• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 45510-2-8:2004

Current
Current

The latest, up-to-date edition.

Guide for procurement of power station equipment Electrical equipment - Power cables
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-12-2004

Foreword
1 Scope
2 Normative references
3 Definitions
   3.1 Organisational terms
   3.2 Technical terms
   3.3 General terms
4 Brief overall project description
   4.1 Role and organisation of purchaser
   4.2 Site location
   4.3 Equipment task
   4.4 Equipment to be purchased
   4.5 Control and instrumentation
   4.6 Electrical supplies and other services
   4.7 Other interfaces
   4.8 Project programme
   4.9 Equipment identification systems
5 Extent of supply
6 Terminal points
7 Operational requirements
   7.1 Operating environment
   7.2 Manning levels
   7.3 Normal operation
   7.4 Operating hours
   7.5 Start-up and shut-down
   7.6 Abnormal conditions
   7.7 Further operational requirements
8 Life expectancy
9 Performance requirements
10 Design and fabrication
   10.1 Specific equipment features
   10.2 Design justification
   10.3 Material selection
   10.4 Safety
   10.5 Interchangeability
   10.6 Fabrication methods
11 Maintenance requirements
12 Technical documentation requirements
   12.1 Tender documentation
   12.2 Contract documentation
13 Applicable legislation, regulations, standards and
   further requirements
   13.1 Legislation and regulations
   13.2 Standards
   13.3 Further requirements
14 Evaluation criteria
   14.1 General
   14.2 Technical criteria
15 Quality measures
   15.1 General
   15.2 Approvals procedure
   15.3 Inspection requirements
   15.4 Non-conformity
16 Site factors
   16.1 Access
   16.2 Facilities
   16.3 Site specific requirements
17 Verification of specified performance
   17.1 General
   17.2 Works tests
   17.3 Tests during installation and commissioning
   17.4 Technical conditions for trial run
   17.5 Functional and performance tests
Annex A (informative) Bibliography
Annex B (informative) Information for selection of power
        cables

Provides guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations).

This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

This Guide covers power cables only for voltages up to and including Um=41,5kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems.

For guidance on the technical specification of cables, including their installation and termination, refer to EN45510-2-6

The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied.

This Guide indicates to potential purchasers how their specification should be prepared so that:

  • the equipment type and capacity interfaces correctly with other elements of the systems;

  • predicted performance is achieved;

  • ancillary equipment is properly sized;

  • reliability, availability and safety requirements are achieved;

  • proper consideration is given to the evaluation process and the quality measures to be applied.

This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover:

  • any commercial, contractual or legal issues which are normally in separate parts of an enquiry;

  • any allocation of responsibilities which are determined by the contract.

This Guide does not prescribe the arrangement of the documents in the enquiry.

NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Committee
PEL/99
DocumentType
Standard
Pages
24
PublisherName
British Standards Institution
Status
Current

EN 50268-1:1999 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
HD 622 S1:1996/A2:2005 Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
HD 627 S1:1996/A2:2005 MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
IEC 60986:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
IEC 60724:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
HD 605 S2:2008/corrigendum:2010 ELECTRIC CABLES - ADDITIONAL TEST METHODS
HD 620 : 2010 DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV
IEC 60949:1988 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
EN 50266-1:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1: Apparatus
HD 603 S1:1994/A3:2007 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60183:2015 Guidance for the selection of high-voltage A.C. cable systems
EN 50268-2:1999 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure
EN 50265-2-2:1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-2: Procedures - Diffusion flame
EN ISO 8402 : 1995 QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY
IEC 60331:1970 Fire-resisting characteristics of electric cables
EN 50265-1:1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus
HD 604 S1:1994/A3:2005 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS
EN 50265-2-1:1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1: Procedures - 1 kW pre-mixed flame

View more information
£198.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.