• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN ISO 10535:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Hoists for the transfer of disabled persons. Requirements and test methods
Available format(s)

Hardcopy , PDF

Superseded date

04-11-2021

Language(s)

English

Published date

31-01-2007

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
   4.1 General requirements
   4.2 General test methods
   4.3 Safety requirements
   4.4 Requirements for body-support units
   4.5 Central suspension point
   4.6 Spreader bar
   4.7 Performance
   4.8 Rate (velocity) of lifting and lowering
   4.9 Operating forces/torques
   4.10 Durability
   4.11 Hydraulic components
   4.12 Pneumatic components
   4.13 Information supplied by the manufacturer
5 Mobile hoists - Specific requirements and test methods
   5.1 General requirements
   5.2 Static strength
   5.3 Static stability
   5.4 Immobilizing device (brakes)
   5.5 Moving forces
   5.6 Instructions for use
6 Standing and/or raising hoists - Specific requirements
   and test methods
   6.1 General requirements
   6.2 Static strength
   6.3 Static stability
   6.4 Immobilizing device (brakes)
   6.5 Moving forces
   6.6 Durability
   6.7 Instructions for use
7 Stationary hoists - Specific requirements and test
   methods
   7.1 General requirements
   7.2 Specific safety requirements
   7.3 Static strength (free-standing stationary hoists
         only)
   7.4 Static stability (free-standing stationary hoists
         only)
   7.5 Static strength for all other stationary hoists
   7.6 Instructions for use
8 Non-rigid body-support units - Specific requirements
   and test methods
   8.1 General requirements
   8.2 Requirements for material and seams of the non-rigid
         body-support unit
   8.3 Test methods for non-rigid body-support unit
   8.4 Information supplied by the manufacturer
9 Rigid body-support units - Specific requirements and
   test methods
   9.1 General requirements
   9.2 Requirements for backrest
   9.3 Requirements and test methods for durability
   9.4 Information supplied by the manufacturer
10 Bathtub hoists - Specific requirements and test methods
   10.1 General requirements
   10.2 General test methods
   10.3 Safety requirements
   10.4 Body-support units
   10.5 Spreader bar
   10.6 Performance
   10.7 Rate (velocity) of lifting and lowering
   10.8 Operating forces
   10.9 Durability
   10.10 Static strength and stability
   10.11 Hydraulic components
   10.12 Pneumatic components
   10.13 Specific safety requirements
   10.14 Non-rigid body-support units
   10.15 Rigid body-support units - Requirements
   10.16 Information supplied by the manufacturer
Annex A (informative) Structure of ISO 10535
Annex B (informative) Periodic inspection
Annex ZA (informative) Clauses of this EN addressing essential
                       requirements or other provisions of EU
                       Directives

Defines requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO 9999:2002: - 12 36 03 Mobile hoists with sling seats; - 12 36 04 Standing mobile hoists; - 12 36 06 Mobile hoists with solid seats; - 12 36 09 Hoist trolleys; - 12 36 12 Stationary hoists fixed to the wall/walls, floor and/or ceiling; - 12 36 15 Stationary hoists fixed to, mounted in or on another product; - 12 36 18 Stationary free-standing hoists; - 12 36 21 Body-support units for hoists.

This International Standard specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO9999:2002:

  • 123603 Mobile hoists with sling seats

  • 123604 Standing mobile hoists

  • 123606 Mobile hoists with solid seats

  • 123609 Hoist trolleys

  • 123612 Stationary hoists fixed to the wall/walls, floor and/or ceiling

  • 123615 Stationary hoists fixed to, mounted in or on another product

  • 123618 Stationary free-standing hoists

  • 123621 Body-support units for hoists

This International Standard does not apply to devices that transport persons between two levels (floors) of a building.

It does not include methods for the determination of ageing or corrosion of such hoists and units.

The requirements of this International Standard are formulated with regard to the needs of both the disabled persons being hoisted and the attendant using the hoist.

Committee
CH/173
DevelopmentNote
Supersedes 95/563244 DC (08/2004) Supersedes 04/30081057 DC. (01/2007) Reviewed and confirmed by BSI, September 2015. (09/2015)
DocumentType
Standard
Pages
62
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

17/30335834 DC : 0 BS 8300-2 - DESIGN OF AN ACCESSIBLE AND INCLUSIVE BUILT ENVIRONMENT - PART 2: BUILDINGS - CODE OF PRACTICE

EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
EN 1021-1:2014 FURNITURE - ASSESSMENT OF THE IGNITABILITY OF UPHOLSTERED FURNITURE - PART 1: IGNITION SOURCE SMOULDERING CIGARETTE
ISO 3758:2012 Textiles — Care labelling code using symbols
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
IEC 60601-1-2:2014 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
ISO 10993-1:2009 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
ISO 9999:2016 Assistive products for persons with disability Classification and terminology
ISO 14971:2007 Medical devices Application of risk management to medical devices
EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
EN 980:2008 Symbols for use in the labelling of medical devices
EN 1021-2:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)

View more information
£276.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.