BS EN 1559-1:2011
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
30-04-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (normative) - Mandatory and/or optional information
checklist
Annex B (informative) - Significant technical changes between
this European Standard and the previous edition
Bibliography
Defines the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.
This part of EN1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.
This part of EN1559 is not applicable to metallic castings for further reprocessing such as forging ingots and continuously cast billets and blooms.
NOTE1 Technical delivery conditions for copper alloy castings are specified in EN1982.
NOTE2 Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN1559-2 for cast steel; EN1559-3 for cast iron; EN1559-4 for cast aluminium; EN1559-5 for cast magnesium; EN1559-6 for cast zinc.
| Committee |
ISE/111
|
| DevelopmentNote |
Together with BS EN 1559-4, BS EN 1676 & BS EN 1706 it supersedes BS 1490(1988) (08/1999) Supersedes 94/341514 DC (05/2004) Supersedes 09/30200834 DC. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1559-1:2011 | Identical |
| NEN EN 1559-1 : 2011 | Identical |
| I.S. EN 1559-1:2011 | Identical |
| EN 1559-1:2011 | Identical |
| NBN EN 1559-1 : 2011 | Identical |
| SN EN 1559-1 : 2011 | Identical |
| UNI EN 1559-1 : 2011 | Identical |
| NS EN 1559-1 : 2011 | Identical |
| NF EN 1559-1 : 2011 | Identical |
| DIN EN 1559-1:2011-05 | Identical |
| DEFSTAN 22-94/1(2007) : 2007 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 22-94/2(2008) : 2008 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| 05/30135982 DC : DRAFT JUL 2005 | BS 715 - SPECIFICATION FOR METAL FLUE BOXES FOR GAS FIRED APPLIANCES NOT EXCEEDING 20 KW |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| BS 7926:1998 | Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel |
| DEFSTAN 22-94/3(2011) : 2011 | SPECIFICATION FOR THE REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| BS 715:2005 | Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-868/2(2011) : 2011 | REQUIREMENTS FOR THE DESIGN OF CENTRE FED HOSE REELS |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN ISO 8062-1 : 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| EN 1559-6:1998 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1369:2012 | Founding - Magnetic particle testing |
| EN 12892:2000 | Founding - Equipment for the production of lost patterns for the lost foam casting process |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| EN 12883:2000 | Founding - Equipment for the production of lost patterns for the lost wax casting process |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.