BS EN 50131-1 : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
Hardcopy , PDF
02-07-2020
English
01-01-2006
Introduction
1 Scope
2 Normative references
3 Definitions and abbreviations
4 System functions
5 System components
6 Security grading
7 Environmental classification
8 Functional requirements
9 Power supply
10 Operational reliability
11 Functional reliability
12 Environmental requirements
13 Electrical safety
14 Documentation
15 Marking/Identification
Annex A (normative) - Special national conditions
Bibliography
Describes the requirements for Intrusion and Hold-up Alarm Systems installed in buildings using specific or non-specific wired interconnections or wire-free interconnections.
Committee |
GW/1
|
DevelopmentNote |
Supersedes 95/520958 DC. (11/2003) Supersedes BS 6799(1986), BS 4737-1(1986), BS 6800(1986), BS 7042(1988) and BS DD244(1998). (04/2004) Supersedes 04/30080013 DC. (11/2006) Supersedes 08/30182142 DC. (08/2009) 2006 Edition Re-Issued in July 2017 & incorporates AMD 2 2017. (08/2017)
|
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
SN EN 50131-1 : 2006 AMD 2 2017 | Identical |
I.S. EN 50131-1:2006 | Identical |
EN 50131-1:2006/A2:2017 | Identical |
NF EN 50131-1 : 2007 AMD 2 2017 | Identical |
NBN EN 50131-1 : 2007 AMD 2 2010 | Identical |
UNE-EN 50131-1:2008 | Identical |
EN 50131-1:2006 | Identical |
NEN EN 50131-1 : 2006 AMD 2 2017 | Identical |
DIN EN 50131-1 : 2017 | Identical |
16/30338263 DC : 0 | BS 1722-17 - FENCES - PART 17: SPECIFICATION FOR ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE |
03/119007 DC : DRAFT DEC 2003 | BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DWELLINGS |
07/30150968 DC : 0 | BS 7984 - KEYHOLDING AND RESPONSE SERVICES - CODE OF PRACTICE |
BS 5839-6:2013 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises |
BS 7499:2007 | Static site guarding and mobile patrol services. Code of practice |
BS 5839-1(2002) : 2002 | FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
BS 1722-17:2006 | Fences Specification for electric security fences. Design, installation and maintenance |
12/30260278 DC : 0 | BS 5839-1 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
11/30238815 DC : 0 | BS 7872 - MANNED SECURITY SERVICES - CASH-IN-TRANSIT SERVICES (COLLECTION AND DELIVERY) - CODE OF PRACTICE |
13/30286749 DC : 0 | BS 8591 - REMOTE CENTRES RECEIVING SIGNALS FROM ALARM SYSTEMS - CODE OF PRACTICE |
BS PAS 49(2002) : 2002 | SECURITY CONSULTANCY - CODE OF PRACTICE |
ISO/TR 19814:2017 | Information and documentation Collections management for archives and libraries |
BS 7984:2008 | Keyholding and response services. Code of practice |
BS 5979:2007 | Remote centres receiving signals from fire and security systems. Code of practice |
PD 6662:2010 | Scheme for the application of European standards for intrusion and hold-up alarm systems |
PD 6662:2017 | Scheme for the application of European Standards for intrusion and hold-up alarm systems |
BS 5979:2000 | Code of practice for remote centres receiving signals from security systems |
BS 7872:2011 | Manned security services. Cash and valuables in transit services (collection and delivery). Code of practice |
BS 8591:2014 | Remote centres receiving signals from alarm systems. Code of practice |
PD ISO/TR 19814:2017 | Information and documentation. Collections management for archives and libraries |
06/30147281 DC : DRAFT DEC 2006 | BS 7499 - STATIC SITE GUARDING AND MOBILE PATROL SERVICES - CODE OF PRACTICE |
BS PAS 47(2003) : 2003 | ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE - SPECIFICATION |
BS DD263(2007) : 2007 | INTRUDER AND HOLD-UP ALARM SYSTEMS - COMMISSIONING, MAINTENANCE AND REMOTE SUPPORT - CODE OF PRACTICE |
BS 8473(2006) : 2006 | INTRUDER AND HOLD-UP ALARM SYSTEMS - MANAGEMENT OF FALSE ALARMS - CODE OF PRACTICE |
BS 8220-3:2004 | Guide for security of buildings against crime Storage, industrial and distribution premises |
16/30338904 DC : 0 | BS 9263 - INTRUDER AND HOLD-UP ALARM SYSTEMS - COMMISSIONING, MAINTENANCE AND REMOTE SUPPORT - CODE OF PRACTICE |
PD 5454:2012 | Guide for the storage and exhibition of archival materials |
BS PAS 38(2000) : 2000 | INSTALLATION AND REMOTE MONITORING OF DETECTOR ACTIVATED CCTV SYSTEMS - CODE OF PRACTICE |
BS 8584:2015 | Vacant property protection services. Code of practice |
17/30356170 DC : 0 | PD 6669 - GUIDANCE FOR THE PROVISION OF ALARM TRANSMISSION SYSTEMS FOR ALARM SYSTEMS IN THE UK |
02/700084 DC : DRAFT JAN 2002 | BS 8418 - INSTALLATION AND REMOTE MONITORING OF DETECTOR ACTIVATED CCTV SYSTEMS - CODE OF PRACTICE |
09/30203716 DC : 0 | PD 6662 - SCHEME FOR THE APPLICATION OF EUROPEAN STANDARDS FOR INTRUSION AND HOLD-UP ALARM SYSTEMS |
BS 8243(2010) : 2010 | INSTALLATION AND CONFIGURATION OF INTRUDER AND HOLD-UP ALARM SYSTEMS DESIGNED TO GENERATE CONFIRMED ALARM CONDITIONS - CODE OF PRACTICE |
BS 1722-17:2017 | Fences Specification for electric security fences. Design, installation and maintenance |
06/30133574 DC : DRAFT DEC 2006 | BS 5979 - CODE OF PRACTICE FOR REMOTE CENTRES RECEIVING SIGNALS FROM SECURITY SYSTEMS |
PD 6669:2017 | Guidance for the provision of Alarm Transmission Systems (ATS) for Alarm Systems in the UK |
05/30127561 DC : DRAFT AUG 2005 | BS 8470 - CODE OF PRACTICE FOR THE SECURE DESTRUCTION OF CONFIDENTIAL MATERIAL |
13/30275054 DC : 0 | BS 7499 - STATIC SITE GUARDING AND MOBILE PATROL SERVICES - CODE OF PRACTICE |
12/30260280 DC : 0 | BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DOMESTIC PREMISES |
BS 8418:2003 | Installation and remote monitoring of detector activated CCTV systems. Code of practice |
PD 7974-4:2003 | Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4) |
09/30199560 DC : 0 | BS 8243 (REV DD 243) - INSTALLATION AND CONFIGURATION OF INTRUDER AND HOLDUP ALARM SYSTEMS DESIGNED TO GENERATE CONFIRMED ALARM CONDITIONS - CODE OF PRACTICE |
BS 7984:2001 | Keyholding and response services. Code of practice |
BS 7499:2013 | Static site guarding and mobile patrol service. Code of practice |
BS 5839-6:2004 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
CLC/TS 50131-7:2010 | Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines |
EN 50136-1:2012 | Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems |
EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
EN 50136-1-1 : 98 AMD 2 2008 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
EN 50131-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
EN 50131-6:2017 | Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies |
EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
EN 50130-5:2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.