handling and installation
Annex A (informative) - Categories of expansion
        joints
Annex B (normative) - Specification for materials
        1.4828, 1.4876, 2.4360 and 2.4858
Annex C (informative) - Incorporation of expansion
        joints into pressure vessels and piping
Annex D (informative) - Calculation methods for
        systems of pipes containing expansion joints
Annex E (informative) - Overview of the design of
        expansion bellows
Annex F (informative) - Procedure for setting-up
        a design fatigue curve
Annex G (informative) - Polynomial approximations for
        coefficients C[p], C[f], C[d]
Annex H (informative) - Required design data and
        information
Annex I (informative) - Expansion joints risk analyses
Annex J (informative) - Material properties and material
        groups
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 97/23/EC
Bibliography

Defines the requirements for design, manufacture and installation of metal bellows expansion joints for pressure applications, i.e. maximum allowable pressure greater than 0,5 bar.

Committee
GSE/42
DevelopmentNote
Supersedes 04/30118252 DC. (04/2009) 2009 Edition Re-Issued in April 2012 & incorporates AMD 1 2012. Supersedes 11/30236583 DC. (04/2012)
DocumentType
Standard
Pages
210
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
EN 14917:2009+A1:2012 Identical

BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2009) : 2009 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2018) : 2018 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2012) : 2012 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS

ISO 9445:2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
ISO 15348:2002 Pipework Metal bellows expansion joints General
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10002-5:1991 Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
ISO 15610:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
EN 1593:1999/A1:2003 NON-DESTRUCTIVE TESTING - LEAK TESTING - BUBBLE EMISSION TECHNIQUES
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary
EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ISO 6208:1992 Nickel and nickel alloy plate, sheet and strip
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
VDTUEV 432/1 WERKSTOFFBLAETTER : 2017 SUPP 2017 WERKSTOFFBLAETTER - HOCHKORROSIONSBESTAENDIGE NICKELBASIS-LEGIERUNG NICR 21 MO; WERKSTOFF-NR. 2.4858 BLECH, BAND
EN 10095:1999 Heat resisting steels and nickel alloys
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
EN 10272:2016 Stainless steel bars for pressure purposes
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN 1779:1999/A1:2003 NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION
EN 13185:2001/A1:2003 NON-DESTRUCTIVE TESTING - LEAK TESTING - TRACER GAS METHOD
EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 1289:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10204:2004 Metallic products - Types of inspection documents
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 13184:2001/A1:2003 NON-DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 1712:1997/A2:2004 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
EN 1713:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - CHARACTERIZATION OF INDICATIONS IN WELDS
EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
EN 12517-1:2006 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN ISO 9445:2006 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002)
EN 1291:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING OF WELDS - ACCEPTANCE LEVELS
EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
EN 1290:1998/A2:2003 NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS
EN 764-3:2002 Pressure equipment - Part 3: Definition of parties involved
VDTUEV 263 WERKSTOFFBLAETTER : 2017 SUPP 2017 WERKSTOFFBLAETTER - NICKEL-KUPFER-LEGIERUNG NICU 30 FE WERKSTOFF-NR. 2.4360 BLECH, NAHTLOSES ROHR, SCHMIEDESTUECK UND STANGE
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
£350.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.