• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 61076-4-107:2001

Current
Current

The latest, up-to-date edition.

Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

26-11-2001

1 General data
  1.1 Recommended method of mounting
  1.2 Ratings and characteristics
  1.3 Normative references
  1.4 Marking
  1.5 IEC type designation
  1.6 Ordering information
2 Technical information
  2.1 Definitions
  2.2 Survey of styles and variants
  2.3 Information on application
      2.3.1 Complete connectors (pairs)
      2.3.2 Fixed board connectors
      2.3.3 Free board connectors
      2.3.4 Accessories
      2.3.5 Shielding/grounding
      2.3.6 Basic types of terminations
3 Dimensional information
  3.1 General
  3.2 Isometric view and common features
  3.3 Engagement (mating) information
  3.4 Fixed board connectors
      3.4.1 Dimensions
      3.4.2 Terminations
  3.5 Free board connectors
      3.5.1 Dimensions
      3.5.2 Terminations
  3.6 Accessories
  3.7 Mounting information for fixed board connectors
      3.7.1 Hole pattern for fixed board connectors
      3.7.2 Mounting on panels
  3.8 Mounting information for free board connectors (cable to
      cable, cable to panel, cable to printed board)
      3.8.1 Connector with standard contacts
      3.8.2 Connector with coaxial contacts
  3.9 Gauges
      3.9.1 Sizing gauges and retention force gauges
      3.9.2 Mechanical operation, engaging/separating force,
            insertion/withdrawal force gauges
      3.9.3 Probes
      3.9.4 Contact resistance gauge
      3.9.5 Test panels (for voltage proof test)
4 Characteristics
  4.1 Climatic category
  4.2 Electrical
      4.2.1 Creepage and clearance distances
      4.2.2 Voltage proof
      4.2.3 Current-carrying capacity
      4.2.4 Contact resistance
      4.2.5 Insulation resistance
  4.3 Mechanical
      4.3.1 Mechanical operation
      4.3.2 Insertion and withdrawal forces (or engaging and
            separating forces)
      4.3.3 Contact retention in insert
      4.3.4 Polarizing method
      4.3.5 Cable clamp resistance to cable rotation
      4.3.6 Cable clamp resistance to cable pull (tensile)
      4.3.7 Effectiveness of connector coupling devices
      4.3.8 Static load, transverse
      4.3.9 Vibration
      4.3.10 Shock
5 Test schedule
  5.1 General
      5.1.1 Arrangement for contact resistance measurements
      5.1.2 Arrangement for measurement of voltage proof,
            insulation resistance and polarization voltage
            during damp heat test, steady state
      5.1.3 Arrangement for dynamic stress tests
      5.1.4 Arrangement for flammability test
  5.2 Test schedule tables
      5.2.1 Basic test schedule
      5.2.2 Full test schedule
6 Quality assessment procedures
  6.1 Qualification approval testing
      6.1.1 Method 1
      6.1.2 Method 2
  6.2 Qualification conformance inspection
      6.2.1 Lot-by-lot tests
      6.2.2 Periodic tests
  6.3 Delayed delivery, re-inspection
Annex A (normative) Survey of coaxial contacts
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Committee
EPL/48
DevelopmentNote
Also numbered as IEC 61076-4-107. Supersedes 97/206255 DC. (12/2001)
DocumentType
Standard
Pages
48
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
DIN EN 61076-4-107:2002-04 Identical
I.S. EN 61076-4-107:2002 Identical
EN 61076-4-107:2001 Identical

IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
EN 60352-2:2006/A1:2013 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60352-3:1993 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60352-3:1994 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
IECQ 001002-3:2005 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60512-7:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
EN 60352-5:2012/AC:2014 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
IEC 60352-5:2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
IEC 61076-4:1995 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
IEC 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
IEC 60512-4:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
EN 60603-1:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality
IEC 60512-9:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
EN 60352-4:1994/A1:2000 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60512-5:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
IEC 60512-3:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
IEC 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequencyanalogue and in digital high-speed data applications - Part 4:Printed board connectors - Section 001: Blank detail specification

View more information
£246.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.