BS EN 515:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
31-03-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Basis of codification
5 Basic temper designations
6 Subdivision of O (annealed) temper
designations
7 Subdivision of H (strain-hardened)
temper designations
8 Subdivision of T (thermally treated to
produce stable tempers other than
F, O or H) temper designations
9 Summary
Annex A (informative) - Recommendations for
further T tempers extensions
Bibliography
Provides temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought.
This European Standard establishes temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought. NOTE Some of these temper designations may be subject of patent or patent applications and their listing herein is not to be construed in any way as the granting of a license under such patent right. Additional temper designations, conforming to this standard, may be standardized with CEN/TC 132 and AECMA/5 provided: - the temper is used or is available for use by more than one user; - mechanical property limits are defined; - the characteristics of the temper are significantly different from those of all other tempers which have the same sequence of basic treatments and for which designations already have been assigned for the same alloy and product; - the following are also defined if characteristics other than mechanical properties are considered significant: a) test methods and limits for the characteristics; or b) the specific practices used to produce the temper.
| Committee |
NFE/35
|
| DevelopmentNote |
Together with BS EN 573-3&4, BS EN 754-1&2 & BS EN 754-7&8 supersedes BS 1471(1972)&with BS EN 573-3&4, BS EN 586-1&2, BS EN 603-1&2 & BS EN 604-1 supersedes BS 1472(1972)&with BS EN 12020-1&2, BS EN 573-3&4 & BS EN 755-1 TO 9 supersedes BS 1474(1987)&with BS EN 573-3 & 4 & BS EN 755-1 TO 9 supersedes BS 4300-12(1969)&with BS EN 573-3&4 & BS EN 755-1 TO 9 supersedes BS 4300-15(1973)&with BS EN 573-3&4, BS EN 755-1 TO 6 & BS EN 755-9 supersedes BS 4300-4(1973)&with BS EN 485-1 TO 4&BS EN 573-1 TO 4 supersedes BS 1470(1987)&supersedes 91/42722 DC. (04/2003) Supersedes 15/30330708 DC.(03/2017)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 515 : 2017 | Identical |
| UNI EN 515 : 1996 | Identical |
| EN 515:2017 | Identical |
| UNE-EN 515:2017 | Identical |
| NEN EN 515 : 2017 | Identical |
| DIN EN 515:2016-01 (Draft) | Identical |
| I.S. EN 515:2017 | Identical |
| NBN EN 515 : 1993 | Identical |
| NS EN 515 : 2017 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| 09/30196835 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| DEFSTAN 59-411(PT1)/2(2014) : 2014 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| BS 8529:2010 | Composite doorsets. Domestic external doorsets. Specification |
| DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-862(PT1)/2(2007) : 2007 | FASTENERS - PART 1: GENERAL |
| DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-862(PT3)/2(2007) : 2007 | FASTENERS - PART 3: NON-FERROUS FASTENERS |
| DEFSTAN 02-840/3(2021):2021 | Requirements for Aluminium Alloy Patterned Treadplate and Treadstrip |
| DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-831(PT3)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 3: TUBES (EXCLUDING GUARD RAIL TUBES) |
| DEFSTAN 02-831(PT2)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 2: EXTRUDED SECTIONS (INCLUDING STANDARD EXTRUSIONS AND SPECIAL EXTRUSIONS) |
| DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-840/2(2010) : 2010 | REQUIREMENTS FOR ALUMINIUM ALLOY PATTERNED TREADPLATE AND TREADSTRIP |
| DEFSTAN 02-860/1(2010) : 2010 | REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF PORTABLE FIRE EXTINGUISHERS |
| DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
| DEFSTAN 59-411(PT1)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
| DEFSTAN 02-900(PT0)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-831(PT1)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 1: SHEET, STRIP AND PLATE (INCLUDING PERFORATED SHEET) |
| DEFSTAN 02-122/1(2002) : INTERIM | REQUIREMENTS FOR CATERING EQUIPMENT |
| BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| 16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 7412:2002 | Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification |
| BS 5628-3:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS PD5500(2009) : 2009 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
| BS 1474:1987 | Specification for wrought aluminium and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections |
| BS 7412:2007 | Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
| BS PD5500(2012) : 2012 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS EN 603-1:1997 | Aluminium and aluminium alloys. Wrought forging stock Technical conditions for inspection and delivery |
| BS EN 603-2:1997 | Aluminium and aluminium alloys. Wrought forging stock Mechanical properties |
| 06/30143171 DC : DRAFT SEP 2006 | BS 7412 - PLASTICS WINDOWS AND DOORSETS MADE FROM UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) EXTRUDED HOLLOW PROFILES |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.