• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 60204-1 : 2006

Current
Current

The latest, up-to-date edition.

SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2006

INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 Incoming supply conductor terminations and devices for
   disconnecting and switching off
6 Protection against electric shock
7 Protection of equipment
8 Equipotential bonding
9 Control circuits and control functions
10 Operator interface and machine-mounted control devices
11 Controlgear: location, mounting, and enclosures
12 Conductors and cables
13 Wiring practices
14 Electric motors and associated equipment
15 Accessories and lighting
16 Marking, warning signs and reference designations
17 Technical documentation
18 Verification
Annex A (normative) - Protection against indirect contact
        in TN-systems
Annex B (informative) - Enquiry form for the electrical
        equipment of machines
Annex C (informative) - Examples of machines covered by this
        part of IEC 60204
Annex D (informative) - Current-carrying capacity and
        overcurrent protection of conductors and cables in
        the electrical equipment of machines
Annex E (informative) - Explanation of emergency operation
        functions
Annex F (informative) - Guide for the use of this part of IEC
        60204
Annex G (informative) - Comparison of typical conductor
        cross-sectional areas
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Annex ZZ (informative) - Coverage of Essential Requirements
         of EC Directives
Bibliography
Index

Pertains to the application of electrical, electronic and Programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner.

Committee
MCE/3
DevelopmentNote
1993 version along with its amendment remains current. (07/1999) Supersedes 94/203921 DC. Supersedes 90/25823 DC. (09/2005) Supersedes 02/203840 DC. (07/2006) 2006 Edition Re-Issued in April 2009 & incorporates AMD 1 2009. (04/2009)
DocumentType
Standard
Pages
130
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 6037-1:2017 Planning, design, installation and use of permanently installed access equipment. Code of practice Suspended access equipment
11/30218915 DC : DRAFT JAN 2011 BS 6164 - CODE OF PRACTICE FOR HEALTH AND SAFETY IN TUNNELING IN THE CONSTRUCTION INDUSTRY
17/30342093 DC : 0 BS 6037-1 - PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - CODE OF PRACTICE - PART 1: SUSPENDED ACCESS EQUIPMENT
95/107917 DC : 0 MACHINERY AND PLANT FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems General principles for design
BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry
BS 6037-1:2003 Code of practice for the planning, design, installation and use of permanently installed access equipment Suspended access equipment
BS 6440:2011 Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification
BS 7905-1:2001 Lifting equipment for performance, broadcast and similar applications Specification for the design and manufacture of above stage equipment (excluding trusses and towers)
14/30269311 DC : 0 BS 7036-0 - POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - PART 0: CODE OF PRACTICE FOR RISK ASSESSMENT AND RISK REDUCTION
03/106314 DC : 0 BS PQIR - CRANES - CONDITION MONITORING - PART 1: SPECIFICATION FOR DATA LOGGING EQUIPMENT
04/30092680 DC : DRAFT MAR 2004 BS 6037-2 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - PART 2: TRAVELLING LADDERS AND GANTRIES
PD 5304:2014 Guidance on safe use of machinery
BS 9102:2014 Code of practice for safe working on lifting platforms
DEFSTAN 02-123(PT2)/2(2002) : 2002 REQUIREMENT FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS
BS DD8483(2008) : 2008 CRANES - CONDITION MONITORING - SPECIFICATION FOR DATA LOGGING EQUIPMENT
DEFSTAN 02-123(PT2)/3(2015) : 2015 REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
BS 5900:2012 Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification
BS 6423:2014 Code of practice for maintenance of low-voltage switchgear and controlgear
PD 5304:2005 GUIDANCE ON SAFE USE OF MACHINERY
PD 5304:2000 SAFE USE OF MACHINERY
BS 4434:1995 Specification for safety and environmental aspects in the design, construction and installation of refrigerating appliances and systems
BS 6133:1995 Code of practice for safe operation of lead-acid stationary batteries
08/30181828 DC : DRAFT MAY 2008 BS 5979 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT
14/30270861 DC : 0 BS 4163 - HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN EDUCATIONAL AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
07/30016130 DC : 0 BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT
PD 6576:1995 Memorandum on health and safety standardization in support of \'New Approach\' Directives. Application in the field of machinery
13/30275813 DC : 0 BS 9102 - CODE OF PRACTICE FOR SAFE WORKING ON LIFTING PLATFORMS
BS 7255:2012 Code of practice for safe working on lifts
11/30194294 DC : 0 BS 6440 - POWERED LIFTING PLATFORMS WITH NON-ENCLOSED LIFTWAYS FOR USE BY PERSONS WITH LIMITED MOBILITY - SPECIFICATION
BS 6037-2:2004 Code of practice for the planning, design, installation and use of permanently installed access equipment Travelling ladders and gantries
96/107552 DC : DRAFT OCT 1996 BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS
08/30136724 DC : DRAFT MAY 2008 BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE
BS EN 1050:1997 Safety of machinery. Principles for risk assessment
BS 7036-0:2014 Power operated pedestrian doorsets. Safety in use Code of practice for risk assessment and risk reduction
11/30194292 DC : 0 BS 5900 - POWERED HOME LIFTS WITH FULLY OR PARTIALLY ENCLOSED CARS AND NO LIFT-WELL ENCLOSURES - SPECIFICATION
BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
BS 4163:2007 HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN SCHOOLS AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
BS 4163:2014 Health and safety for design and technology in educational and similar establishments. Code of practice
BS 6164:2001 Code of practice for safety in tunnelling in the construction industry
BS 4163:2000 HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN SCHOOLS AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE

EN 60446:2007 Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics
IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60038:2009 IEC standard voltages
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60228:2004 Conductors of insulated cables
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
IEC 61984:2008 Connectors - Safety requirements and tests
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
EN 62023:2012 Structuring of technical information and documentation
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 62023:2011 Structuring of technical information and documentation
IEC 61082-4:1996 Preparation of documents used in electrotechnology - Part 4: Location and installation documents
IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
IEC 62027:2011 Preparation of object lists, including parts lists
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
EN 61082-3:1994 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
IEC 60757:1983 Code for designation of colours
IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
IEC 61082-3:1993 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
IEC 61558-2-17:1997 Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies
EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection
IEC 61084-1:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
CISPR 61000-6-3:1996 Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments
EN 61082-2 : 1994 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 2: FUNCTION-ORIENTED DIAGRAMS
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
EN 62079:2001 Preparation of instructions - Structuring, content and presentation
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
IEC 60364-6-61:2001 Electrical installations of buildings - Part 6-61: Verification - Initial verification
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 61082-4:1996 Preparation of documents used in electrotechnology - Part 4: Location and installation documents
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 61984:2009 Connectors - Safety requirements and tests
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
EN 60947-7-1:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
EN 62027:2012 Preparation of object lists, including parts lists
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
IEC 61082-2:1993 Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams
EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
IEC 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

View more information
£320.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.