BS EN 1999-1-1 : 2007
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2007
Foreword
1 General
2 Basis of design
3 Materials
4 Durability
5 Structural analysis
6 Ultimate limit states for members
7 Serviceability Limit States
8 Design of joints
Annex A [normative] - Execution classes
Annex B [normative] - Equivalent T-stub in tension
Annex C [informative] - Materials selection
Annex D [informative] - Corrosion and surface protection
Annex E [informative] - Analytical models for stress
strain relationship
Annex F [informative] - Behaviour of cross-sections beyond
the elastic limit
Annex G [informative] - Rotation capacity
Annex H [informative] - Plastic hinge method for continuous
beams
Annex I [informative] - Lateral torsional buckling of beams
and torsional or torsional-flexural buckling of
compressed members
Annex J [informative] - Properties of cross sections
Annex K [informative] - Shear lag effects in member design
Annex L [informative] - Classification of joints
Annex M [informative] - Adhesive bonded connections
Bibliography
Provides basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys.
Committee |
B/525/9
|
DevelopmentNote |
Supersedes DD ENV 1999-1.1. (08/2007) National Annex of this document is also available. See BS EN 1999-1-1 NA. (11/2008) Supersedes 08/30189531 DC. (03/2010) Supersedes BS 8118-1(1991) & BS 8118-2(1991). (04/2010) Also available as part of BS KIT 213. (08/2010) 2007 Edition Re-Issued in February 2014 & incorporates AMD 2 2013. (02/2014)
|
DocumentType |
Standard
|
Pages |
212
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 1999-1-1:2007 | Identical |
NF EN 1999-1-1 : 2007 AMD 2 2014 | Identical |
UNI EN 1999-1-1 : 2014 | Identical |
NEN EN 1999-1-1 : 2011 | Identical |
EN 1999-1-1:2007/A2:2013 | Identical |
NBN EN 1999-1-1 : 2007 AMD 2 2014 | Identical |
SN EN 1999-1-1 : 2007 AMD 2 2013 | Identical |
NS EN 1999-1-1 : 2007 AMD 2 2013 | Identical |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
BS 6037-1:2017 | Planning, design, installation and use of permanently installed access equipment. Code of practice Suspended access equipment |
08/30153319 DC : 0 | BS EN 1999-1-2:2007/NA - UK NATIONAL ANNEX TO EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
08/30153340 DC : 0 | BS EN 1999-1-5/NA - UK NATIONAL ANNEX TO EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
13/30274184 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
17/30342093 DC : 0 | BS 6037-1 - PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - CODE OF PRACTICE - PART 1: SUSPENDED ACCESS EQUIPMENT |
BS EN ISO 19901-3:2014 | Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure |
BS 1139-6:2014 | Metal scaffolding Prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems. Specification |
BS EN 1999-1-2 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
14/30300516 DC : 0 | BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
12/30177610 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
BS EN 1999-1-1 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
BS 5918:2015 | Solar heating systems for domestic hot water. Code of practice for design and installation |
08/30153335 DC : 0 | BS EN 1999-1-4:2007/NA - UK NATIONAL ANNEX TO EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
I.S. EN ISO 19901-3:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014) |
PD 6702-1:2009 | Structural use of aluminium Recommendations for the design of aluminium structures to BS EN 1999 |
CSA ISO 19901-3 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
BS EN 1999-1-4 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
BS EN 1999-1-5 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
EN ISO 19901-3:2014 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) |
14/30286613 DC : 0 | BS 1139-6 - METAL SCAFFOLDING - PART 6: PREFABRICATED TOWER SCAFFOLDS OUTSIDE THE SCOPE OF BS EN 1004, BUT UTILIZING COMPONENTS FROM SUCH SYSTEMS - SPECIFICATION |
PD 6705-3:2009 | Structural use of steel and aluminium Recommendations for the execution of aluminium structures to BS EN 1090-3 |
BS EN 1999-1-3 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 754-3:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 755-5:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 1011-4:2000/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
ISO 11003-2:2001 | Adhesives Determination of shear behaviour of structural adhesives Part 2: Tensile test method using thick adherends |
EN 755-3:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN ISO 1302 : 2002 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002) |
EN 1592-1:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
EN 1999-1-4:2007/A1:2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
EN 755-4:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
EN 13068-2:1999 | Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices |
ISO 18273:2015 | Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification |
EN 586-3:2001 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 1999-1-5:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
EN 754-6:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 755-6:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
PREN 1090-1 : DRAFT 2004 | STEEL AND ALUMINIUM STRUCTURAL COMPONENTS - GENERAL DELIVERY CONDITIONS |
EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 1592-4:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
EN 754-5:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
EN ISO 18273:2015 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015) |
EN 586-1:1997 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN 754-8:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
ISO 8930:1987 | General principles on reliability for structures List of equivalent terms |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
ISO 11003-1:2001 | Adhesives Determination of shear behaviour of structural adhesives Part 1: Torsion test method using butt-bonded hollow cylinders |
EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
EN 1592-2:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 28839 : 1991 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986) |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
EN 1592-3:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
EN 754-4:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN 1999-1-3:2007/A1:2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 13068-1:1999 | Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.