BS EN 4530-001:2006
Current
Current
The latest, up-to-date edition.
Aerospace series. Sealing sleeves used in elements of connection Technical specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-10-2006
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Conditions of use and temperature classes
5 Design and description
6 Dimensions and mass
7 Operation
8 Tests
9 Quality assurance
10 Designation and marking
11 Delivery condition
12 Packaging
13 Storage
Specifies: - the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection; - the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance; - the test programme and groups.
This standard specifies: - the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection; - the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance; - the test programme and groups. It is applicable to removable sealing sleeves used in connectors or in other elements of electrical connection.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 02/706952 DC (11/2006)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 4530-001 : 2006 | Identical |
| NF EN 4530-001 : 2006 | Identical |
| UNI EN 4530-001 : 2007 | Identical |
| EN 4530-001:2006 | Identical |
| DIN EN 4530-001:2008-02 | Identical |
| NEN EN 4530-001 : 2006 | Identical |
| I.S. EN 4530-001:2006 | Identical |
| NBN EN 4530-001 : 2006 | Identical |
| NS EN 4530-001 : 1ED 2006 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 306: MOULD GROWTH |
| EN 2591-205 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 205: HOUSING (SHELL) ELECTRICAL CONTINUITY |
| EN 2591-301 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 301: ENDURANCE AT TEMPERATURE |
| EN 2591-311 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 311: LOW AIR PRESSURE |
| EN 2591-305 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 305: RAPID CHANGE OF TEMPERATURE |
| EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
| EN 2591-421:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall |
| EN 2591-213 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 213: SHIELDING EFFECTIVENESS FROM 100 MHZ TO 1 GHZ |
| EN 2591-418 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 418: GAUGE INSERTION/EXTRACTION FORCES (FEMALE CONTACTS) |
| EN 2591-425 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 425: UNWRAPPING CAPABILITY, SOLDERLESS WRAPPED CONNECTIONS |
| EN 2591-502 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 502: RESTRICTED ENTRY |
| EN 2591-316 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 316: OZONE RESISTANCE |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-405 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 405: AXIAL LOAD |
| EN 2591-308 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 308: SAND AND DUST |
| EN 2591-318 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 318: FIRE-RESISTANCE |
| EN 2591-401 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 401: ACCELERATION, STEADY STATE |
| EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| EN 2591-412 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 412: CONTACT INSERTION AND EXTRACTION FORCES |
| EN 2591-414 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 414: UNMATING OF LANYARD RELEASE CONNECTORS |
| EN 2591-203 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 203: ELECTRICAL CONTINUITY AT MICROVOLT LEVEL |
| EN 2591-408 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 408: MATING AND UNMATING FORCES |
| EN 2591-323 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 323: THERMAL SHOCK |
| EN 2591-201 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 201: CONTACT RESISTANCE - LOW LEVEL |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-417 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 417: TENSILE STRENGTH (CRIMPED CONNECTION) |
| EN 2591-322 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 322: HERMETICITY |
| EN 2591-312 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 312: AIR LEAKAGE |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-424 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 424: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 406: MECHANICAL ENDURANCE |
| EN 2591-216 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 216: ENGAGEMENT DEPTH OF CONTACTS |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| EN 2591-410 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 410: INSERT RETENTION IN HOUSING (AXIAL) |
| EN 2591-320 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 320: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 2591-204 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 204: DISCONTINUITY OF CONTACTS IN THE MICROSECOND RANGE |
| EN 2591-505 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 505: CONTACT PROTECTION EFFECTIVENESS (SCOOP-PROOF) |
| EN 2591-206 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 206: MEASUREMENTS OF INSULATION RESISTANCE |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| EN 2591-317 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 317: FLAMMABILITY |
| EN 2591-208 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 208: TEMPERATURE RISE DUE TO RATED CURRENT |
| EN 2591-409 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 409: CONTACT RETENTION IN INSERT |
| EN 2591-313 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 313: ARTIFICIAL RAIN |
| EN 2591-210 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 210: ELECTRICAL OVERLOAD |
| EN 2591-506 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 506: USE OF TOOLS |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| EN 2591-407 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 407: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS |
| EN 2591-321 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 321: DAMP HEAT, CYCLIC TEST |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 2591-314 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 314: IMMERSION AT LOW AIR PRESSURE |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-413 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 413: HOLDING FORCE OF GROUNDING SPRING SYSTEM |
| EN 2591-309 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 309: DRY HEAT |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-304 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 304: DAMP HEAT STEADY STATE |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 503: CONTACT DEFORMATION AFTER CRIMPING |
| EN 2591-411 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 411: INSERT RETENTION IN HOUSING (TORSIONAL) |
| EN 2591-419 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 419: STABILITY OF MALE CONTACTS IN INSERT |
| EN 2591-202 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 202: CONTACT RESISTANCE AT RATED CURRENT |
| EN 2591-302 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - CLIMATIC SEQUENCE |
| EN 2591-209 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 209: CURRENT TEMPERATURE DERATING |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-207 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 207: VOLTAGE PROOF TEST |
| EN 2591-422:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength |
| EN 2591-416 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 416: CONTACT BENDING STRENGTH |
| EN 2591-324 : 1998 | This standard specifies a method of verifying the interfacial sealing of elemntsof connection. |
| EN 2591-512:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell |
| EN 2591-415 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 415: TEST PROBE DAMAGE (FEMALE CONTACTS) |
| EN 2591-310 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 310: COLD |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| EN 2591-404 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 404: TRANSVERSE LOAD |
| EN 2591-303 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 303: COLD/LOW PRESSURE AND DAMP HEAT |
£112.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.