• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 15827:2011

Current
Current

The latest, up-to-date edition.

Railway applications. Requirements for bogies and running gears
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-04-2011

This European Standard consolidates all the separate requirements specified in rolling stock TSIs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope.

There are many European Standards that specify the design requirements and associated processes of bogie and running gear components and sub-assemblies. There are also European standards that specify vehicle performance and validation requirements that depend directly on the bogies or running gear. The objective of this standard is to bring all these separate design criteria together. This is accomplished by specifying the design and validation processes to be used for bogies and running gear with particular focus on the two key disciplines of dynamic behaviour and structural integrity. To ensure that safe operation can be continued throughout the product life the definition of a maintenance plan is also required.

This European Standard is applicable to bogies and running gear intended for vehicles that will operate under the Interoperability Directives on designated TEN routes. The requirements, however, can be used in other applications at the discretion of the interested parties. It specifies the requirements to achieve a satisfactory design of bogie or running gear and to validate the design against the relevant performance and safety criteria. Technical requirements are specified directly or by making reference to the relevant European standards and include the nature and content of an auditable record that should be produced of the design and validation processes.

The requirements address only the design and validation of bogies and running gear. No requirements are set for other systems components that are attached to the bogies or running gear, except to establish that a satisfactory interface has been provided.

NOTE Specifications that relate to bogies and running gear can only be considered in the context of a specific vehicle application. Therefore the performance, both safety and otherwise, can relate only to the bogies and running gear as part of a vehicle configuration and not to the individual elements of the bogies or running gear.

Committee
RAE/3
DocumentType
Standard
Pages
84
PublisherName
British Standards Institution
Status
Current

Standards Relationship
EN 15827:2011 Identical

EN 15687:2010 Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
EN 15437-1:2009 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
PREN 15437-2 : DRAFT 2010 RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - PERFORMANCE REQUIREMENTS - PART 2: ONBOARD SYSTEMS FOR TEMPERATURE MONITORING
EN 15313:2016 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
UIC 432 : 12ED 2008 WAGONS - RUNNING SPEEDS - TECHNICAL CONDITIONS TO BE OBSERVED
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 15085-1:2007+A1:2013 Railway applications - Welding of railway vehicles and components - Part 1: General
PREN 15839 : DRAFT 2012 RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - FREIGHT WAGONS - TESTING OF RUNNING SAFETY UNDER LONGITUDINAL COMPRESSIVE FORCES
DIN 25201-1:2015-12 DESIGN GUIDE FOR RAILWAY VEHICLES AND THEIR COMPONENTS - BOLTED JOINTS - PART 1: CLASSIFICATION OF BOLTED JOINTS
EN 13715:2006+A1:2010 Railway applications - Wheelsets and bogies - Wheels - Tread profile
DIN 25201-2:2015-12 DESIGN GUIDE FOR RAILWAY VEHICLES AND THEIR COMPONENTS - BOLTED JOINTS - PART 2: DESIGN - MECHANICAL APPLICATIONS
EN 14817:2006 Railway applications - Suspension components - Air spring control elements
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 60721-3-5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
DIN 7190:2001-02 INTERFERENCE FITS - CALCULATION AND DESIGN RULES
EN 13848-1:2003+A1:2008 Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
2008/57/EC : 2008 AMD 5 2014 DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE)
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 12299:2009 Railway applications - Ride comfort for passengers - Measurement and evaluation
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
EN 12081:2017 Railway applications - Axleboxes - Lubricating greases
EN 15085-5:2007 Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
NFF 32 101 : 1978 RAILWAY TRANSPORT EQUIPMENT - TWO AXLE CARRYING BOGIE FRAMES - DETERMINATION OF REFERENCE ELEMENTS - GEOMETRICAL CHECKS
EN ISO 3095:2013 Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
PREN 15892 : DRAFT 2009 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS
EN 14535-1:2005+A1:2011 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 12082:2017 Railway applications - Axleboxes - Performance testing
NFE 22 622 : 1988 MECHANICAL TRANSMISSIONS - PRESSED-ON ASSEMBLIES ON CONICAL BEARINGS - FUNCTION, REALIZATION, CALCULATION
EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge
NFE 25 030-1 : 2014 FASTENERS - THREADED CONNECTIONS WITH ISO METRIC THREAD - PART 1: DESIGN RULES FOR TENSILE LOADED BOLTED JOINTS - SIMPLIFIED PROCEDURE - FIXATIONS
EN 13803-2:2006+A1:2009 Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature
EN 15273-1:2013+A1:2016/AC:2017 RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK
EN 15227:2008+A1:2010 Railway applications - Crashworthiness requirements for railway vehicle bodies
EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
EN 13104:2009+A2:2012 Railway applications - Wheelsets and bogies - Powered axles - Design method
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
EN 13597:2003 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
EN 15528:2015 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
EN 15302:2008+A1:2010 Railway applications - Method for determining the equivalent conicity
EN 13803-1:2010 Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line
PREN 14535-2 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
ISO 9001:2015 Quality management systems — Requirements
EN 13298:2003 Railway applications - Suspension components - Helical suspension springs, steel
NFE 90 401-2 : 2001 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: GENERAL REQUIREMENTS
EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
EN 13802:2013 Railway applications - Suspension components - Hydraulic dampers
EN 15663:2017 Railway applications - Vehicle reference masses
EN 13260:2009+A1:2010 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
ISO 3095:2013 Acoustics Railway applications Measurement of noise emitted by railbound vehicles
UIC 518 : 4ED 2009 TESTING AND APPROVAL OF RAILWAY VEHICLES FROM THE POINT OF VIEW OF THEIR DYNAMIC BEHAVIOUR - SAFETY - TRACK FATIGUE - RIDE QUALITY
EN 1993-1-9:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE
NFE 22 620 : 1980 PRESSED-ON ASSEMBLIES - DIMENSIONS, TOLERANCES AND SURFACE CONDITION OF USUAL ASSEMBLIES
EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
EN 15085-2:2007 Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
NFE 22 621 : 2015 MECHANICAL TRANSMISSIONS - PRESSED-ON ASSEMBLIES ON CYLINDRICAL SHAFT - FUNCTION, REALISATION, CALCULATION
EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
EN 15085-3:2007/AC:2009 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
EN 1999-1-3:2007/A1:2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE
EN 15686:2010 Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements

View more information
£280.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.