• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 61319-1:1996

Current
Current

The latest, up-to-date edition.

Interconnections of satellite receiving equipment Europe
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

26-04-2005

Foreword
Introduction
1 Scope
2 Normative references
3 Explanation of terms and abbreviations
4 Interface requirements for polarizers and
  polarswitches
  4.1 Mechanical polarizers (optional)
  4.2 Magnetic polarizers (using the Faraday effect)
      4.2.1 Polarizers for two orthogonal polarizations
      4.2.2 Polarizers for four polarizations
  4.3 Polarswitchers
5 Interface requirements for low-noise block
  converters (LNB)
  5.1 Characteristic impedance of the first intermediate
      frequency (IF) output
  5.2 Interface between the LNB (outdoor part) and the
      satellite receiver (indoor part), case 1: one IF
      input signal and one two-state control command
      5.2.1 Single-band block converters
      5.2.2 Dual-band block converters
      5.2.3 Combination of dual-band block converter
            with polarswitcher
  5.3 Interface between the LNB (outdoor part) and the
      satellite receiver (indoor part) case 2: two IF
      input signals and internal two-state control command
  5.4 Connectors
6 Interface requirements for switching between
  different antenna sources or antenna positions
  6.1 Electrical matching values for the actuator motor
      supply
  6.2 Electrical matching values for the antenna position
      sensor
  6.3 Interface between the antenna position control unit
      and the satellite receiver
      6.3.1 Circular connector
      6.3.2 Domestic Digital Bus (D2B)
7 Interface requirements for satellite receivers and
  external decoders, descramblers and conditional
  access systems
8 Interface requirements for Digital Satellite
  Radio (DSR) receivers
  8.1 Configuration of receiving equipment
      8.1.1 Direct reception of radio only
      8.1.2 Direct reception of radio and television
      8.1.3 Cable reception
  8.2 Audio-frequency outputs of DSR receivers
Annex A (informative) Interconnections between a satellite
                       receiver and a decoder
Annex ZA (normative) Normative references to international
                       publications with their corresponding
                       European publications
Annex ZB (normative) Communication between the satellite
                       receiver and the peripheral equipment
                       using the Digital Satellite Equipment
                       Control bus (DiSEqC)
Figures

Defines the interconnections and matching values for satellite receivers for individual T.V. and sound broadcast reception in the 10,70 GHz to 12,75 GHz band.

Committee
EPL/100
DevelopmentNote
Supersedes 94/204449 DC Also numbered as IEC 61319-1 (04/2005) Supersedes 98/230464 DC (05/2005)
DocumentType
Standard
Pages
38
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 5760-4:2003 Reliability of systems, equipment and components Guide to the specification of dependability requirements

BS EN 60933-4:1994 Audio, video and audiovisual systems. Interconnections and matching values Connector and cordset for domestic digital bus (D2B)
EN 61030:1993 Audio, video and audiovisual systems - Domestic Digital Bus (D2B)
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
HD 134.2 : 200S2 RADIO-FREQUENCY CONNECTORS - COAXIAL UNMATCHED CONNECTOR
IEC 60169-2:1965 Radio-frequency connectors. Part 2: Coaxial unmatched connector
IEC 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
HD 483.15 : 200S4 SOUND SYSTEM EQUIPMENT - PREFERRED MATCHING VALUES FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS
HD 483.11 : 200S3 SOUND SYSTEM EQUIPMENT - APPLICATION OF CONNECTORS FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS
BS EN 60958:1995 Specification for digital audio interface
IEC 60933-4:1994 Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B)
IEC 60958:1989 Digital audio interface
BS EN 60169-24:1994 Radio-frequency connectors Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
BS EN 61030:1993 Specification for domestic digital bus (D2B) for audio, video and audiovisual systems
BS 7239(1989) : AMD 8452 SPECIFICATION FOR DIGITAL AUDIO INTERFACE
EN 60933-4:1994 Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B)
IEC 60268-15:1996 Sound system equipment - Part 15: Preferred matching values for the interconnection of sound system components.
EN 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
IEC 61030:1991 Audio, video and audiovisual systems - Domestic Digital Bus (D2B)
EN 60169-24:1993 Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
BS 3041-2:1977 Radio-frequency connectors Specification for coaxial unmatched connector
IEC 60169-24:1991 Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
EN 60958:1990/A2:1995 DIGITAL AUDIO INTERFACE
IEC 60268-11:1987 Sound system equipment. Part 11: Application of connectors for the interconnection of sound system components
IEC 60807-9:1993 Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors

View more information
£232.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.