BS EN 3155-024:2006
Current
Current
The latest, up-to-date edition.
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-10-2006
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
Describes the required characteristics and tests applicable to male electrical contacts, type D, crimp, class S, -65 degrees C to 200 degrees C, size 8 used in elements of connection according to EN 3155-001.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 94/713135 DC. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 3155-024 : 2006 | Identical |
| NS EN 3155-024 : 1ED 2006 | Identical |
| I.S. EN 3155-024:2006 | Identical |
| DIN EN 3155-024:2007-11 | Identical |
| NBN EN 3155-024 : 2006 | Identical |
| UNI EN 3155-024 : 2008 | Identical |
| SN EN 3155-024 : 2006 | Identical |
| NF EN 3155-024 : 2006 | Identical |
| EN 3155-024:2006 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 306: MOULD GROWTH |
| EN 4530-002:2006 | Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves |
| EN 2591-301 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 301: ENDURANCE AT TEMPERATURE |
| EN 2591-305 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 305: RAPID CHANGE OF TEMPERATURE |
| SAE AMS 1424 : 2016 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| EN 2591-213 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 213: SHIELDING EFFECTIVENESS FROM 100 MHZ TO 1 GHZ |
| EN 2591-418 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 418: GAUGE INSERTION/EXTRACTION FORCES (FEMALE CONTACTS) |
| EN 2591-502 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 502: RESTRICTED ENTRY |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| PREN 4008-004 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 004: DIE FOR CRIMPING TOOL M22520/5-01 - PRODUCT STANDARD |
| EN 2591-201 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 201: CONTACT RESISTANCE - LOW LEVEL |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| EN 2591-417 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 417: TENSILE STRENGTH (CRIMPED CONNECTION) |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-406 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 406: MECHANICAL ENDURANCE |
| PREN 3375-003 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD |
| MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-204 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 204: DISCONTINUITY OF CONTACTS IN THE MICROSECOND RANGE |
| EN 2591-206 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 206: MEASUREMENTS OF INSULATION RESISTANCE |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| PREN 4008-003 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 003: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| EN 2591-210 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 210: ELECTRICAL OVERLOAD |
| EN 3155-025:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| SAE AS 39029/90 : 2012 | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| EN 3155-013:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 503: CONTACT DEFORMATION AFTER CRIMPING |
| PREN 3375-004 : 0 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD |
| EN 2591-202 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 202: CONTACT RESISTANCE AT RATED CURRENT |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| SAE AS 39029/91 : 2012 | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8 |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-207 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 207: VOLTAGE PROOF TEST |
| EN 2591-416 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 416: CONTACT BENDING STRENGTH |
| EN 2591-415 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 415: TEST PROBE DAMAGE (FEMALE CONTACTS) |
| PREN 3375-005 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
£134.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.