BS EN 300:2006
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
31-08-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of boards
5 General requirements for all OSB types
6 Requirement values
7 Requirements for non load-bearing boards, general purpose
boards and boards for interior fitments for use in dry
conditions (Type OSB/1)
8 Requirements for load-bearing boards for use in dry
conditions (Type OSB/2)
9 Requirements for load-bearing boards for use in humid
conditions (Type OSB/3)
9.1 General
9.2 Mechanical and swelling properties
9.3 Moisture resistance
10 Requirements for heavy duty load-bearing boards for use
in humid conditions (Type OSB/4)
10.1 General
10.2 Mechanical and swelling properties
10.3 Moisture resistance
11 Verification of compliance
11.1 General
11.2 External control, and inspection of an isolated lot
11.3 Factory production control
12 Marking
12.1 Boards marketed within the European Economic
Area for construction applications
12.2 Other boards
Annex A (normative) EN 1087-1 (Modified procedure)
Annex B (normative) Voluntary colour coding system for OSB
Annex C (normative) Supplementary properties
Bibliography
Defines, classifies and specifies the requirements for Oriented Strand Boards.
This European Standard applies to Oriented Strand Boards (OSB). It defines terms, establishes a classification and specifies requirements.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.
NOTE Test methods for determination of mechanical properties for structural purposes are given in EN 789. Determination of characteristic values of mechanical properties and density for structural purposes is given in EN 1058. Design characteristic values for OSB are given in EN 12369-1.
Information on supplementary properties is given in Annex C.
| Committee |
B/541
|
| DevelopmentNote |
Supersedes 92/87714 DC and BS 5669-3(1992). (08/2005) Supersedes 04/30113724 DC (09/2006)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 300:2006-09 | Identical |
| UNE-EN 300:2007 | Identical |
| NBN EN 300 : 2006 | Identical |
| NF EN 300 : 2006 | Identical |
| NEN EN 300 : 2006 | Identical |
| SN EN 300 : 2006 | Identical |
| EN 300:2006 | Identical |
| NS EN 300 : 2ED 2006 | Identical |
| I.S. EN 300:2006 | Identical |
| UNI EN 300 : 2006 | Identical |
| DEFSTAN 81-113/1(2000) : 2000 | CASE, WOOD, COLLAPSIBLE, REUSABLE |
| DEFSTAN 81-21/5(2007) : 2007 | CASES, FIBREBOARD AND WOOD |
| 08/30140202 DC : 0 | BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING |
| BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
| BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
| BS 8203:2017 | Code of practice for installation of resilient floor coverings |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| DEFSTAN 81-14/6(2004) : 2004 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| DEFSTAN 81-14/7(2012) : 2012 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| DEFSTAN 81-29/3(1999) : 1999 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-41(PT5)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 5 - PACKAGING PROCESSES |
| DEFSTAN 81-41(PT5)/6(2008) : 2008 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
| DEFSTAN 81-12/6(1998) : 1998 | CASES, WOOD (PANEL AND BATTEN CONSTRUCTION) |
| DEFSTAN 81-41(PT2)/6(2005) : 2005 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-41(PT2)/4(1999) : 1999 | PACKAGING OF DEFENCE MATERIEL - DESIGN |
| DEFSTAN 81-8/5(2000) : 2000 | CASES, WOOD (METAL EDGED CONSTRUCTION) |
| DEFSTAN 81-12/7(2006) : 2006 | CASES, WOOD (PANEL AND BATTEN CONSTRUCTION) |
| DEFSTAN 81-148/1(2017) : 2017 | BOARD, PROCESSED WOOD FOR GENERAL PACKAGING |
| DEFSTAN 81-41(PT2)/5(2002) : 2002 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-14/8(2013) : 2013 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| DEFSTAN 81-8/6(2007) : 2007 | CASES, WOOD (METAL EDGED CONSTRUCTION) |
| DEFSTAN 81-41(PT2)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-29/5(2014) : 2014 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-23/6(2015) : 2015 | CASES, BOARD, COLLAPSIBLE |
| DEFSTAN 81-29/4(2007) : 2007 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-12/8(2014) : 2014 | CASES, WOOD (PANEL AND BATTEN CONSTRUCTION) |
| DEFSTAN 81-8/7(2015) : 2015 | CASES, WOOD (METAL EDGED CONSTRUCTION) |
| DEFSTAN 81-41(PT5)/5(2002) : 2002 | PACKAGING OF DEFENCE MATERIEL - PART 5: PRODUCTION PROCESSES |
| DEFSTAN 81-003/11(2017) : 2017 | CASES, WOOD |
| DEFSTAN 81-41(PT5)/4(1999) : 99 AMD 1 00 | PACKAGING OF DEFENCE MATERIEL - PART 5: PRODUCTION PROCESSES |
| DEFSTAN 81-23/5(2005) : 2005 | CASES, BOARD, COLLAPSIBLE |
| 11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 05/30121961 DC : DRAFT JUL 2005 | BS 4841-3 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 3: SPECIFICATION FOR LAMINATED INSULATION BOARDS (ROOFBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION FOR BUILT-UP ROOFS UNDER BITUMENISED ROOFING MEMBRANES |
| DEFSTAN 81-113/2(2006) : 2006 | CASES, WOOD, COLLAPSIBLE, REUSABLE |
| BS 5268-2:2002 | STRUCTURAL USE OF TIMBER - PART 2: CODE OF PRACTICE FOR PERMISSIBLE STRESS DESIGN, MATERIALS AND WORKMANSHIP |
| BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
| BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
| BS 4841-3:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
| BS 4841-4:2006 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
| BS 5268-6.2(2001) : 2001 | STRUCTURAL USE OF TIMBER - PART 6: CODE OF PRACTICE FOR TIMBER FRAME WALLS - SECTION 6.2: BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING FOUR STOREYS |
| 11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
| DD ENV 1995-1.2 : DRAFT JAN 2000 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2 - GENERAL RULES - STRUCTURAL FIRE DESIGN |
| 05/30124175 DC : DRAFT JUL 2005 | BS 4841-4 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 4: SPECIFICATION FOR LAMINATED INSULATION BOARDS (FLOORBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION COVERED BY SINGLE-PLY NON-BITUMINISED ROOFING MEMBRANES |
| DEFSTAN 81-21/6(2015) : 2015 | CASES, FIBREBOARD AND WOOD |
| DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| 09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| BS PAS 23-1(1999) : 1999 | GENERAL PERFORMANCE REQUIREMENTS FOR DOOR ASSEMBLIES - PART 1: SINGLE LEAF, EXTERNAL DOOR ASSEMBLIES TO DWELLINGS |
| BS 5268-6.1:1996 | Structural use of timber Code of practice for timber frame walls - Dwellings not exceeding seven storeys |
| BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
| 01/122607 DC : DRAFT JULY 2001 | BS 5325 - CODE OF PRACTICE FOR INSTALLATION OF TEXTILE FLOOR COVERINGS |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 16/30348805 DC : 0 | BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| 02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 08/30154716 DC : DRAFT DEC 2008 | BS 5268-6-2 AMD1 - STRUCTURAL USE OF TIMBER - PART 6-2: CODE OF PRACTICE FOR TIMBER FRAME WALLS - BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING 4 STOREYS |
| DEFSTAN 81-21/4(1999) : 1999 | CASES, FIBREBOARD AND WOOD |
| DEFSTAN 81-113/3(2016) : 2016 | CASES, WOOD, COLLAPSIBLE, REAUSABLE |
| DEFSTAN 81-041(PT5)/8(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.