• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 1654:1998

Current
Current

The latest, up-to-date edition.

Copper and copper alloys. Strip for springs and connectors
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

27-03-2003

Foreword
1 Scope
2 Normative references
3 Definitions
4 Designations
   4.1 Material
   4.2 Material condition
   4.3 Product
5 Ordering information
6 Requirements
   6.1 Composition
   6.2 Mechanical properties
   6.3 Dimensions and tolerances
   6.4 Form tolerances
   6.5 Surface properties
7 Sampling
   7.1 General
   7.2 Analysis
   7.3 Mechanical and other tests
8 Test methods
   8.1 Analysis
   8.2 Hardness test
   8.3 Bend test
   8.4 Tensile test
   8.5 Spring bending test
   8.6 Coil set
   8.7 Transverse cross bow q
   8.8 Retests
   8.9 Rounding of results
9 Declaration of conformity and inspection documentation
   9.1 Declaration of conformity
   9.2 Inspection documentation
10 Marking, packaging, labelling
Annex A (informative) Properties for guidance
Annex B (informative) Bibliography

Defines the composition, property requirements and tolerances on dimensions and form for copper alloy strip for fabricating springs and connectors, having thicknesses from 0.1 mm and not exceeding 1.0 mm, with widths not exceeding 350 mm.

This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper alloy strip intended for the fabrication of springs and connectors, with thicknesses from 0,1 mm up to and including 1,0 mm and with widths up to and including 350 mm.

The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.

Committee
NFE/34
DevelopmentNote
Together with BS EN 1652, BS EN 1653 and BS EN 1172 supersedes BS 2870(1980). Supersedes 94/711998 DC (01/2003)
DocumentType
Standard
Pages
16
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 3B 29:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)
BS 2B 29:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard and precipitation treated)
DEFSTAN 02-329/2(2005) : 2005 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-329/3(2010) : 2010 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-329/4(2015) : 2015 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 07-207/2(2009) : 2009 REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE)
BS 3B 30:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)
13/30260276 DC : 0 BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
09/30181207 DC : 0 BS 3B 31 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY STRIP AND FOIL (SOLUTION TREATED, COLD ROLLED: FULL HARD AND PRECIPITATION TREATED)
BS 2B 30:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard and precipitation treated)
BS SP134-SP138(1968) : 1968 AEROSPACE SERIES - SPECIFICATION FOR COPPER BERYLLIUM CRINKLE WASHERS
BS 2B 32:2001 Copper-beryllium alloy rods, sections and parts (solution treated and precipitation treated)
BS 2B 28:2001 Copper-beryllium alloy strip, foil and parts (solution treated and precipitation treated)
BS 5642-2(1983) : 1983 SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
09/30181205 DC : 0 BS 3B 30 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY STRIP AND FOIL (SOLUTION TREATED, COLD ROLLED: HALF HARD AND PRECIPITATION TREATED)
BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
09/30181201 DC : 0 BS 3B 28 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY STRIP AND FOIL (SOLUTION TREATED AND PRECIPITATION TREATED)
12/30266661 DC : DRAFT JULY 2012 BS SP 134-138 AMD1 - SPECIFICATION FOR COPPER BERYLLIUM CRINKLE WASHERS
09/30181203 DC : 0 BS 3B 29 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY STRIP AND FOIL (SOLUTION TREATED, COLD ROLLED: QUARTER HARD AND PRECIPITATION TREATED)
BS 3B 31:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)
DEFSTAN 22-64/3(2004) : 2004 SPECIFICATION FOR HYDROMETERS (METAL TYPE) NS CAT NOS 0253/2176, 220-579 AND 220-5800
DEFSTAN 22-64/2(2001) : 2001 SPECIFICATION FOR HYDROMETERS (METAL TYPE) NS CAT NOS O550/2176, O550-99-220-5799 AND O550-99-220-5800
BS 2B 31:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard and precipitation treated)

EN 1655:1997 Copper and copper alloys - Declarations of conformity
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 1412:2016 Copper and copper alloys - European numbering system
ISO 1190-1:1982 Copper and copper alloys Code of designation Part 1: Designation of materials
ISO 6507-2:2005 Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines
ISO 1811-2:1988 Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
ISO 197-3:1983 Copper and copper alloys Terms and definitions Part 3: Wrought products
ISO 6507-3:2005 Metallic materials Vickers hardness test Part 3: Calibration of reference blocks
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
EN 1173:2008 Copper and copper alloys - Material condition designation
ISO 31-0:1992 Quantities and units Part 0: General principles
ISO 7438:2016 Metallic materials Bend test
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements

View more information
£232.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.