BS EN 60320-1:2015
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
29-02-2016
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Standard ratings
7 Classification of appliance couplers
8 Marking
9 Dimensions and compatibility
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction
14 Moisture resistance
15 Insulation resistance and electric strength
16 Forces necessary to insert and to withdraw
the connector/appliance outlet
17 Operation of contacts
18 Resistance to heating of appliance couplers for
hot conditions or very hot conditions
19 Breaking capacity
20 Normal operation
21 Temperature rise
22 Cords and their connection
23 Mechanical strength
24 Resistance to heat and ageing
25 Screws, current-carrying parts and connections
26 Clearances, creepage distances and solid insulation
27 Resistance of insulating material to heat, fire and tracking
28 Resistance to rusting
29 Electromagnetic compatibility (EMC) requirements
Annex A (normative) - Proof tracking test
Annex B (normative) - Routine tests for factory wired
appliance couplers related to safety
Annex C (normative) - Test schedule
Annex D (informative) - Comparison of typical conductor
cross-sectional areas
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply.
Committee |
PEL/23/3
|
DevelopmentNote |
Supersedes 98/202171 DC. (05/2005) Supersedes 04/30114257 DC. (10/2008) 2001 + A1 2007 Edition remains active & will be withdrawn on 29/07/2018. Supersedes 12/30240603 DC. (10/2015)
|
DocumentType |
Standard
|
ISBN |
9780539051353
|
Pages |
68
|
ProductNote |
THIS SATANDARD ALSO TO REFERS : CROSS REFERENCES : EN 60320, IEC 60417, IEC 61058 IEC 60245, IEC 60320, EN 61058, IEC 60050.
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 62056-6-2:2013 | Identical |
SN EN 60320-1 : 2015 | Identical |
I.S. EN 60320-1:2015 | Identical |
DIN EN 60320-1 : 2016 | Identical |
IEC 60320-1:2015/COR1:2016 | Identical |
IEC 60320-1:2015 | Identical |
NBN EN 60320-1 : 2015 COR 2016 | Identical |
NF EN 60320-1 : 2017 | Identical |
EN 60320-1:2015/AC:2016 | Identical |
UNE-EN 60320-1:2016 | Identical |
NEN EN 60320-1 : 90 AMD 11 95 | Identical |
BS 7909:2011 | Code of practice for temporary electrical systems for entertainment and related purposes |
BS 7671(2008) : 2018 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
BS EN 60491:1997 | Safety requirements for electronic flash apparatus for photographic purposes |
BS 6396(2008) : 2008 | ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION |
BS 6396:2008+A1:2015 | Electrical systems in office furniture and educational furniture. Specification |
BS EN 60601-2-35:1997 | Medical electrical equipment. Particular requirements for safety Specification for blankets, pads and mattresses intended for heating in medical use |
BS 5724-2.35(1997) : 1997 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR BLANKETS, PADS AND MATTRESSES INTENDED FOR HEATING AND MEDICAL USE |
08/30177004 DC : DRAFT JULY 2008 | BS 6396 - ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION |
BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60730-2-11:2006 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
EN 60068-2-60:2015 | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
EN ISO 1456:2009 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
EN 60112 : 2003 AMD 1 2009 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
EN 60730-2-11:2008 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
EN 60999-1:2000 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
IEC 60320-3:2014 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
EN 60320-3:2014 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.