• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 61810-7:2006

Current
Current

The latest, up-to-date edition.

Electromechanical elementary relays Test and measurement procedures
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-07-2006

1 Scope
2 Normative references
3 Terms and definitions
4 Test and measurement procedures
  4.1 General
  4.2 Deviations
  4.3 Precision of measurement
  4.4 Power supplies
  4.5 Reference conditions for testing
  4.6 Visual inspection and check of dimensions
  4.7 Mechanical tests and weighing
  4.8 Relay coil properties
  4.9 Dielectric strength test
  4.10 Impulse voltage test
  4.11 Insulation resistance
  4.12 Contact-circuit resistance (or voltage drop)
  4.13 Functional tests
  4.14 Timing tests
  4.15 Climatic tests/sequence
  4.16 Damp heat, steady state
  4.17 Thermal resistance of the coil
  4.18 Heating
  4.19 Rapid change of temperature
  4.20 Enclosure
  4.21 Internal moisture
  4.23 Mould growth
  4.24 Robustness of terminals
  4.25 Soldering
  4.26 Shock
  4.27 Bump
  4.28 Vibration
  4.29 Acceleration
  4.30 Electrical endurance
  4.31 Mechanical endurance
  4.32 Thermal endurance
  4.33 Limiting continuous current
  4.34 Overload (contact circuit)
  4.35 Load transfer
  4.36 Electromagnetic compatibility
  4.37 Magnetic interference
  4.38 Cross talk and insertion loss
  4.39 Electrical contact noise
  4.40 Thermoelectric e.m.f
  4.41 Capacitance
  4.42 Contact sticking (delayed release)
  4.43 Magnetic remanence
  4.44 Acoustic noise
  4.45 Continuity of protective earth connection
  4.46 Fluid contamination
  4.47 Resistance to cleaning solvents
  4.48 Fire hazard
  4.49 Temperature rise at rated load
  4.50 Mechanical interlock
  4.51 Insertion and withdrawal force (mating relay and socket)
Annex A (normative) Heating test arrangement
Annex B (normative) Fire hazard testing
Annex C (normative) Test circuit for endurance tests
Annex D (informative) Inductive contact loads
Annex ZA (normative) Normative references to international
         publications with there corresponding European publications
Bibliography

States the test and measurement procedures for electromechanicalelementary relays. It covers basic considerations, which are, in general, common to all types of electromechanical elementary relays. Supplementary requirements may be necessitated by specific designs or application.

IEC 61810-7:2006 Lays down the test and measurement procedures for electromechanical elementary relays. Covers basic considerations which are common to all types of electromechanical elementary relays. Supplementary requirements may be necessitated by specific designs or application.

Committee
W/-
DevelopmentNote
Supersedes 04/30112662 DC (07/2006)
DocumentType
Standard
Pages
92
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
IEC 61810-7:2006 Identical
UNE-EN 61810-7:2007 Identical
NBN EN 61810-7 : 2006 Identical
DIN EN 61810-7:2007-02 Identical
SN EN 61810-7 : 2006 Identical
EN 61810-7:2006 Identical
NF EN 61810-7 : 2006 Identical
I.S. EN 61810-7:2006 Identical

IEC 60050-131:2002 International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
IEC 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
IEC 60068-2-68:1994 Environmental testing - Part 2-68: Tests - Test L: Dust and sand
EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
IEC 60512-7:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements
EN 60068-2-7:1993 Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
EN 60695-2-13:2010/A1:2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
IEC 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
EN 60068-2-17:1994 Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60068-2-10:2005 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
EN 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-2-68:1996 Environmental testing - Part 2: Tests - Test L: Dust and sand
IEC 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
EN 60068-2-29:1993 Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-13:1999 Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
EN 60999-1:2000 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60050-444:2002 International Electrotechnical Vocabulary (IEV) - Part 444: Elementary relays
EN 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
EN 60068-2-11:1999 Environmental testing - Part 2: Tests - Test Ka: Salt mist
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
EN 60695-2-12:2010/A1:2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
EN 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
EN 60068-2-45:1992/A1:1993 Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 61180-1:1994 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
£280.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.