BS EN 622-2:2004
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
30-11-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Requirements for general purpose boards
4.3 Requirements for load-bearing boards
5 Verification of compliance
5.1 General
5.2 External control
5.3 Factory production control
6 Marking
6.1 General purpose boards
6.2 Load-bearing boards
6.3 Colour coding
Annex A (normative) Supplementary properties
Annex B (normative) Boil test according to EN 1087-1:1995 -
Modified procedure
Annex C (normative) Determination of bending strength after
boil test according to EN 1087-1:1995 -
Modified procedure
Bibliography
Defines requirements for hardboards, relating to product properties, but not characteristic values for use in design calculations.
Committee |
B/541
|
DevelopmentNote |
Supersedes BS 1142(1989) (12/2003) Supersedes 93/101934 DC. (09/2005) Supersedes 03/315086 DC (11/2006)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 622-2 : 2004 COR 2005 | Identical |
DIN EN 622-2:2004-07 | Identical |
UNI EN 622-2 : 2005 | Identical |
NS EN 622-2 : 2004 AC 2006 | Identical |
SN EN 622-2 : 2004 | Identical |
NF EN 622-2 : 2004 | Identical |
EN 622-2:2004/AC:2005 | Identical |
I.S. EN 622-2:2004 | Identical |
UNE-EN 622-2:2004 | Identical |
NEN EN 622-2 : 2004 C1 2006 | Identical |
13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
DEFSTAN 61-12(PT25)/4(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10 MM[2] CROSS SECTIONAL AREA |
BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
BS 8203:2017 | Code of practice for installation of resilient floor coverings |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
DEFSTAN 61-12(PT9)/5(2008) : 2008 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 9: CABLES AND WIRES ELECTRICAL FOR CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS |
DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
DEFSTAN 61-12(PT5)/5(2008) : 2008 | WIRES, CORDS AND CABLES, ELECTRICAL-METRIC UNITS - PART 5: CABLES, SPECIAL PURPOSE, ELECTRICAL AND CABLES, POWER, ELECTRICAL (SMALL MULTI-CORE CABLES) |
11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
DEFSTAN 61-12(PT25)/5(2010) : 2010 | WIRES, CORDS AND CABLES ELECTRICAL - PART 25: WIRES AND CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10MM[2] CROSS SECTIONAL AREA |
DEFSTAN 02-643/3(2010) : 2010 | REQUIREMENTS FOR CABLES ELECTRICAL, SUB-MINIATURE AND SMALL MULTI-CORE, LIMITED FIRE HAZARD FOR SPECIAL PURPOSE |
BS 5268-2:2002 | STRUCTURAL USE OF TIMBER - PART 2: CODE OF PRACTICE FOR PERMISSIBLE STRESS DESIGN, MATERIALS AND WORKMANSHIP |
BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
BS 4965:1999 | Decorative laminated plastics sheet veneered boards and panels |
BS 5268-6.2(2001) : 2001 | STRUCTURAL USE OF TIMBER - PART 6: CODE OF PRACTICE FOR TIMBER FRAME WALLS - SECTION 6.2: BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING FOUR STOREYS |
11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
BS 5268-6.1:1996 | Structural use of timber Code of practice for timber frame walls - Dwellings not exceeding seven storeys |
PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
01/122607 DC : DRAFT JULY 2001 | BS 5325 - CODE OF PRACTICE FOR INSTALLATION OF TEXTILE FLOOR COVERINGS |
16/30348805 DC : 0 | BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
08/30154716 DC : DRAFT DEC 2008 | BS 5268-6-2 AMD1 - STRUCTURAL USE OF TIMBER - PART 6-2: CODE OF PRACTICE FOR TIMBER FRAME WALLS - BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING 4 STOREYS |
DEFSTAN 61-12(PT25)/3(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 MM[2] CROSS SECTIONAL AREA |
BS 5325:2001 | Installation of textile floor coverings. Code of practice |
EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 382-2:1993 | Fibreboards - Determination of surface absorption - Part 2: Test method for hardboards |
EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
ISO 3340:1976 | Fibre building boards — Determination of sand content |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.