BS EN 61508-7:2010
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
30-06-2010
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
Annex A (informative) - Overview of techniques and
measures for E/E/PE safety-related systems:
control of random hardware failures
Annex B (informative) - Overview of techniques and
measures for E/E/PE safety related systems:
avoidance of systematic failures
Annex C (informative) - Overview of techniques and
measures for achieving software safety
integrity
Annex D (informative) - A probabilistic approach to
determining software safety integrity
for pre-developed software
Annex E (informative) - Overview of techniques and
measures for design of ASICs
Annex F (informative) - Definitions of properties of
software lifecycle phases
Annex G (informative) - Guidance for the development
of safety-related object oriented software
Bibliography
Index
Annex ZA (normative) - Normative references
to international publications with their
corresponding European publications
Specifies an overview of various safety techniques and measures relevant to IEC 61508-2 and IEC 61508-3.
IEC 61508-7:2010 contains an overview of various safety techniques and measures relevant to IEC 61508-2 and IEC 61508-3.The references should be considered as basic references to methods and tools or as examples, and may not represent the state of the art. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages.
NEW! Also available: IEC Standards+ 61508:2010, containing all parts, together with a commented Redline version. Changes made in this 2nd edition are highlighted and commented by a leading world expert.
This publication is of high relevance for Smart Grid.
Committee |
GEL/65/1
|
DevelopmentNote |
Renumbers and supersedes BS IEC 61508-7 (04/2002) 2002 Version incorporates amendment 13785 to BS IEC 61508-7. Supersedes 98/261466 DC. (05/2002) Also available as part of BS KIT 66 (06/2004) Supersedes 08/30193478 DC. (07/2010)
|
DocumentType |
Standard
|
Pages |
148
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN 61508-7 : 2011 | Identical |
EN 61508-7:2010 | Identical |
NBN EN 61508-7 : 2010 | Identical |
UNE-EN 61508-7:2011 | Identical |
I.S. EN 61508-7:2010 | Identical |
IEC 61508-7:2010 | Identical |
NF EN 61508-7 : 2011 | Identical |
PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
EEMUA 217 : 2011 | SAFE AND EFFECTIVE OPERATION OF STORAGE TANKS FOR OIL MOVEMENTS |
IEC 61025:2006 | Fault tree analysis (FTA) |
EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
EN 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61326-3-2:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
IEC 62308:2006 | Equipment reliability - Reliability assessment methods |
IEC 61000-4-1:2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
ISO 5807:1985 | Information processing Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 61326-3-2 : 2.0 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
IEC 61326-3-1 : 2.0 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
IEC 61160:2005 | Design review |
ISO 7185:1990 | Information technology Programming languages Pascal |
IEC 81346-1:2009 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
IEC 61078:2016 | Reliability block diagrams |
IEC 61165:2006 | Application of Markov techniques |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
ISO/IEC 8631:1989 | Information technology Program constructs and conventions for their representation |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
ISO/IEC TR 15942:2000 | Information technology Programming languages Guide for the use of the Ada programming language in high integrity systems |
IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
EN 61078 : 1991 | RELIABILITY BLOCK DIAGRAMS (IEC 61078:2016) |
EN 61163-1 : 2006 | RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS |
IEC 61163-1:2006 | Reliability stress screening - Part 1: Repairable assemblies manufactured in lots |
EN 61165:2006 | Application of Markov techniques |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
EN 60880 : 2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
ISO/IEC 10206:1991 | Information technology Progamming languages Extended Pascal |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 61164:2004 | Reliability growth - Statistical test and estimation methods |
EN 61025:2007 | Fault tree analysis (FTA) |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
IEC 60880:2006 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
ISO/IEC 1539-1:2010 | Information technology Programming languages Fortran Part 1: Base language |
ISO/IEC 9899:2011 | Information technology Programming languages C |
ISO/IEC 10514-1:1996 | Information technology — Programming languages — Part 1: Modula-2, Base Language |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
IEC 61506:1997 | Industrial-process measurement and control - Documentation ofapplication software |
EN 81346-1:2009 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
EN 61160:2005 | Design review |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC TR 61508-0:2005 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508) |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
ISO/IEC 8652:2012 | Information technology — Programming languages — Ada |
ISO 8807:1989 | Information processing systems Open Systems Interconnection LOTOS A formal description technique based on the temporal ordering of observational behaviour |
EN 61164:2004 | Reliability growth - Statistical test and estimation methods |
EN 62308 : 2006 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
ISO/IEC 10514-3:1998 | Information technology Programming languages Part 3: Object Oriented Modula-2 |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
IEC 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications |
EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
ISO/IEC 13817-1:1996 | Information technology Programming languages, their environments and system software interfaces Vienna Development Method Specification Language Part 1: Base language |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.