IEC 61193-2:2007
|
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
|
EN 60294:2012
|
Measurement of the dimensions of a cylindrical component with axial terminations
|
EN 60301:2012
|
Preferred diameters of wire terminations of capacitors and resistors
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
IEC Q 03-3 : 2.1
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME
|
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
EN 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
|
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance
|
IEC 61192-3:2002
|
Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies
|
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60286-2:2015
|
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
|
EN 61760-1:2006
|
SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
|
IEC 61760-1:2006
|
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
|
EN 60027-1:2006/A2:2007
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL
|
EN 60440 : 2012
|
Method of measurement of non-linearity in resistors
|
EN 60286-2:2015
|
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
|
IEC 60027-1:1992
|
Letters symbols to be used in electrical technology - Part 1: General
|
EN 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations
|
IEC 60294:2012
|
Measurement of the dimensions of a cylindrical component with axial terminations
|
IEC Q 03-3-1 : 1ED 2013
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3-1: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT-TECHNOLOGY CERTIFICATION (IECQ AC-TC)
|
EN 61193-2 : 2007
|
QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
|
EN 61192-3:2003
|
Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies
|
EN 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
EN 60115-1:2011/A11:2015
|
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
|
EN 61340-3-1:2007
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
|
IEC 60062:2016
|
Marking codes for resistors and capacitors
|
EN 60062:2016/AC:2016-12
|
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016)
|
IEC 61340-3-1:2006
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
|
IEC 60301:2012
|
Preferred diameters of wire terminations of capacitors and resistors
|
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
|
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure
|
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
|
IEC 60063:2015
|
Preferred number series for resistors and capacitors
|
IEC 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations
|
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
IEC 60286-1:2017
|
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
|
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
|
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC 60440:2012
|
Method of measurement of non-linearity in resistors
|
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
|
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC 60115-1:2008
|
Fixed resistors for use in electronic equipment - Part 1: Generic specification
|
IEC 60195:2016
|
Method of measurement of current noise generated in fixed resistors
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|